- Year:
- 1973
- Length:
- 114
- Hull:
- Steel
- Builder:
- Fairhaven Shipyard
- Location:
- Alaska
114’x30’x11’ steel, single-crew crabber/tender built at Fairhaven Shipyard in 1973. Caterpillar 3512DI main engine rated at 1207 hp. Caterpillar 7261 gear with 3.84:1 ratio. Cruises at 10 knots. 180 kW Caterpillar 3306 and 190 kW Caterpillar 3306 gen sets. 40,000 g...
More Details- Year:
- 1986
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Alaska
32’x13’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Rozema in 1986. Detroit 6V92 rated at 430 hp w/ Twin Disc 509 gear. Updated turbo, exhaust, blower and injectors. IMS 7.5 ton RSW w/ (2) zones. Packs 12,500 lbs in (8) fish holds. Sliding Kinemati...
More Details- Year:
- 1985
- Length:
- 36
- Hull:
- Fiberglass
- Location:
- California
36’x12’x4.5’ fiberglass crabber/troller built in 1985. Cummins 6BTA 5.9 main rated at 315 hp. ZF Hurth gear. 150 gallon fuel capacity. Portable Honda 2kw generator. Deck equipment includes Junes crab block, davit, and outriggers. Single fish hold with raised hatch...
More Details- Year:
- 1975
- Length:
- 58
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...
More Details- Year:
- 1996
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All American Marine
- Location:
- Alaska
32’x13’x18” aluminum, double jet, RSW, Bristol Bay jet boat built by All American Marine in 1996. Twin Volvo Penta TAMD 63 each rated at 318 hp. Twin Hamilton 273 water jets. New IMS 8.5 ton RSW system. Packs 16k lbs in (8) fish holds. Sliding and spinning net reel...
More Details- Year:
- 1980
- Length:
- 55
- Hull:
- Steel
- Builder:
- Van Peer
- Location:
- California
55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...
More Details- Year:
- 1957
- Length:
- 125
- Hull:
- Steel
- Builder:
- Burtin Shipbuilding
- Location:
- Alaska
125’x32’x9’ steel tender built by Burton Shipbuilding in 1957. Twin Mitsubishi S6B3-MPTA mains rated at 385 hp each. Tonasco gear on port engine and Twin Disc 514 on starboard. John Deere 200kw and Northern Lights 40kw gensets. 17,000 gallon fuel capacity in (10) tan...
More Details- Year:
- 1968
- Length:
- 58
- Hull:
- Wood
- Builder:
- Tacoma Boat
- Location:
- Washington
58’x16’x8’ wood seiner built by Tacoma Boat in 1968. Cat 3406 main engine rated at 335 hp w/ Twin Disc gear. Northern Lights 20 kW genset. 2,400 gallons fuel capacity in (4) tanks. Packs 70k lbs in (2) newly conditioned fish holds. 18-ton RSW system. Recently refaste...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’ aluminum, RSW, flush deck Bristol Bay gillnetter built by Marco in 1980. CAT 3116 rated at 300 hp, new in 2008. Twin Disc MG507 gear. Fixed 200 fathom narrow reel, White drum drive, Maritime Fab auto levelwind and power roller. IMS 7.5 ton RSW system. Update...
More Details- Year:
- 1967
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Skookum Boatworks
- Location:
- Washington
44’x14’x6’ fiberglass troller/longliner built by Skookum Boatworks in 1967. John Deere 6068 rated at 200 hp. Twin Disc 506 gear w/ 3:1 ratio. IMS hydraulic 7.5 ton refrigeration system can be used for spray brine or RSW. Insulated fish hold packs 8 tons. Kolst...
More Details- Year:
- 1977
- Length:
- 58
- Hull:
- Steel
- Location:
- Alaska
58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...
More Details- Year:
- 1980
- Length:
- 58
- Hull:
- Steel
- Builder:
- Peacock
- Location:
- Alaska
58’x24’x8’ steel combination vessel built by Peacock in 1980. Sponsoned by Wahl. Cummins QSK19 main engine rated at 660 hp. Twin Disc MG-5202 gear with 4.5:1 ratio. 90 kW John Deere 6068 and 25 kW Isuzu gen sets. Packs 140k# salmon. 25 ton IMS RSW system. Deck equ...
More Details- Year:
- 1977
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Barrie Farrell/Snoball
- Location:
- Alaska
40’x11’x5’ fiberglass gillnetter/troller/longliner built by Barrie Ferrell/Snoball in 1977. Caterpillar 3208 NT main engine rated at 210 hp. Twin Disc 502 gear. Packs 10,000 in ice in (6) fiberglass insulated slush tanks. Deck equipment includes KEM drum w/ levelwin...
More Details- Year:
- 1949
- Length:
- 126
- Hull:
- Steel
- Builder:
- FB Walker and Sons, Inc.
- Location:
- Washington
126’x30’x12’ steel house-aft crabber/tender vessel built in 1949 by FB Walker and Sons, Inc. Twin Caterpillar 3408 DI main engines rated at 365 hp each. Twin Disc MG514 gears with 6:1 ratio. Twin 180 kW Caterpillar 3306 TA and (1) 40 kW John Deer 4045DFM70 gensets. P...
More Details- Year:
- 1973
- Length:
- 100
- Hull:
- Steel
- Builder:
- Toche Enterprises, Inc.
- Location:
- Washington
100’x25’x12’ steel, tender/crabber built by Toche Enterprises Inc in 1973. Converted to a Bering Sea crabber and lengthened 10’ in 1975. Detroit 16V71 rated at 480 hp w/ Capitol HPC10500 gear w/ 6:1 ratio. (2) Detroit 671 135 kW and Yanmar 45 kW. Packs 210k lbs salm...
More Details- Year:
- 1979
- Length:
- 58
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Washington
58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...
More Details- Year:
- 1992
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Maritime Fabrication
- Location:
- Alaska
32’x13’x36” fiberglass, flush deck, top house, Bristol Bay gillnetter built by Maritime Fab in 1992. Lugger 6125A rated at 460 hp w/ ZF310A gear. Maritime Fab. fixed reel, w/ auto levelwind and 36” stern roller. IMS 7.5 ton RSW system. Bow thruster. Packs 13k lbs i...
More Details- Year:
- 1964
- Length:
- 56
- Hull:
- Steel
- Builder:
- JM Martinac
- Location:
- Washington
56’x17’x8’ steel longliner/crabber built in 1964 by JM Martinac. John Deere 6125AFM75 main engine rated at 340 hp. Twin Disc MG516 gear with 4.5:1 ratio. 65 kW John Deere 4045TF genset. 2,800 gallons fuel capacity. Nshaft and bearings in 2022. Packs 65,000 salmon...
More Details- Year:
- 1957
- Length:
- 65
- Hull:
- Steel
- Builder:
- Raymond Dugat Company
- Location:
- Alaska
65’x19’x7’ steel tender built by the Raymond Dugat Company in 1957. Twin Detroit 671 mains rated at 165 hp each w/ Twin Disc 509 gears. Kubota 28kw MER genset. Fuel capacity of 4,200 lbs in (4) tanks. IMS titanium 23-ton RSW system, new in 2016. Packs 90,000 lbs in...
More Details- Year:
- 1980
- Length:
- 65
- Hull:
- Steel
- Builder:
- Irving Steel Fabrication
- Location:
- Oregon
65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Wood
- Location:
- Oregon
38’x11.4’x5’ wooden troller/crabber built in 1970 in Longview, WA. Perkins 6354 rated at 140 hp w/ Capitol gear. PTO connected with Pitts Clutch connected to 36 GPM hydraulic pump. Kolstrand (3) spool salmon gurdies, Junes crab block, trolling cockpit and anchor winc...
More Details- Year:
- 1965
- Length:
- 48
- Hull:
- Steel
- Builder:
- Pacific Boat Works
- Location:
- California
48’x16’x6’ steel charter vessel built in 1965 by Pacific Boat Works, Richmond, CA. Twin John Deere 8.1L each rated at 187 hp - new in 2004. Cruises at 11 knots. (2) fuel tanks w/ 1000 gallons combined capacity. Crab block, large walk around deck and live well. Elect...
More Details- Year:
- 1974
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
42’x13.9’x6’ fiberglass Delta built in 1974, rigged for spot prawns, salmon, and as a squid light boat. Volvo D-12 main rated at 450 hp. Twin Disc gear w/ 2:1 ratio. Kubota 18kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Fish hold packs 14 tons. Deck equi...
More Details- Year:
- 2016
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Strongback
- Location:
- Alaska
32’x14’ aluminum, Bristol Bay jet boat built by Strongback in 2016. John Deere 6090 AFM85 rated at 500 hp w/ ZF305-3 gear and Tractor NamJet 431HH water jet. Updated hydraulic bucket controls and Alpha Marine top house. Packs 13k lbs in (8) fish holds w/ (4) zones....
More Details- Year:
- 1976
- Length:
- 34
- Hull:
- Fiberglass
- Location:
- Oregon
34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...
More Details- Year:
- 1954/2015
- Length:
- 79
- Hull:
- Steel
- Builder:
- Olsen Shipyards Inc.
- Location:
- Alaska
79’x21x4.5’ steel, US Army LCM-8 built in 1954, converted to tender in 2014. Twin Cat 3406T mains rated at 335 hp w/ Twin Disc MG514-C gears, 2:1 ratio. Kort nozzles refurbished in 2015. John Deere 90kW and Cummins 45 kW gensets. 200k# capacity in (2) insulated fish...
More Details- Year:
- 1995
- Length:
- 99
- Hull:
- Steel
- Builder:
- Johnson
- Location:
- Washington
99’x25’x12’ steel tuna vessel built by Johnson in 1995. Caterpillar 3412 main engine rated at 525 hp. Twin Disc 510 gear. 28k gallons fuel capacity in (7) tanks. (2) 75 kW Caterpillar 3304 and 20 kW Isuzu gensets. Packs 200k# blast-frozen tuna in (7) insulated hold...
More Details- Year:
- 1970
- Length:
- 41
- Hull:
- Wood
- Location:
- California
41’x15’x5’ wood troller built in 1970 in Longview, WA. Includes CA salmon troll permit and 250 pot CA crab permit. Cummins 290 main engine rated at 180 hp. Twin Disc 509 gear. Burns 5 gph at 7 knots. Packs 4,500# of crab in (1) fish hold with aluminum insert. Deck...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12.5’x34” aluminum Bristol Bay boat built by Marco in 1980. John Deere 6068 main engine rated at 225 hp, rebuilt in 2019. Twin Disc MG506 gear with 2.5:1 ratio, rebuilt 2023. 15 kW Isuzu 3CDI genset. Packs 12k lbs in 10 fish holds, re-insulated in 2021. IMS 7.5 t...
More Details- Year:
- 2022
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Reutov
- Location:
- Alaska
32’x16.5’x20” aluminum, twin-jet Bristol Bay boat built by Reutov in 2022. Twin Cummins QSC8.3 main engines each rated at 600 hp. ZF gears with 340 Ultrajet water jets. Makes 43 knots WOT. Gets on step with 10k lbs onboard. 21k lbs capacity in (8) double-insulated...
More Details