LL21-005

$1,600,000
Year:
1944
Length:
180
Hull:
Steel
Builder:
Higgens
Location:
Washington

LL21-005

180’x32’x15’, twin-screw freezer longliner built in 1944 by Higgins Industres Inc. Originally built to ABS requirements for US Military and maintained to loadline specifications. Converted to a freezer/longliner in 1991 by Foss Shipyard. Twin Caterpillar 3412 main engi...

More Details

CR21-029

$80,000
Year:
1973
Length:
47
Hull:
Steel
Builder:
Spangler
Location:
California

CR21-029

47’x14’ steel crabber/troller built by Spangler in 1973. GMC 671 main engine rated at 200 hp. Makes 7.5 knots. Twin Disc 509 gear with 3:1 ratio. Isuzu 240 aux drives 25 gallon hydraulic pump. Packs 24k# crab in insert. Deck equipment includes Junes cab block and...

More Details

CR21-028

$600,000
Year:
1952
Length:
52
Hull:
Wood
Location:
Oregon

CR21-028

52’x16’ wood crabber/troller built in 1952. Heavily constructed, sawn timbers, 6” thick hull. Cummins 855 main engine rated at 300 hp. Makes 7 knots. 1500 gallons fuel capacity in (4) tanks. 20 kW Isuzu genset. Packs 25k# crab in (1) insulated, tanked hold. Spray...

More Details

SE21-011

$550,000
Year:
1979
Length:
48
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SE21-011

48’x14x5’ fiberglass seiner/crabber built in 1979 by Delta. Volvo TAMD 120A main engine rated at 290 hp. Twin Disc MG509 gear with trolling valve. Makes 8 knots. 800 gallons fuel capacity in (2) tanks. 30 kW MER gen set. Packs 30k# in RSW, (1) fish hold. 20 ton I...

More Details

BB21-048

$235,000
Year:
1994
Length:
32
Hull:
Aluminum
Builder:
Kvichak
Location:
Alaska

BB21-048

32’x12.3’ aluminum, RSW, flush deck, gillnetter, built by Kvichak in 1994. Recently installed Lugger 6108 rated at 300 hp and Twin Disc 506 gear both w/ low hours. IMS 7.5 ton RSW. 6 and 4 cube direct drive hydraulic pumps. (5) insulated fish holds pack 11k lbs comp...

More Details

SE21-010

$1,000,000
Year:
1977
Length:
58
Hull:
Fiberglass
Builder:
Kettenberg Marine
Location:
Alaska

SE21-010

57’x20’x7.5’ fiberglass seiner/combination vessel built in 1977 by Kettenberg Marine in Point Loma, CA. Cat 3406 main engine rated at 425 hp. Twin Disc MG5114 gear with 4.17:1 ratio. Isuzu 60kW and 40kW gen sets. 3,700 gallons fuel capacity. Packs 100k# in (4) fish...

More Details

CR21-027

$1,700,000
Year:
1980
Length:
125
Hull:
Steel
Builder:
Nichols Brothers Boat
Location:
Washington

CR21-027

125’x30’ steel vessel built by Nichols Brothers in 1980. Currently in service as a crab, pot-cod, and tender vessel. Caterpillar D399 main engine rated at 1,125 hp. Caterpillar 7261 reduction gear with 4.27:1 ratio. Makes 10 knots. 44k gallons fuel capacity. (2)...

More Details

BB21-050

$105,000
Year:
1980
Length:
32
Hull:
Fiberglass
Builder:
Glass Fab
Location:
Alaska

BB21-050

32’x11’x5.5’ fiberglass flush deck, RSW, Bristol Bay gillnetter, built by Glass Fab in 1980. Volvo TAMD70 main rated at 285 hp. IMS 5.5-ton RSW system. Packs 8,000 lbs in (8) fish holds. Maritime Fab stern roller, aluminum drum w/ Kinematic Twister drive, and lots of...

More Details

TE21-006

$250,000
Year:
1944
Length:
70
Hull:
Wood
Builder:
Kirkland Marine
Location:
Alaska

TE21-006

70’x19’ wooden tender built by Kirkland Marine in 1944. Cat D-343 rated at 335 hp w/ 5.16:1 ratio reduction gear. Craig Taylor 55 kW getset. Packs 100k lbs in fiberglass fish hold w/ RSW. New stern bearing, roof, oil tank and 32V constavolt. New planks, ribs and co...

More Details

CR21-026

$300,000
Year:
1966
Length:
36
Hull:
Aluminum
Builder:
Matsumoto
Location:
Oregon

CR21-026

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Rebuilt Cummins 6BTA rated at 315 hp w/ 2k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold. Hydraulic davit, 15” Junes block and bins for crab tank. Vickers 24 GPM hydraulic...

More Details

TR21-020

$39,000
Year:
1965
Length:
41
Hull:
Wood
Builder:
Disney
Location:
Alaska

TR21-020

41’x12.5’ wood troller built in 1965 by Disney, B.C. Canada, refitted with extended salon/galley. Gardner 6KLB main rated at 127 hp, w/ Capitol reduction gear. Northern Lights 6kw genset. 600 gal fuel capacity in (2) tanks. Deck equipment includes 5” aluminum mast,...

More Details

SP21-007

$90,000
Year:
1979
Length:
38
Hull:
Fiberglass
Builder:
Marbin
Location:
Alaska

SP21-007

38’x12’x5’ fiberglass gillnetter built by Marbin in 1979. Deere 6068TFM75 main engine rated at 200 hp. Twin Disc gear with 2:1 ratio. Troll valve on reduction gear. Makes 7 knots at (3) GPH. 400 gallons fuel capacity. Packs 8k# in (7) insulated fish holds. Electr...

More Details

CR21-025

$100,000
Year:
1965
Length:
36
Hull:
Aluminum
Builder:
Matsumoto
Location:
Oregon

CR21-025

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Recently upgraded Cummins 6BTA rated at 315 hp w/ 1k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold w/ insert. Hydraulic davit, 17” Junes block and dump box. Vickers 24...

More Details

TR21-019

$45,000
Year:
1980
Length:
35
Hull:
Fiberglass
Builder:
Farrell
Location:
Alaska

TR21-019

35’x10’x4’ fiberglass troller buit by Farrell in 1980. Cummins 4BT main engine rated at 140 hp. ZF gear with 2.5:1 ratio. 450 gallons fuel capacity in (2) tanks. 90 gallons fresh water capacity. Marine head, stove, and sink. Deck equipment includes Kolstrand haule...

More Details

CR21-021

$110,000
Year:
1978
Length:
30
Hull:
Fiberglass
Builder:
Wilson
Location:
California

CR21-021

30’x10’x3’ fiberglass Wilson built in 1978, rigged for nearshore and longline. Cummins QSL 8.9 main rated at 405 hp w/ 5,300 hours. ZF 280 V-Drive w/ 1.56:1 ratio. Fish hold capacity of 2,500 lbs + 1,000 lbs ice. Deck equipment includes 15” Warren Junes hauler, (2)...

More Details

TR21-017

$105,000
Year:
1991
Length:
26
Hull:
Fiberglass
Builder:
Radon
Location:
California

TR21-017

26’x8.5’x2’ fiberglass Radon built in 1991, rigged as dive boat and troller. Yanmar 6LPA STZ main rated at 315 hp w/ 2,090 hours. Mercruiser X outdrive w/ only 150 hrs. 250 gallon fuel tank. Does 20-23 kts WOT. Packs 1,000 lbs below deck. Includes recently rebuilt...

More Details

BB21-051

$325,000
Year:
2006
Length:
32
Hull:
Aluminum
Builder:
Alfa/Edling
Location:
Alaska

BB21-051

32’x14.5’x36” aluminum, Bristol Bay gilletter hull built by Alfa and finished by Edling in 2006. Recently added top house. John Deere 6125 rated at 529 hp w/ ZF325 gear. Key Power 10” bow thruster. IMS 7.5 ton, gen. 2, RSW system w/ upgraded motor and adapter plate....

More Details

TR21-018

$100,000
Year:
1952
Length:
40
Hull:
Wood
Builder:
Triple & Everett
Location:
California

TR21-018

40’x12’x6’ wood troller built in 1952 by Triple & Everett. GMC 371 main engine rated at 110 hp. Twin Disc 5061 gear. Makes 7 knots. 500 gallons fuel capacity in (2) new stainless tanks. Packs 10k# salmon in (1) fish hold. New hatch, recailk, and refastening done i...

More Details

CR20-024

$1,600,000
Year:
1992
Length:
85
Hull:
Steel
Builder:
Rodriguez
Location:
Washington

CR20-024

85’x22’x12’ steel fishing vessel built in 1992 by Rodriguez. Currently set up as a crabber/shrimper. Refit at Giddings in 2016, including bulbous bow and new main. Cummins QSJ19 main engine rated at 660 hp. Twin Disc MGX-5222 gear with 5:1 ratio. Makes 9 knots. 9k...

More Details

BP21-006

$52,000
Length:
26
Hull:
Aluminum
Builder:
Schrib
Location:
Washington

BP21-006

26’x9’x18” aluminum bowpicker set up to crab and gillnet, built by Schrib. Volvo rated at 220 hp w/ approx. 1100 hours. Makes 10 knots. (3) fuel tanks w/ 120 gallons combined capacity. Single fish hold packs 5k lbs. Aluminum drum w/ levelwind, 10” crab block w/ ram...

More Details

BB21-047

$85,000
Year:
1977
Length:
32
Hull:
Fiberglass
Builder:
Wegley
Location:
Alaska

BB21-047

32’x10.7’x2’ fiberglass, Bristol Bay gillnetter built by Wegley in 1977. Makes 19 knots WOT. Recent improvements include deck, fish holds, engine, LED lights, new wiring, railings and more. Cummins 6BTA rated at 315 hp w/ 760 hrs and ZF 286A gear. (10) individual, Ni...

More Details

CR21-022

$270,000
Year:
2008
Length:
28
Hull:
Aluminum
Builder:
Northriver
Location:
California

CR21-022

28’x9.5x3’ aluminum Northriver built in 2008, rigged for crab and salmon, including permits. 2008 triple axle galvanized Ezload trailer. Twin Yamaha 250 hp outboards w/ 2,000 hrs. Does 40 kts WOT. Honda 240 power pack for hydraulics. Deck equipment includes 12” Jun...

More Details

BB21-046

$200,000
Year:
1979
Length:
32
Hull:
Aluminum
Builder:
Hydra Electric
Location:
Alaska

BB21-046

32’x14.5’x36” aluminum, RSW, flush deck, Bristol Bay gillnetter build by Hydra Electric in 1979. Rebuilt Detroit 6V92 rated at 550 hp w/ Twin Disc 509 gear. New 10” bow thruster. Packs 17k lbs in (5) insulated fish holds. IMS 8.5 ton RSW new in 2018. 6 cu and 2.9 c...

More Details

BB21-045

$210,000
Year:
1988
Length:
32
Hull:
Fiberglass
Builder:
Wegley
Location:
Alaska

BB21-045

32’x13’ fiberglass, flush deck, RSW, jumbo Wegley built in 1988. Cat 3208 rated at 320 hp w/ Twin Disc gear. New IMS 7.5 ton RSW. Packs 12k lbs in (10) insulated fish holds. Custom Fab drum, Kinematic Twister drive, levelwind and stern roller. Electronics include V...

More Details

SK21-007

$69,000
Year:
2012
Length:
18
Hull:
Aluminum
Builder:
Tyler Boat
Location:
Washington

SK21-007

18’x10’ aluminum seine skiff built by Tyler Boat in 2012. Cummins 6BT rated at 210 hp. Twin Disc 5050 reduction gear with 3:1 ratio. (2) fuel tanks with 100 gallons total capacity. Located in WA. Asking $69,000.00

More Details

SP15-006

$295,000
Year:
1978
Length:
44
Hull:
Fiberglass
Builder:
Seahorse
Location:
Alaska

SP15-006

44’x12’ fiberglass gillnetter, built by Seahorse. Original construction in 1978 and complete rebuild in 2015. Deck, fishhold, tanks, and house aft bulkhead removed and refabricated. New deck gear, shaft and steering ram. John Deere 6068 rated at 205 hp w/ Twin Disc...

More Details

CR21-018

$220,000
Year:
2014
Length:
38
Hull:
Aluminum
Builder:
Lyska
Location:
California

CR21-018

38’x12.75’x4’ custom aluminum lobster boat, built by Lyska in 2014. Volvo Penta D11 main rated at 510 hp, w/ only 2,700 hours. ZF325 reduction gear. Fuel capacity of 500 gallons in (2) tanks. Big back deck well rigged for lobster, hydraulic hauler at steering statio...

More Details

TE21-005

$1,200,000
Year:
1978
Length:
107
Hull:
Steel
Builder:
Sundial Marine
Location:
Washington

TE21-005

107’x26’x8.4’ steel crabber/tender. Jensen design, built in 1978 by Sundial Marine. Twin 360 hp 3408 CAT mains w/ Twin Disc 514 gears. (2) Cat 3306 125kw and Mitsubishi 30kw gensets. Fuel capacity of 22,000 gal in (8) tanks. (2) IMS 30-ton RSW systems. Packs 260,0...

More Details

TR21-016

$50,000
Year:
1980
Length:
31
Hull:
Wood
Builder:
Steve Phillips
Location:
Oregon

TR21-016

31’x11’x4’ wooden troller set up to crab and troll, built by Steve Phillips in 1980. John Deere 6068 TFM installed in 2001 and upper end rebuilt in 2017. Twin Disc 5061A reduction gear. Vickers 24 gallon hydraulic pump off main w/ Pitts clutch. (2) 3 spool Kolstrand...

More Details

CR21-020

$120,000
Year:
1944
Length:
40
Hull:
Wood
Builder:
August E. Hansen
Location:
Washington

CR21-020

40’x11.7’x5.8 wood vessel rigged for crab, troll, longline, and built by August E. Hansen in 1944. Detroit 4-71 main rated at 130 hp, w/ Allison M-6 gear. Perkins 20kw genset. Spray Brine RSW system w/ Blitzer 8-ton compressor and titanium chiller. Packs 10,000# cra...

More Details

Sign up for email updates