TE19-012

$2,000,000
Year:
1991
Length:
106
Hull:
Steel
Builder:
LaForce Shipyard
Location:
Washington

TE19-012

106’x26’x10’ steel crabber/tender, built by LaForce Shipyard in 1991. Twin 500 hp John Deere 6135 mains, each w/ Twin Disc 516 gears, all new in 2017. (2) 175kw John Deere 6081 gensets. Packs 400k pounds in (3) insulated holds, w/ 60 ton RSW system. Walk-in bait fre...

More Details

TE19-011

$450,000
Year:
1943
Length:
86
Hull:
Steel
Builder:
Maritime Shipyards
Location:
Alaska

TE19-011

86’x26’x8’ wood and steel alloy tender built in 1943 by Maritime Shipyard. Twin Cummins NT-855 main engines rated at 400 hp each. Low hours on factory rebuilds. Twin Disc MG514 gears with 3:1 ratio. 175 kW John Deere 6081A and 150 kW Cat 3306 gensets. Packs 20...

More Details

CO19-027

$1,350,000
Year:
1975
Length:
100
Hull:
Steel
Builder:
Bender
Location:
Alaska

CO19-027

100’x24’x11’ steel combination tender/crab/pot boat built by Bender in 1975. Cat D398 rated at 850 hp w/ Cat 7271 marine gear. (2) New John Deere 99 kW and 156 kW gensets. Updated IMS 50 ton RSW system w/ new piping. Packs 250k lbs in (2) insulated fish holds. Yaqu...

More Details

TE17-015

$395,000
Year:
1952
Length:
119
Hull:
Steel
Builder:
Pictou Foundry and Machine
Location:
Washington

TE17-015

119’x30’x17’ steel tender, built in 1952 by Pictou Foundry and Machine in Nova Scotia, Canada. CAT 3508 main rated at 750 hp, w/ 6,800 hours on rebuild. Twin Disc MG 540 gear. Two 180 kW CAT 3306 gensets. 15,000 gallon fuel capacity in (3) steel tanks. Packs 500,000...

More Details

CO19-026

$780,000
Year:
2014
Length:
50
Hull:
Fiberglass
Builder:
Maritime Fab
Location:
Alaska

CO19-026

50’x18’ fiberglass combination crab/shrimp/tender built by Maritime Fab in 2014. Scania D112 rated at 650 hp w/ ZF 360 reduction gear. MER MG 18 kW genset. (4) tankable fish holds pack 60,000 lbs combined. 6 ton electric RSW system. Main boom w/ (3) winches, single...

More Details

LL19-022

$1,200,000
Year:
1970
Length:
82
Hull:
Steel
Builder:
Bender/Yaquina
Location:
Alaska

LL19-022

82’x22’x10’ steel longliner/combination/tender vessel built by Bender in 1970, refitted by Yaquina in 2010. Isuzu UM6WGIWM-ABI main engine rated at 505 hp. Twin Disc 5170DC gear with 5.95:1 ratio. John Deere 6068 99 kW and John Deere 6080 172 kW gensets. 10k gallons...

More Details

TE19-010

$350,000
Year:
1952
Length:
65
Hull:
Steel
Builder:
National Steel and Shipbuilding
Location:
Alaska

TE19-010

65’x18’ steel tender built for the US Army in 1953. GMC 8V71 rated at 350 hp, rebuilt in 2012. Twin Disc 509 gear w/ 3.83:1 ratio. Cruises at 9.5 knots. 10” American bow thruster. Yanmar 40 kW and John Deere 40 kW gensets. Haib folding knuckle crane. IMS 18 ton R...

More Details

TE19-009

$450,000
Year:
1944
Length:
105
Hull:
Wood
Builder:
Martinolich
Location:
Washington

TE19-009

105’x30’x9’ wood power scow built in 1944 by Martinolich. Twin Cummins NT855-N main engines rated at 430 hp each. Twin Disc 5114-DC gears with 4.86:1 ratio, new 2019. 100 kW GMC 8V71, 150 kW GMC 671, and 40 kW John Deere gen sets. 7.5k gallons fuel capacity in (3) ta...

More Details

CO19-023

$775,000
Year:
1983
Length:
56
Hull:
Steel
Builder:
Frank James
Location:
Alaska

CO19-023

56’x19’x8’ steel combination vessel built in 1983 by Frank James. Cummins QSL9 main engine rated at 440 hp. Twin Disc 509 gear with 4:1 ratio. Northern Lights 10 kW and Cummins 40 kW gensets. Packs 66k# in (2) fish holds. 15 ton RSW system. Aluminum bait house, li...

More Details

CR19-033

$399,000
Year:
1978
Length:
56
Hull:
Steel
Builder:
Wayne Gray
Location:
Washington

CR19-033

56’x19.2’x6.3’ steel crabber/tender, built by Wayne Gray in 1978. Deck extended by 4’ fantail on stern. Cummins N-14 main rated at 450 hp. Twin Disc 514 gear. 65 kW John Deere genset w/ Pitts electric clutch and 25 gpm Vickers pump. 3,000 gallons fuel capacity. 25...

More Details

CR19-032

$1,900,000
Year:
1979
Length:
109
Hull:
Steel
Builder:
MD Phares Boat Construction
Location:
Alaska

CR19-032

109’x30’x14’ steel crabber/tender built by M.D. Phares Boat Construction in 1979. Twin CAT 3412 main engines, each rated at 650 hp, rebuilt in 2019. ZF 3710 gears with 5.952:1 ratio. 185 kW John Deere 6090L, 65 kW CAT 3306 gensets, Perkins hotel unit. Makes 10 knots...

More Details

CR19-031

$1,800,000
Year:
1978
Length:
76
Hull:
Steel
Builder:
Carl Berg
Location:
Washington

CR19-031

76’x22’x12’ steel crabber/tender built in 1978 by Carl Berg. Isuzu main engine rated at 600 hp. Twin Disc 514C gear with 6:1 ratio. 65 kW John Deere 4045, 42 kW Lugger gensets. Packs 165k# in (3) fish holds. 30 ton RSW system. Electronics include (2) VHF, (2) GPS,...

More Details

CO19-021

$261,000
Year:
1972
Length:
51
Hull:
Fiberglass
Builder:
Pelagic Industries
Location:
British Columbia

CO19-021

51’x15’x8’ fiberglass combination vessel built in 1972 by Pelagic Industries. Gardner 8LXEB main engine rated at 167 hp. Twin Disc 509 gear with 2.91:1 ratio. Perkins 4108 genset. Appx 1,000 gallons fuel capacity in (1) tank. Packs 90k# in (3) holds. Pullmaster wi...

More Details

DR19-008

$2,150,000
Year:
1972
Length:
98
Hull:
Steel
Builder:
Toche Enterprises
Location:
Alaska

DR19-008

98’x25’x12’ steel stern trawler built in 1972 by Toche Enterprises in Ocean Springs, Mississippi.  Currently in service as a trawler and tender.  Twin John Deere 6125 AFM 75 main engines rated at 400 hp each.  176 kW and 165 kW GMC 871 gensets. ...

More Details

TE19-008

$575,000
Year:
1980
Length:
59.5
Hull:
Fiberglass
Builder:
Frostad
Location:
Alaska

TE19-008

59.5’x18’x11’ fiberglass longliner/tender.  Built in 1980 by Frostad in Vancouver, BC.  Cummins KTA1150 450 hp main engine rated at 450 hp.  Twin Disk 503 gear with 4.5:1 ratio.  5.5 kW Yanmar genset.  Packs 150,000k# in (2) holds.  20 ton...

More Details

TE19-007

$700,000
Year:
1981
Length:
112
Hull:
Steel
Builder:
Eastern Shipyard
Location:
Massachusetts

TE19-007

112’x30’x10’ steel tender vessel currently used as a packer on the East Coast, built by Eastern Shipyard in 1981.  Twin CAT mains rated at 725 hp each, w/ Twin Disc 522 gears.  190kW CAT 3306 genset that runs large capacity hydraulic system w/ single and dual...

More Details

CO18-029

$2,000,000
Year:
1980
Length:
72
Hull:
Steel
Builder:
Duke's Welding
Location:
Oregon

CO18-029

72'x22'x10' steel combination vessel. Monk-design, built by Duke's Welding in 1980. Currently set up as a crabber/shrimper. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW Isuzu g...

More Details

TE19-006

$1,050,000
Year:
1969
Length:
104
Hull:
Steel
Builder:
Marco
Location:
Washington

TE19-006

104'x25'x12' steel crabber/tender built by Marco in 1969. CAT D348 main engine rated at 750 hp, CAT gear. (2) CAT 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...

More Details

TE19-004

$195,000
Year:
1929
Length:
63
Hull:
Wood
Builder:
Bellingham Ship
Location:
Washington

TE19-004

63'x25'x6.4' wooden Whatcom County ferry converted over to a AK tote tender. Built by Bellingham Ship in 1929. Detroit 671 rated at 150 hp and Twin Disc 509 gear w/ 4:1 ratio. Isuzu 20kW genset. Shallow V bottom, single flush deck, steel house and galvanized bulwarks...

More Details

CO19-005

$2,888,888
Year:
1991
Length:
113
Hull:
Steel
Builder:
Giddings Boat Works
Location:
Alaska

CO19-005

113'x28'x7' steel combination Bering Sea crabber/tender built by Giddings Boat Works in 1991. Twin Cummins QSK-19 each rated at 600 hp and Twin Disc MG516 reduction gears. Iveco w/ 35 kW and (2) Cummins 6CTA w/ 125 kW gensets. (3) refurbished fish holds pack 365k lbs...

More Details

CO18-037

$600,000
Year:
1978
Length:
57
Hull:
Steel
Builder:
Lasqueti Boat Company
Location:
Alaska

CO18-037

57.9'x22'x7.5' steel combination longline/tender/pot vessel built in B.C in 1978 and sponsoned in 2008 by Arrow Marine. Cummins 855 rated at 410 hp w/ rebuilt Twin Disc 514 gear. Isuzu 22kW getset. New John Deere 4045 powers a 6 and 4 cube hydraulic pumps. 30 ton Ca...

More Details

CO18-038

$2,500,000
Year:
2000
Length:
58
Hull:
Steel
Builder:
Fred Wahl Marine
Location:
California

CO18-038

58'x28.5'x13' combination vessel built in 2000 by Fred Wahl Marine. Cat 3412 main rated at 615 hp. Reintjes gear w/ 6:1 ratio. 190 kW Cat 3306, 105 kW Cat 3304, and 55 kW Cat 3304. Bulbous bow and 16" bow thruster. Packs 300,000# in (2) holds. 50 ton RSW system w/...

More Details

TE18-018

$1,400,000
Year:
1980
Length:
98
Hull:
Steel
Builder:
Bender
Location:
Alaska

TE18-018

98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks...

More Details

SE18-016

$1,200,000
Year:
1990
Length:
56
Hull:
Fiberglass
Builder:
Hoquiam
Location:
Alaska

SE18-016

56'x18'x6' fiberglass seiner/tender, built by Hoquiam in 1990. Cummins 855 main rated at 370 hp, rebuilt in 2013. Isuzu 40kw genset. IMS 20 ton RSW system. Packs 120,000 salmon in (2) insulated holds. Complete electronics package. Call for more information and cur...

More Details

TE18-012

$299,900
Year:
1979
Length:
76
Hull:
Steel
Builder:
Erwin Pope
Location:
Alaska

TE18-012

76'x16'x4' steel scow built in 1979 by Erwin Pope. Currently operated as a tender. Twin GM 871 mains rated at 315 hp each. Twin Disc 509 gear with 2:1 ratio. 85 kW Mitsubishi and 65 kW Northern Lights gen sets. Packs 100,000# in (2) holds. 25 ton IMS RSW and 16.8...

More Details

CR18-030

$595,000
Year:
1981
Length:
52
Hull:
Steel
Builder:
Jack St. Clair
Location:
Oregon

CR18-030

52'x20'x7' steel crabber/longliner/tender built by Jack St. Clair in 1981, and sponsoned in 2008 at Giddings. Cummins 855 main rated at 300 hp. Twin Disc 509 gear w/ PTO and 30 gpm hydraulic pump. 25kW and 30kW Northern Lights gensets. 18 ton IMS RSW system. All ne...

More Details

DR18-003

$950,000
Year:
1974
Length:
127
Hull:
Steel
Builder:
Martinolich
Location:
Washington

DR18-003

127’x29’x14’ trawler, built in 1977 by Martinolich. Cat D399TA V-16 main rated at 1,125 hp with Cat 7261 marine gear, 3.84:1 ratio. 83” diameter x 65” pitch four-bladed stainless steel Kaplan, tunnel type propeller, shrouded within a 85” i.d. Kort nozzle. Packs 450,00...

More Details

TE18-008

$3,000,000
Year:
1978
Length:
150
Hull:
Steel
Builder:
Halter Marine Services, Inc.
Location:
Alaska

TE18-008

150'x38'x16' steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds. Recentl...

More Details

CR18-025

$650,000
Year:
1982
Length:
45
Hull:
Steel
Builder:
Martin Allen
Location:
California

CR18-025

45.9'x20'x6.6' steel crabber built by Martin Allen in 1982, completely rebuilt and sponsoned in 2015. Detroit 8v71 rated at 300 hp, rebuilt in 2015. Twin Disc MG 5111. Cummins 40kW genset w/ approx. 2,800 hrs. Packs 22k# crab. 20 ton IMS blast freeze RSW unit. Elec...

More Details

TE18-007

$45,000
Year:
1942
Length:
79
Hull:
Wood
Builder:
W.R. Menchions
Location:
Alaska

TE18-007

79'x26'x9.5' wood Canadian seiner, currently rigged as tender, and built by Menchions Shipyard in 1942. GMC 12V71 rated at 425 hp. Twin Disc reduction gear w/ 4.5:1 ratio. CAT 3304 w/ 40 kW genset. 1,800 gallon fuel capacity in (2) tanks. Packs 130,000# in (4) insu...

More Details

Sign up for email updates