Vessels - Draggers

58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna.  Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017.  Cummins K19 main rated at 600 hp, new in 2017.  Twin Disc gear.  100kW and 65kW...

72’x22’x10’ steel combination vessel. Monk-design, built by Duke’s Welding in 1980. Currently set up as a crabber/shrimper/tuna. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW...

58’x24’x8’ steel combination vessel built by Peacock in 1980. Sponsoned by Wahl. Cummins QSK19 main engine rated at 660 hp. Twin Disc MG-5202 gear with 4.5:1 ratio. 90 kW John Deere 6068 and 25 kW Isuzu gen sets. Packs 140k# salmon. 25 ton IMS RSW system. Deck equ...

65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...

80’x29’x11’ steel dragger/combination vessel built in 1980 by Allied Shipyard, overhauled in 2001. Cat 3508 main engine rated at 805 hp. Twin Disc 540 gear. Makes 9 knots. Isuzu rated at 350 hp drives hydraulics. 100 kW Isuzu and 33 kW Daewoo gen sets. (2) 88 hp D...

68’x20’x8’ wood shrimp trawler w/ permits, built by Toche Boats in 1965. 855 Cummins main rated at 325 hp, w/ Twin Disc 509 gear. Isuzu 4JB1 30kw genset. Fuel capacity of 2,800 gallons in (4) tanks. Fish hold capacity of 50,000 lbs shrimp. Deck equipment includes h...

115’x30’ steel trawler built by Bender Shipbuilding in 1984. Caterpillar D35167 main engine rated at 1700 hp. Reintjes WAF870 gear, 6.044:1 ratio. 78”, four-blade, stainless steel prop. 320 kW GMC 12V71, 320 kW GMC 8V92, and 99 kW John Deere gen sets. 15k gallons f...

112’x30’ steel trawler built by Eastern Shipyards in 1981. Twin Caterpillar 3412 main engines rated at 725 hp each. Twin Disc MG5222 gears, 5:1 ratio. 61”, four-blade, bronze props. (3) 190 kW Caterpillar 3306 gen sets. Hydraulics for haul back driven by additional...

132’x32’x8’ steel factory trawler built in 1983 by Bender. General Electric 8V228 marine diesel electric main engine rated at 1,753 hp, raw water-cooled. Man B & W Alpha 27V 014 marine gear with 2.68:1 ratio. Cummins KT19 and Cummins KTA 19G2 gen sets make 470 kW eac...

32’x12’ aluminum shrimper built by Tanaboat Enteprises Ltd. in Vancouver, BC, in 1976. Twin Volvo TAMD60 main engines rated at 255 hp. Twin Disc 506 gears with 2.5:1 ratio. Makes 11 knots. 420 gallons fuel capacity in (2) tanks. Yanmar gen set for freezer. Gear in...

42’x12.5’x5.6’ wood combination vessel rigged for trawl and salmon troll, built in 1946 at John’s Boatshop, Wilmington, CA. John Deere 6081 main rated at 230 hp and Tonanco gear w/ 3:1 ratio. Cruises at 7.5-8 kts and burns 2.5 gal/hr. Northern Lights 6kw genset. Fis...

73’x22’x8.3’ steel shrimp trawler built by Portier in 1993, and also rigged for crab and bottom trawling. CAT 3408 main rated at 470 hp, w/ Twin Disc 516c reduction gear. Detroit 371 30kw and John Deere 6068t 100kw genset w/ PTO electric clutch to run all hydros. 11,0...

62’3.5"x19’x10’ steel combination vessel rigged for trawl and tuna. Monk design, built by OK Welding in 1979. Cummins KT 1150 main w/ Twin Disc 514 gear. 6-cyl John Deer aux and 40kW Isuzu genset. 6,000 gal fuel capacity in (6) tanks. Blast freeze system, 5F40 comp...

98’x27.5’x12’ fiberglass combination tender/dragger built by Master Marine, Inc in 1992. Cat 3512 rated at 1750 hp w/ top end rebuild in 2017.  New Reintjes reduction gear, installed 2022. Cat 3408 300 kW and Cat 3306 150 kW gensets. Packs 300k lbs total in...

186’x40’ steel oceanographic research/utility vessel built in 1990 by McDermott Shipyards. Cummins KTA50M main engine rated at 1,250 hp. Reintjes gear with 7.053:1 ratio. Ulstein azumith stern drives, 300 hp each, with 3:1 ratio. Bow thruster. (3) Cummins VTA 600 k...

124’x32’x11’ factory trawler built in 1979 by Marine Industries Northwest. Man B&W Alpha model 10V23LU main engine rated at 1,450 hp. Alpha reduction gear. Twin 250 kW Cat 3406 B gensets. Fully operational factory. Approximately 190mt capacity for finished, frozen...

63’x17.7’x8’ steel combination vessel, rigged for bottom trawling, built by Mike Brown in Port Hueneme, CA. Isuzu UM6WG main rated at 505 hp and Twin Disc 514 gear. PTO drives (2) 60 gpm pumps. John Deere 40 kW genset w/ Vickers 20 gpm pump. Packs 70,000# iced groun...

71’x21’x11’ steel trawler, built 1976 in Bayou La Batre, Alabama. CAT 3408 main rated at 360 hp, w/ Twin Disc reduction gear. Fish hold packs 164,000#. Deck equipment includes (2) hydraulic winches, (2) spare winches, net reel, (4) pairs of doors, and (5) nets rangin...

70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 t...

194.5'x40'x19' trawler, built in 1974 by Southern Shipbuilding, converted to fishing in 1990. Twin Cat mains rated at 3,300 hp ea, Reintjes gears and 4 blade variable pitch props. Hydraulic bow thruster. (3) Cat 3406B 290 kw gen sets. (6) fish holds refrigerated wit...