DV20-001

$75,000
Year:
1991
Length:
25
Hull:
Fiberglass
Builder:
Radon
Location:
California

DV20-001

25’x8.5’x2’ fiberglass Radon dive boat, built in 1991, and only one owner. 320 hp Mercruiser 383 Magnum Stroker and Bravo drive w/ only 185 hrs. Kelp knife, upper drive shower, SS four-blade prop, and trim tabs. Cruises at 16-22 kts, 30+ kts WOT. Fold down mast and...

More Details

CR19-039

$185,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR19-039

32’x10’ fiberglass 1979 Radon fully rigged for crab with 250 pot CA crab permit good to 39’6” LOA and CA salmon permit. Cummins CTA 450 hp main with 1,350 hours. 12 to 14 knot cruise, 18 knot WOT. 300 gallons fuel capacity. 2,000# hold capacity, 3,000# in totes on d...

More Details

SP19-014

$90,000
Year:
1977
Length:
36
Hull:
Fiberglass
Builder:
Okabi
Location:
Alaska

SP19-014

36’x11’x4’ fiberglass sternpicker/dive boat built by Okabi Boat Work, in B.C., in 1977. Cummins 6BTA 5.9L rated at 210 hp. Borge Warner Velvet drive reduction gear. Rebuilt deck, cabin, and fish holds. (3) Insulated fish holds pack 10k lbs. Kem gear net reel, power...

More Details

CR19-037

$195,000
Year:
2016
Length:
32
Hull:
Aluminum
Builder:
Hard Drive Marine
Location:
California

CR19-037

32’x11.8’x2’ aluminum crabber/combination vessel, built by Hard Drive Marine in 2016. Dual Yamaha F300NCA outdrives w/ 1,600 hours and new lower units in 2019. Fuel capacity of 300 gallons. 30kt cruise at 4,400 rpm, burning 1.2 gph total. 13hp Honda power pack w/ re...

More Details

UT19-006

$70,000
Year:
1991
Length:
33
Hull:
Aluminum
Location:
Washington

UT19-006

33’x10’x3’ aluminum utility vessel, rigged as oil response boat, built in 1991. CAT 3208 main rated at 210 hp w/ less than 300 hours. Makes 12 knots. Spray foam insulated cabin and forepeak w/ (2) berths. Tow post on deck and forward push knees. Garmin combo unit w...

More Details

SP19-008

$150,000
Year:
1979
Length:
36
Hull:
Fiberglass
Builder:
Mel Martin
Location:
Alaska

SP19-008

36’x11.5’x6’ fiberglass sternpicker built in 1979. by Mel Martin. CAT 3116 main engine rated at 350 hp. Brand new ZF gear with 2.5:1 ratio. (3) steering stations. Packs 12k# in insulated fish holds. Head with shower. Electronics include VHF, GPS, radar, sounder, p...

More Details

SP18-025

$135,000
Year:
1985
Length:
38
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP18-025

38'x12'x4' fiberglass sternpicker/dive built by Roberts in 1985. Cat 3126 rated at 350 hp w/ Twin Disc MG507 gear. 300 ftm net reel w/ levelwind and power roller. (7) fish holds pack 15k lbs salmon. Includes dive ladder, cuke/geoduck table, LL drum, ground line w/...

More Details

CR15-019

$30,000
Year:
1987
Length:
26
Hull:
Fiberglass
Builder:
home built
Location:
Washington

CR15-019

26'x9'x2.5' fiberglass combination skiff built in 1987. 270 Crusader gas main with a new propellor. 350 Mercrusier spare main. 100 gallon aluminum fuel tank. 15 knot cruise. Fuel tanks, Aft deck, and gunnels new in 2009. Aluminum crab davit, 12" block and spare pr...

More Details

Sign up for email updates