TN20-002

$180,000
Year:
1967
Length:
64
Hull:
Wood
Builder:
Prince Rupert Boatyard
Location:
Washington

TN20-002

64’x18.6’x9’ wood, freezer tuna troller, built by Prince Rupert Boatyard in 1967. Aluminum house and bulwarks. Detroit 60 Series DDEC, rated at 470 hp w/ 36 hrs on full rebuild. Twin Disc 514 w/ 4.5:1 ratio. Detroit 371 w/ 75kW and Isuzu 15kW gensets. Fiberglass fi...

More Details

PL19-010

$145,000
Year:
1980
Length:
49
Hull:
Fiberglass
Builder:
Defever
Location:
Washington

PL19-010

49’x15’ fiberglass DeFever 49 Raised Pilothouse Cruiser, built in 1980, and rigged for trolling. Twin Ford Lehman Diesel 120 hp mains w/ Borg Warner gears. 12.5kw Onan genset w/ approx. 500 hrs. Fuel capacity of 800 gallons in (2) stainless tanks. (2) staterooms, (...

More Details

TR20-008

$99,000
Year:
1976
Length:
40
Hull:
Fiberglass
Builder:
Pelagic
Location:
Alaska

TR20-008

40’x11’ fiberglass troller built by Pelagic in 1976. Detroit 471 main engine rated at 150 hp. Twin Disc 506 gear with 2.96:1 ratio. Packs 14k# in (1) fiberglass fish hold. Deck equipment includes stabilizers, power gurdies, and haystack. Furuno GPS, radar and sound...

More Details

TR20-007

$135,000
Year:
1973
Length:
41
Hull:
Fiberglass
Builder:
Deltaga Boat Works
Location:
Washington

TR20-007

41’x11.5’ fiberglass troller built by Deltaga (B.C.) in 1973. Cummins 6BT rated at 201 hp, new in 2014. Twin Disc 206 gear w/ 3:1 gear ratio. Currently set up as an ice boat. Perkins 4108 aux w/ Carrier 05D 10 ton compressor, and Hp80 Freon blast freezer. Packs 13k l...

More Details

CR20-007

$285,000
Year:
1988
Length:
34
Hull:
Fiberglass
Builder:
Pelican
Location:
California

CR20-007

34’x12.5’x6.3’ fiberglass crabber/troller, built by Pelican in 1988. Cummins main rated at 152 hp w/ 2,500 hrs on rebuild. Twin Disc reduction gear. 8kw Lugger genset w/ 2,500 hrs. Packs 5,000 lbs crab in tanked hold. All deck equipment and gear for crab and salmon...

More Details

CR18-041

$150,000
Year:
1949
Length:
42
Hull:
Wood
Builder:
Poulsbo
Location:
California

CR18-041

42'x12.3'x6.8' wood troller rigged for crab, black cod, salmon, and albacore. Built by Poulsbo in 1949. Detroit 6-71 main. Fuel capacity of 500 gallons in (2) tanks. Entirely new hydraulic system in 2018. Includes (2) custom inserts for the fish hold, aluminum inse...

More Details

TR20-005

$200,000
Year:
1973
Length:
38
Hull:
Fiberglass
Builder:
Thermodyne
Location:
Alaska

TR20-005

38’x13.3’x7’ fiberglass power troller built by Thermodyne in 1973. Volvo MD70B main rated at 120 hp w/ approx 3,400 hrs. Twin Disc 506 gear. Fuel capacity of 375 gallons in (2) tanks. Insulated semi-tote fish hold packs 4,000 iced product. Fully rigged with all tro...

More Details

TN20-001

$600,000
Year:
1974
Length:
53
Hull:
Steel
Builder:
Trask
Location:
California

TN20-001

53’x18’x9’ steel combination tuna troller / bait boat built by Trask in 1974. Cat 3406T rated at 350 hp. Twin Disc 514 gear w/ 4.5:1 ratio. Isuzu 4BG1N 40 kW and Isuzu 4BG1T 50 kW gensets. (2) Carrier 5F60 compressors, (2) 15 hp motors, titanium condensers and Carve...

More Details

TR20-004

$400,000
Year:
1975
Length:
54
Hull:
Steel
Location:
Alaska

TR20-004

54’x16’x7.4’ steel troller/longliner, Ed Monk design, built in Fort Bragg, CA in 1975. New in 2015, John Deere 6090 rated at 300 hp w/ rebuilt Twin Disc 509 reduction gear. MER 30 kW genset, new in 2015. 06DR337 compressor new in 2015. Freezes a ton a day to -35F....

More Details

TR20-002

$127,000
Year:
1979
Length:
37
Hull:
Steel
Builder:
Robert F. Bilodeau
Location:
Alaska

TR20-002

37’x12.7’8.7’ steel, ketch style, freezer troller, built by Robert F. Bilodeau in 1979. GMC 4-71N rated at 110 hp w/ Twin Disc 506 MG. (2) insulated fish holds w/ 5 ton blast freeze unit, new in 2014. (2) Kolstrand 3 spool gurdies. Aluminum rigging, davit and shelte...

More Details

TR20-003

$10,000
Year:
1946
Length:
47
Hull:
Wood
Builder:
Tongass Boat Works
Location:
Alaska

TR20-003

44’x14’x5.9’ wood combination troller/LL/shrimp pot boat built by Tongass Boat Works in 1946. GMC 671N rated at 180 hp w/ Twin Disc 509 gear. John Deere 40 kW genset, rebuild, 2020. Insulated fish hold w/ 15 ton Rain County blast freezer. Aluminum trolling poles, ba...

More Details

TR15-002

$75,000
Year:
1970
Length:
36
Hull:
Fiberglass
Builder:
Albion
Location:
Alaska

TR15-002

36’x10.5’x5’ fiberglass troller/longliner, built in 1970 by Albion. Volvo MD70 rated at 120 hp, Capitol reduction gear. New Nidacore deck and rebuilt fish holds. Packs 12k lbs in (9) insulated fish holds. New sliding longline reel built by Precision Boatworks. Alumi...

More Details

CR20-002

$75,000
Year:
1936
Length:
33
Hull:
Wood
Builder:
Beviacqua
Location:
California

CR20-002

33’x11’ wood troller and crabber built by Beviacqua in 1936. Detroit 371 main engine rated at 120 hp. Borg Warner gear with 2:1 ratio. Makes 7 knots.  Deck equipment includes crab block and trolling gurdies. Electronics include VHF, GPS, radar, sounder, plotter...

More Details

LL20-001

$150,000
Year:
1965
Length:
48.5
Hull:
Wood
Builder:
Humbert
Location:
Washington

LL20-001

48.5’x13’x7’ wood combination vessel rigged for longline, trolling and potentially black cod soft pots. Built by Wilbur Humbert, double sawn Port Orford cedar frames, Purpleheart stem (new in 2013), owned and maintained by reputable shipwright. Detroit 671 main...

More Details

SP20-001

$145,000
Year:
1978
Length:
42
Hull:
Fiberglass
Builder:
Seahorse
Location:
Alaska

SP20-001

42’x12’x6.5’ fiberglass gillnetter/troller, built by Seahorse in 1979. Detroit 8v71 main rated at 330 hp. Twin Disc 509 gear. Fuel capacity of 450 gallons in (2) tanks. Honda 2000 portable generator. Packs around 11,000# in (6) tanked holds w/ spray foam insulation...

More Details

CO20-001

$105,000
Year:
1973
Length:
36
Hull:
Fiberglass
Builder:
Modutech
Location:
Alaska

CO20-001

36’x12’ fiberglass troller/combination vessel built in 1973 by Modutech. Volvo main engine rated at 380 hp. ZF IRM301P2 gear with 1.86:1 ratio. Makes 8 knots. Approximately 4,500# capacity in (3) insulated fish holds. Deck equipment includes 12” Hydroslave hualer,...

More Details

CR19-039

$185,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR19-039

32’x10’ fiberglass 1979 Radon fully rigged for crab with 250 pot CA crab permit good to 39’6” LOA and CA salmon permit. Cummins CTA 450 hp main with 1,350 hours. 12 to 14 knot cruise, 18 knot WOT. 300 gallons fuel capacity. 2,000# hold capacity, 3,000# in totes on d...

More Details

TR16-019

$110,000
Year:
1961
Length:
42
Hull:
Wood
Builder:
Williams Boat
Location:
Oregon

TR16-019

42’x12’ old growth timber, blast freeze, salmon/tuna troller built in 1961 by Williams Boat. Detroit 471 rated at 165 hp, rebuilt in 2012, low hours. Twin Disc 506 w/ 2:1 ratio. Isuzu 25 kw generator new 2013. Packs 12k lbs in insulated fish hold. 5 blade tuna prop....

More Details

TR19-045

$130,000
Year:
1979
Length:
36
Hull:
Fiberglass
Builder:
Marine Fiberglass Products
Location:
Alaska

TR19-045

36’x12’x5’ fiberglass troller built by Marine Fiberglass Products out of Anacortes WA, in 1979. Remanufactured Cummins 6BTA 5.9MI rated at 250 hp installed in 2009. Twin Disc MG 5061A w/ 2:1 gear ratio. (3) spool Easthope gurdies, 12” Hydro Slave line hauler, aluminu...

More Details

TR19-042

$135,000
Year:
1973
Length:
36
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

TR19-042

36’x11’x4’ fiberglass troller built in 1973 by Roberts in La Conner, WA. John Deere 6068 main engine rated at 210 hp. Twin Disc 506 gear. Makes 7.5 knots. 300 gallons fuel capacity in (2) tanks. Packs appx 3,500# in (2) holds. Recently reconditioned Kolstrand 3-sp...

More Details

TR19-044

$34,000
Year:
1974
Length:
32
Hull:
Fiberglass
Builder:
Pettis
Location:
Washington

TR19-044

32’ wood troller/longliner/crabber built in 1974 by Nulf. John Deere 6068 main engine. Microcommander 3-station controllers. 3-spool Simplex gurdies, tuna puller, and additional gear. New Dickinson stove. Electronics include VHF and Furuno radar, plotter, sounder,...

More Details

CO19-024

$190,000
Year:
1977
Length:
43
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

CO19-024

43’x14.5’x6.5’ fiberglass combination gillnetter/troller built by Delta in 1977. John Deere 6090 rated at 375 hp, new in 2016 w/ Twin Disc 509 gear w/ 2:1 reduction. Fully rigged to gillnet and pwr troll. Aluminum hayrack, (3) spool Simplex gurties, Kim Drive gillnet...

More Details

RS19-004

$350,000
Year:
1980
Length:
72
Hull:
Fiberglass
Builder:
Kelly-Wesport
Location:
Washington

RS19-004

72’x18.5’x7.5’ fiberglass vessel built by Kelly-Westport in 1980. Twin GMC 12V71 main engines rated at 500 hp each. Twin Disc MG 514 gears with 2.5:1 ratio. Makes 12 knots. 9 kW Northern Lights genset. 1,800 gallons fuel capacity. HIAB 3,000# crane and Capstan pede...

More Details

TN19-025

$149,000
Year:
1928
Length:
70
Hull:
Wood
Builder:
Ole Moberg
Location:
Washington

TN19-025

70’x16’x8’ wooden, schooner-style tuna troller, built by Ole Moberg in 1928. John Deere 6125 main engine rated at 350 hp. ZF V325 gear with 4.4:1 ratio. Isuzu 3SE1-BCGE1 auxiliary rated at 40 hp. 12 kW Isuzu 3CDI genset. 15 ton Bitzer blast freeze. 2,600 gallons fu...

More Details

TR19-025

$130,000
Year:
1963
Length:
48
Hull:
Fiberglass
Builder:
Uniflite
Location:
Washington

TR19-025

48’x14.5’ fiberglass salmon/tuna troller built by Uniflite in 1963. New Cummins 5.9L and ZF280 gear. New bulwarks and trolling poles. Kolstrand (2) 3 spool gurdies. Packs 12 tons in (1) insulated fish hold. 1000 gallons fuel capacity in (4) separate tanks. Electro...

More Details

LL19-020

$650,000
Year:
1974
Length:
52
Hull:
Fiberglass
Builder:
Little Hoquiam
Location:
Alaska

LL19-020

52’x16’x9’ fiberglass combination longliner/freezer troller, built by Little Hoquiam in 1974. GMC 8v71 main rated at 320 hp, w/ Twin Disc 509 gear. Isuzu 23 kW genset. Fuel capacity of 1,500 gallons in (4) tanks. Blast freeze system w/ 15 ton compressor, electric dr...

More Details

UT19-005

$55,000
Year:
1986/2013
Length:
40
Hull:
Fiberglass
Builder:
Snoball
Location:
California

UT19-005

40’x12’x5’ fiberglass vessel, Snowball hull built in 1986, finished in 2013. Currently rigged as sanitation vessel to pump holding tanks, but ready to be rigged for fishing. Detroit 310 hp 8v71 main w/ 450 ORIGINAL hours, and “crash box” gear. Hydraulic steering, and...

More Details

CR17-034

$325,000
Year:
1979
Length:
42
Hull:
Fiberglass
Builder:
Delta
Location:
Washington

CR17-034

42’x14’x3.5’ fiberglass crabber/seiner built by Delta in 1979, complete refit and tophouse added in 2012. Cummins 6CTA main rated at 255 hp, w/ 2,500 hours. Twin Disc 509 gear. 15 kw Isuzu genset w/ 2,800 hrs. Tanked fish hold packs 10,000 lbs crab. Deck equipment...

More Details

TR19-039

$175,000
Year:
1980
Length:
48
Hull:
Fiberglass
Builder:
Elmag Co.
Location:
Oregon

TR19-039

53’x15’x8.9’ Skookum fiberglass troller/sail rigged ketch built by Elmag Co. in 1980. GMC 471 rated at 120 hp w/ Twin Disc gear. New sails, bow sprit, sprit stay fittings, windows, electronics and Blue Seas wiring. Packs 20k lbs in insulated hold. Hasbro gurdies and...

More Details

TR19-038

$215,000
Year:
1987
Length:
37
Hull:
Fiberglass
Builder:
Wegley
Location:
Washington

TR19-038

37’x13’x5’ fiberglass combination vessel built by Wegley in 1987. Lugger 6125 main engine rated at 440 hp. Twin Disc 508 gear with 1.52:1 ratio. Isuzu 4kW genset. 650 gallons total fuel capacity including saddle tanks. Packs 18k# in (1) insulated fish hold. Crab i...

More Details

Sign up for email updates