- Year:
- 1978
- Length:
- 24
- Hull:
- Fiberglass
- Builder:
- Wellcraft
- Location:
- California
24’x8.5’x3’ fiberglass sport boat built by Wellcraft in 1978. Includes California Salmon troll permit. Volvo Penta angine rated at 350 hp, like new. Makes 28 knots. Mercruiser Bigfoot kicker. Bait well, electric down riggers, electric crab hauler, and lots of fishi...
More Details- Year:
- 1970
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Albion
- Location:
- Alaska
36’x10.5’x4’ fiberglass sternpicker, built by Albion in 1970. Volvo MD-70A rated at 140 hp. Capitol 2HEA reduction gear, includes spare gear. New hydraulic pump in 2024. Packs 10,000 in (7) holds setup for slush bags. KEM hydraulic drum and McElroy 40” hydraulic st...
More Details- Year:
- 1967
- Length:
- 92
- Hull:
- Steel
- Builder:
- Pac Fish
- Location:
- Washington
92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...
More Details- Year:
- 1976
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...
More Details- Year:
- 1976
- Length:
- 37
- Hull:
- Aluminum
- Builder:
- Freeman Marine
- Location:
- Oregon
37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...
More Details- Year:
- 1982
- Length:
- 31
- Hull:
- Fiberglass
- Location:
- California
31’x11.5’x6’ fiberglass salmon troller and open access longliner, custom built in 1982. Volvo D6 rated at 330hp w/ only 330 hours. Does 15-20 kts, burning 4-5 gph. Drop-in instert for fish hold. Deck equipment includes crab block, davit, salmon gurdies, and boom w/...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Roberts
- Location:
- Alaska
32’x11.5’ fiberglass sternpicker built in 1978 by Roberts. Volvo TAMC70D main engine rated at 260 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Packs 9k# in (6) insulated fish holds. Deck equipment includes Maritime Fab drum, levelwind, rower roller, and...
More Details- Year:
- 1942
- Length:
- 44
- Hull:
- Wood
- Builder:
- Jacobson Shipyard
- Location:
- California
44’x12’x6’ wood troller/crabber built in 1942 by Jacobson Shipyard in Tacoma, WA. Detroit 671 main w/ 7,408 hours and “crash box” reduction gear. 9kw Northern Lights genset. 14-ton fish hold w/ 6,000 lb crab tank insert. (2) Kolstrand 3-spool gurdies, aluminum outri...
More Details- Year:
- 1966
- Length:
- 44
- Hull:
- Steel
- Location:
- Oregon
44.9’x14’x7.8’ steel combination vessel rigged for crab, salmon, tuna, black cod, and built in 1966. Detroit 671 main rated at 210 hp, rebuilt in 2021. Twin Disc 509 reduction gear. Isuzu 21kw genset. Fish hold insert packs 8,500 lbs crab. Blast freeze system w/ 10...
More Details- Year:
- 1991
- Length:
- 52
- Hull:
- Fiberglass
- Builder:
- Roberts
- Location:
- Alaska
52’x17’x4’ fiberglass seiner built by Roberts in 1991. Lugger 6125 main rated at 400 hp. ZF400 gear w/ 2:1 ratio. Isuzu 4JBl 25kw genset. Fuel capacity of 950 gallons in (2) tanks. Insulated fish hold packs 55,000 lbs. 15-ton RSW system. Deck equipment includes K...
More Details- Year:
- 1976
- Length:
- 45
- Hull:
- Aluminum
- Builder:
- Freeman-Howard
- Location:
- California
45’x13.7’x7.2’ aluminum combination vessel rigged for crab and salmon, built by Freeman-Howard in 1976. Detroit 871 main rated at 310 hp w/ Twin Disc 509 gear. Isuzu 10kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Single tanked/insulated fish hold packs 12...
More Details- Year:
- 1980
- Length:
- 55
- Hull:
- Steel
- Builder:
- Van Peer
- Location:
- California
55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Wood
- Location:
- Oregon
38’x11.4’x5’ wooden troller/crabber built in 1970 in Longview, WA. Perkins 6354 rated at 140 hp w/ Capitol gear. PTO connected with Pitts Clutch connected to 36 GPM hydraulic pump. Kolstrand (3) spool salmon gurdies, Junes crab block, trolling cockpit and anchor winc...
More Details- Year:
- 2018
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- North River
- Location:
- Alaska
39’x10.5’ aluminum, North River Offshore, Voyager 3300, built in 2018. Rigged to pot fish and charter. Twin Suzuki DF350A each rated at 350 hp and installed new in June 2023. Suzuki DFATL2 40 hp kicker. Honda 20 hp engine powers hydraulic PTO. (3) integrated fish h...
More Details- Year:
- 1974
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
42’x13.9’x6’ fiberglass Delta built in 1974, rigged for spot prawns, salmon, and as a squid light boat. Volvo D-12 main rated at 450 hp. Twin Disc gear w/ 2:1 ratio. Kubota 18kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Fish hold packs 14 tons. Deck equi...
More Details- Year:
- 1963
- Length:
- 51
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Oregon
51.5’x14’x5’ fiberglass crabber built by Rawson in 1963. John Deere 6068TFM rated at 225 hp. Twin Disc MG5061 with 2.5:1 ratio. 20 kW Isuzu 4LE genset. Packs 8k# crab in forward hold, 4k# iced tuna in aft hold, both insulated. 10 ton spray brine refrigeration syste...
More Details- Year:
- 1970
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- Rohd
- Location:
- California
39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furuno radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California...
More Details- Year:
- 1979
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Formosa
- Location:
- California
40’x14’x3.5’ fiberglass troller also rigged for black cod, built in 1979 by Formosa Boat Building. 160 hp Perkins main w/ Twin Disc 373 gear. Lugger w/ 20 kw Northern Lights genset. Fish hold packs 8,000 lbs. Deck equipment includes set of 3-spool gurdies, longline...
More Details- Year:
- 1988
- Length:
- 43
- Hull:
- Fiberglass
- Builder:
- Cascade
- Location:
- California
43’x12’x6.5’ fiberglass troller built by Cascade in 1988. New Cummins 4.3L rated at 80 hp installed 2022 w/ Warner gear, rebuilt in 2022. One insulated fish hold packs 3,000 lbs. Includes gurdies and misc. salmon and tuna gear. Electronics include Raymarine GPS, rad...
More Details- Year:
- 1980
- Length:
- 40
- Hull:
- Steel
- Location:
- California
40.6’x14.7’x6.6’ steel live bait boat also rigged for squid with lights and brail gear. Cummins QSL9 main rated at 330 hp w/ Twin Disc gear. Northern Lights 30 kW genset. 75 gallon hydraulic system w/ (2) pumps off main. Packs 20-tons in tanked and insulated fish ho...
More Details- Year:
- 1993
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Nuwave
- Location:
- California
36’x12’x3’ fiberglass combination vessel, rigged as a crabber and squid light boat, built by Nuwave in 1993. CA brail squid permit included. Twin Tier 3 Cummins QSC 8.3 main engines, installed new in 2016, make 500 hp each. ZF286 marine gear. Makes (31) knots. 800...
More Details- Year:
- 1973
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- California
36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...
More Details- Year:
- 1965
- Length:
- 42
- Hull:
- Wood
- Builder:
- Remen
- Location:
- Oregon
42’x12’x7’ wood troller/crabber with permits, built by Remmen in 1965. Detroit v6-71 main rated at 165hp w/ Capital gear. Fuel capacity of 800 gallon in (4) tanks. Fiberglassed fish hold packs 8 tons iced tuna, and 8k lbs crab in insert. Deck equipment includes 19” J...
More Details- Year:
- 1946
- Length:
- 56
- Hull:
- Wood
- Builder:
- Grandy
- Location:
- Washington
56’x16.5’x 8’ wood seiner built in 1946 by Grandy. Detroit 871 rated at 350 hp w/ Twin Disc gear. Burns 5 gph at 8.5 knots. Isuzu 40 kW auxiliary. Packs 65k lbs in (2) fiberglass fish holds. RSW w/ 18 ton compressor. Rowe deck winch w/ E-Stop, Marco 26” pwr block...
More Details- Year:
- 1967
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- California
38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...
More Details- Year:
- 1928
- Length:
- 46
- Hull:
- Wood
- Builder:
- Strom & Orum
- Location:
- California
46’x13’x7’ wood troller/crabber with permits, built in 1928 by Strom and Orum in Tacoma, WA. Detroit 671 main rated at 165 hp, w/ 2,500 rebuilt hrs. Twin Disc 509 gear. Perkins 7.5 kW genset. Fish hold packs 24,000# not tanked, 9,000# in crab instert, and 6,000# sal...
More Details- Year:
- 2005
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Custom
- Location:
- California
34’10”x16’x4’ custom aluminum vessel built in 2005 and significantly updated in 2016, rigged for crab and troll fisheries. John Deere 6068 main rated at 330 hp w/ 8,700 hours. ZF 22A gear. Westerbeke 7.6 kW genset. 260 gallon fuel tank. Tanked fish hold packs 6,000...
More Details- Year:
- 1993
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Wegley
- Location:
- Alaska
32’x13’x36’ top house, Jumbo Wegley built in 1993. Detroit 6V92 rated at 525 hp w/ Twin Disc 5091 gear. Startups and repairs by Johnson Diesel. PacWest 7.5 ton RSW system installed in 2019. Articulating drum, Twister drive, levelwind, Maritime Fab. roller and anchor...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Workboats Northwest
- Location:
- Alaska
32’x11’x5.3’ aluminum, flush deck, RSW, Bristol Bay sternpicker built in 1980 by Workboats Northwest. Cummins QSB 5.9 main rated at 380 hp and Twin Disc 507 gear. 5 ton Pac West RSW system, rebuilt in 2020. 11k pounds total capacity. (2) Eaton 3.8 cube hydraulic ...
More Details- Year:
- 1974
- Length:
- 65
- Hull:
- Wood
- Builder:
- Frostad
- Location:
- California
65’x20’x9’ wood Canadian crabber/troller built by Frostad in 1974. Detroit 12V71 main rated at 350 hp w/ Twin Disc gear. 20kw John Deere and 30kw Detroit 3V71 gensets. Packs 100,000 lbs salmon in (4) tanked/insulated holds. Includes all deck equipment for crab and s...
More Details