SP23-002

$175,000
Year:
1978
Length:
41
Hull:
Aluminum
Builder:
Sea Venture
Location:
Alaska

SP23-002

41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...

More Details

SP23-001

$85,000
Year:
1967
Length:
34
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP23-001

34’x11.5’ fiberglass sternpicker built by Roberts in 1967. Perkins 6-cylinder main engine rated at 250 hp. Twin Disc MG-507 with 1.97:1 ratio. 2000 watt Honda generator. 400 gallons fuel capacity in (2) tanks. Dickinson stove, marine head. Kolstrand reel and power...

More Details

SP22-005

$165,000
Year:
1978
Length:
45
Hull:
Fiberglass
Builder:
Marine MGMT Corp
Location:
Alaska

SP22-005

45’x14’ fiberglass, sternpicker, built by Marine MGMT Corp in 1978. Lugger 6125A rated 425 hp w/ Twin Disc 5111A gear. Northern Lights 9kW genset w/ wet exhaust. Alaska Hydraulics 22 gpm hydraulic pump off main. Aluminum mast, boom and stabilizer poles. Sliding Kin...

More Details

SP22-004

$30,000
Year:
1941
Length:
38
Hull:
Wood
Builder:
KN
Location:
Alaska

SP22-004

38’x10’ wood sternpicker and troller built in 1941 by KN, fir on oak, new planking throughout. GMC 453 main engine rated at 100 hp. Capitol gear. Makes 6.5 knots at 1.5 gph. 350 gallons fuel capacity in (4) tanks. Packs 11k# in (7) insulated holds, slush ice. Propa...

More Details

SP22-003

$225,000
Year:
1990
Length:
42
Hull:
Aluminum
Builder:
La Conner Boat Works
Location:
Alaska

SP22-003

42’x14’ aluminum gillnetter built in 1990 by La Conner Boat Works. John Deere 6125TA main engine rated at 525 hp, 4500 hours. ZF IRM 320PL gear. Packs 20k# in (2) insulated fish hold. 600 gallons fuel capacity in (2) tanks, 50 gallons fresh water capacity. Deck equi...

More Details

CR22-008

$55,000
Year:
1969
Length:
33
Hull:
Fiberglass
Builder:
Roberts
Location:
Washington

CR22-008

33’x11.5’ fiberglass crabber/gillnetter built by Roberts in 1969. Yanmar 6-LY main engine rated at 300 hp. New ZF gear and bowthruster. Makes 10 knots. 200 gallons fuel capacity. Packs 6k# in brailers. Deck equipment includes Kinematics gillnet drum, hydraulic dav...

More Details

CR22-005

$375,000
Year:
1968
Length:
36
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

CR22-005

36’x11’x5’ aluminum Shore built in 1968, INCLUDING CA 400 pot crab permit good to 69’10” mloa. Crusader 454 main rated at 350 hp, w/ less than 500 hours. Insulated fish hold packs 16,000 lbs. Deck equipment includes net reel and power roller. Electronics include GPS...

More Details

SP22-001

$320,000
Year:
1989
Length:
40
Hull:
Fiberglass
Builder:
Lindell
Location:
Alaska

SP22-001

40’x14’ fiberglass sternpicker set up to crab and gillnet. Built by Lindell in 1989. Komatsu by Lugger main, rated at 440 hp w/ Twin Disc 509 gear. Northern Lights Lugger M673L3.3 w/ 7.5 kW genset. IMS RSW system. Packs 18k lbs in (6) insulated fish holds. Sliding...

More Details

CR22-002

$270,000
Year:
1990
Length:
45
Hull:
Fiberglass
Builder:
Lindell
Location:
Alaska

CR22-002

45’x13’ fiberglass crabber/gillnetter built in 1990 by Lindell. GMC 8V92 main engine rated at 300 hp. Twin Disc gear with 2:1 ratio. Northern Lights 6 kW gen set, 100 hours. 600 gallons fuel capacity in (2) tanks. Packs 20k# in (3) insulated fish holds. Bow thrust...

More Details

DV22-002

$150,000
Year:
1988
Length:
32
Hull:
Aluminum
Builder:
Alucraft
Location:
Alaska

DV22-002

32’x12’x3.5’ aluminum sternpicker built in 1988 by Alucraft. Currently configured for dive fisheries. Detroit V692 main engine rated at 275 hp. Twin Disc 509 gear. Makes 10 knots. (3) tanked fish holds, full dive set-up. Marine head w/shower. Electronics include...

More Details

SP20-006

$99,000
Year:
1984
Length:
32
Hull:
Fiberglass
Builder:
Daniels Marine
Location:
SE Alaska

SP20-006

32’x12.7’x5.8’ fiberglass sternpicker built by Daniels Marine in 1984. CAT 3208 main rated at 320 hp w/ Twin Disc 506 gear. 20 gpm Vickers hydraulic pump w/ electric clutch. Packs up to 12,000 lbs in (3) insulated fish holds. Deck equipment includes reel, power roll...

More Details

SP21-007

$90,000
Year:
1979
Length:
38
Hull:
Fiberglass
Builder:
Marbin
Location:
Alaska

SP21-007

38’x12’x5’ fiberglass gillnetter built by Marbin in 1979. Deere 6068TFM75 main engine rated at 200 hp. Twin Disc gear with 2:1 ratio. Troll valve on reduction gear. Makes 7 knots at (3) GPH. 400 gallons fuel capacity. Packs 8k# in (7) insulated fish holds. Electr...

More Details

TR21-012

$125,000
Year:
1983
Length:
47
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

TR21-012

47’x14’x8.5’ fiberglass combination vessel rigged for gillnet, crab, salmon, and longline. Delta laid hull finished by private party in 1983. Detroit 671 main rated at 200 hp, w/ only 750 hours on rebuild. Twin Disc 509 gear. 10kw Isuzu genset. Packs 15,000 lbs cr...

More Details

SP21-005

$80,000
Year:
1976
Length:
41
Hull:
Fiberglass
Builder:
Deltaga Boat Works
Location:
British Columbia

SP21-005

41’x11.5’ fiberglass gillnetter built in 1976 by Deltaga Boat Works in BC. Mitsubishi main engine rated at 270 hp. Twin Disc 509 gear with 2.48:1 ratio. 600 gallons fuel capacity. Makes 9 knots. Packs 20k# in insulated fish holds. Freezer system with Dunham-Bush co...

More Details

SP21-003

$344,000
Year:
1981
Length:
44
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP21-003

44’x14’ fiberglass gillnetter/longliner built in 1981 by Roberts. Volvo TMDA122 main engine rated at 350 hp. Twin Disc MG 514 gear with 1.5:1 ratio. Cruises at 8 knots, makes 10 knots. 800 gallons fuel capacity. Stamford 20 kW generator. Packs 20k# in (15) insulat...

More Details

SP20-003

$95,000
Year:
1976
Length:
37
Hull:
Fiberglass
Builder:
Ferrell
Location:
Alaska

SP20-003

37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...

More Details

SP19-014

$75,000
Year:
1977
Length:
36
Hull:
Fiberglass
Builder:
Okabi
Location:
Alaska

SP19-014

36’x11’x4’ fiberglass sternpicker/dive boat built by Okabi Boat Work, in B.C., in 1977. Cummins 6BTA 5.9L rated at 210 hp. Borge Warner Velvet drive reduction gear. Rebuilt deck, cabin, and fish holds. (3) Insulated fish holds pack 10k lbs. Kem gear net reel, power...

More Details

SP19-013

$135,000
Year:
1987
Length:
36
Hull:
Fiberglass
Builder:
Frostad
Location:
British Columbia

SP19-013

36’x12.5’x7’ fiberglass gillnetter built by Frostad in 1987. Canadian vessel, no ad-measurement, but only 6 net tons. Volvo MD71 main rated at 357 hp, w/ Twin Disc 507 gear. Fuel capacity of 400 gallons in (4) tanks. Packs approx. 12,000# in (4) tanked/insulated hol...

More Details

SP19-011

$80,000
Year:
1983
Length:
38
Hull:
Fiberglass
Builder:
Kachemak Marine
Location:
Alaska

SP19-011

38’x11.2’x6.9’ fiberglass sternpicker built by Kachemak Marine in 1983. Cat 3208TA rated at 425 hp w/ rebuilt Twin Disc 507 gear. Packs 20k lbs in (4) updated and insulated fish holds. Kem Marine sliding reel, Kinematic levelwind and stern roller. Vickers single st...

More Details

TR19-042

$85,000
Year:
1973
Length:
36
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

TR19-042

36’x11’x4’ fiberglass troller built in 1973 by Roberts in La Conner, WA. John Deere 6068 main engine rated at 210 hp. Twin Disc 506 gear. Makes 7.5 knots. 300 gallons fuel capacity in (2) tanks. Packs appx 3,500# in (2) holds. Recently reconditioned Kolstrand 3-sp...

More Details

UT19-005

$45,000
Year:
1986/2013
Length:
40
Hull:
Fiberglass
Builder:
Snoball
Location:
California

UT19-005

40’x12’x5’ fiberglass vessel, Snowball hull built in 1986, finished in 2013. Currently rigged as sanitation vessel to pump holding tanks, but ready to be rigged for fishing. Detroit 310 hp 8v71 main w/ 450 ORIGINAL hours, and “crash box” gear. Hydraulic steering, and...

More Details

CO19-009

$75,000
Year:
1975
Length:
35
Hull:
Aluminum
Builder:
Alumacraft
Location:
British Columbia

CO19-009

35'x10.5'x3' aluminum combination vessel built by Alumacraft in 1975. GMC 653 main rated at 160 hp. Twin Disc 506 gear with 2.5:1 ratio. Packs 11,000# in insulated fish holds. Deck equipment includes crab hauler, crab block, line hauler, and gillnet drum with drum d...

More Details

SP19-002

$145,000
Year:
1970
Length:
39.5
Hull:
Fiberglass
Builder:
Westport
Location:
Alaska

SP19-002

39.5’x12.5’x3.7’ fiberglass sternpicker/troller built by Westport in 1970. Recently installed factory remanufactured Cat 3208NA rated at 215 hp w/ replaceable sleeves and triple ringed pistions. Twin Disc 506 reduction gear w/ 3:1 ratio. Stretch and flush deck work b...

More Details

SP19-001

$18,000
Year:
1969
Length:
30
Hull:
Fiberglass
Builder:
Blix
Location:
Oregon

SP19-001

30'x10'x3' fiberglass Columbia River gillnetter, built by Blix in 1969. Perkins diesel main rated at 120 hp, w/ Velvet Drive gear. Cruises at 9 knots w/ excellent fuel consumption. 7.5 Vickers hydraulic pump w/ electric clutch. Packs 4,200# salmon in one fish hold....

More Details

SP18-025

$135,000
Year:
1985
Length:
38
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP18-025

38'x12'x4' fiberglass sternpicker/dive built by Roberts in 1985. Cat 3126 rated at 350 hp w/ Twin Disc MG507 gear. 300 ftm net reel w/ levelwind and power roller. (7) fish holds pack 15k lbs salmon. Includes dive ladder, cuke/geoduck table, LL drum, ground line w/...

More Details

SP18-023

$65,000
Year:
1970
Length:
36
Hull:
Fiberglass
Builder:
Albion
Location:
Alaska

SP18-023

36'x10.5'x4' fiberglass sternpicker, built by Albion in 1970. Volvo MD-70A rated at 140 hp. Capitol 2HEA reduction gear. 12 gpm hydraulic pump on Pitts clutch. Packs 10,000 in (7) holds setup for slush bags. KEM hydraulic drum and McElroy 40" hydraulic stern roller...

More Details

SP18-019

$30,000
Year:
1959
Length:
32
Hull:
Aluminum
Builder:
Marco
Location:
Alaska

SP18-019

32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics i...

More Details

SP18-013

$69,000
Year:
1969
Length:
38
Hull:
Fiberglass
Builder:
Unknown
Location:
Alaska

SP18-013

38’x12.5’ sternpicker, fiberglass over wood, built 1969. Rigged for gillnet and shrimp pot fishing. 250 hp Cummins 6BTA, appr. 15,000 hrs. Makes 8 knots. Northern Lights gen set. 7.5 ton IMS hydraulic RSW system. Packs 20k# in (5) insulated fish holds. Gillnet dr...

More Details

SP17-012

$60,000
Year:
1974
Length:
40
Hull:
Fiberglass
Builder:
Mel Martin
Location:
Alaska

SP17-012

40’x11.7’ fiberglass flush deck sternpicker built as a 36’ by Mel Martin, then extended to 40’. Cummins 6BTA rated at 250 hp. Twin Disc MG506 gear w/ 2.5:1 ratio. (6) fish holds. Hydraulic reel, level wind and Marco power roller. Aluminum outriggers w/ SS cable. 2...

More Details

SP14-006

$90,000
Year:
1979
Length:
34
Hull:
Aluminum
Builder:
Carlson Enterprises
Location:
Alaska

SP14-006

34'x12'x2.5' aluminum sternpicker built in 1979 by Carlson Enterprises. Twin Volvo Penta gas mains rated at 300 hp each. Volvo Penta SX DP outdrives. 25 knot cruise. 300 gallons fuel capacity. 12,000# fish hold capacity in (4) separate fish holds. Aluminum reel wit...

More Details

Sign up for email updates