- Year:
- 2006
- Length:
- 40
- Hull:
- Aluminum
- Builder:
- Curry
- Location:
- Washington
40’x13.5’x6’ newer aluminum crabber built by Curry in 2006. Twin 350 hp Volvo D6 mains w/ Volvo DPH outdrives, and only 4,000 hrs. Cruises at 20 kts and does 32 kts WOT. Westerbeke 7.6kw genset. Fuel capacity of 500 gallons in (3) tanks. (4) fish holds pack 1,500 l...
More Details- Year:
- 1917
- Length:
- 56
- Hull:
- Wood
- Builder:
- Barbare Bros.
- Location:
- Alaska
56’x14.7’x6.1’ wood seiner built by Babare Bros in 1917, with extensive rebuilds and aluminum tophouse. 375 hp John Deere 6081 w/ Twin Disc 514 gear. 27kw Isuzu MER genset, new in 2012. (2) Vickers 60/40 and 40 run off Twin Disc PTO. Packs 50,000 lbs in tanked & ins...
More Details- Year:
- 1981
- Length:
- 56
- Hull:
- Steel
- Location:
- Washington
56’x16’x7’ steel purse seiner, Monk design, built in 1982. Detroit 871 rated at 350 hp w/ 4850 hrs on the rebuild. Perkins auxiliary runs hydraulic RSW system. Packs 75k lbs in (2) insulated fish holds. RSW w/ 18 ton compressor. Marco power block w/ gripper, deck w...
More Details- Year:
- 1945
- Length:
- 110
- Hull:
- Steel
- Location:
- Alaska
110’x34’x12’ steel ex-US Navy YFN Class, flat deck cargo barge built in 1945. Hull is divided by five transverse watertight bulkheads dividing the hull into six watertight compartments, all w/ deck hatches port and starboard. Survey available. Asking $150,000.
More Details- Year:
- 1943
- Length:
- 120
- Hull:
- Steel
- Location:
- Alaska
120’x33’x10’ steel oil class flat deck cargo barge built in 1943. Stern has empty steel pump room. Topside is a flat cargo deck with slight rise fore and aft. Survey available. Asking $125,000.
More Details- Year:
- 1944
- Length:
- 150
- Hull:
- Steel
- Location:
- Alaska
150’x33’x10.5’ steel non self-propelled flat deck general cargo barge, built in Stockton, California in 1944. Fitted with 4” concrete flat cargo deck w/ 1” steel lashing rails on either side. Previously held COI and loadline certification, both expired. Survey availab...
More Details- Year:
- 2016
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Strongback
- Location:
- Alaska
32’x14.5’x1.5’ aluminum Bristol Bay jet boat built in 2016 by Strongback. John Deere 6090 main engine rated at 550 hp. ZF gear and 18” Hill Hi431 jet. Makes 21 knots light, 14 w/water. 8” bow thruster. (2) Eaton 4 cu pumps. Packs 10k# in (8) fish holds. IMS 7.5 to...
More Details- Year:
- 1979
- Length:
- 66
- Hull:
- Steel
- Builder:
- Howard Maki
- Location:
- Alaska
66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. (2) new John Deere 4045 65kw gensets installed 2023. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 20-ton RSW s...
More Details- Year:
- 2018
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- LaConner
- Location:
- Alaska
39’x14’x5.5’ LaConner fiberglass sternpicker/crabber built in 2018. Volvo Penta D13 main engine rated at 600 hp. Twin Disc MGX5126A gear with 2.5:1 ratio. Makes 10 knots. 8” bow thruster. Packs 17k# salmon in (7) insulated holds. IMS 5 ton RSW system. Deck equipm...
More Details- Year:
- 1970
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- Rohd
- Location:
- California
39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furuno radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California...
More Details- Year:
- 1969
- Length:
- 104
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...
More Details- Year:
- 1965
- Length:
- 48
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Oregon
48’x14’x5.5’ fiberglass crabber built by Rawson in 1965. John Deere 6090 main rated at 425 hp w/ 5,250 hours. Twin Disc 511 gear. Lugger w/ 7.5kw Northern Lights genset. Fuel capacity of 600 gallons in (3) tanks. Fish hold packs 6,200, and is tanked/insulated. Dec...
More Details- Year:
- 1979
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Formosa
- Location:
- California
40’x14’x3.5’ fiberglass troller also rigged for black cod, built in 1979 by Formosa Boat Building. 160 hp Perkins main w/ Twin Disc 373 gear. Lugger w/ 20 kw Northern Lights genset. Fish hold packs 8,000 lbs. Deck equipment includes set of 3-spool gurdies, longline...
More Details- Year:
- 1975
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Alaska
45’x13.5x9.5’ fiberglass Sunnfjord freezer-troller built in 1975, also rigged for longline and spot prawns. John Deere 6068 main rated at 225 hp w/ Twin Disc 506 gear. Isuzu 30kw genset. Fuel capacity of 1,250 gallons in (4) tanks. Fish hold packs 8,000 lbs frozen p...
More Details- Year:
- 2016
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Provincial Boat and Marine
- Location:
- California
45’x14’x4’10” fiberglass light boat built by Provincial Boat and Marine in 2016. Scania DA6 main rated at 550 hp w/ 5,000 hrs. ZF 360 gear. New Northern Lights 30kw genset w/ only 50 hrs. Packs 10,000 lbs in (3) tanked/insulated fish holds w/ RSW. SeaKeeper5 stabil...
More Details- Year:
- 1979
- Length:
- 34
- Hull:
- Fiberglass
- Builder:
- Marben
- Location:
- Alaska
36’x11.5’x6.5’ fiberglass sternpicker built by Marben in 1979. John Deere main engine rated at 200 hp. 400 gallons fuel capacity. Packs 10k# in (3) insulated fish holds. IMS 7.5 ton RSW system. Deck equipment includes Kolstrand reel w/levelwind and power roller. E...
More Details- Year:
- 1992
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Wegley
- Location:
- Alaska
32’x13’ fiberglass Jumbo Wegley built in 1992. Detroit 6V92TA main engine rated at 475 hp. Twin Disc MG509 gear with 1.95:1 ratio. Makes 10 knots. Bow thruster, new in 2019. Packs 14k# in (9) newly-insulated fish holds. IMS 8.5 ton RSW, diesel drive with Isuzu 3 k...
More Details- Year:
- 1982
- Length:
- 56
- Hull:
- Steel
- Builder:
- TD Fabricators
- Location:
- Washington
56’x19’x9.5’ steel seiner/combination vessel built by TD Fabricators in 1982, completely gone through in 2023. Cummins NT855 main engine rated at 250 hp. ZF gear with 4.5:1 ratio. 65 kW John Deere 4045 and 20 kW Isuzu 4B gensets. Packs 100k# in (3) fish holds. 18 ton...
More Details- Year:
- 1983
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x11.5’x2.5’ aluminum Bristol Bay boat built in 1983 by Shore. Volvo TAMD 63L main engine rated at 320 hp. Makes 10 knots. Burns 2-3 gph. Packs 12k# in (8) fish holds, (4) insulated. 3 ton Sea Cool RSW system. Berths for (4) Kinematics drum and power roller. Ele...
More Details- Year:
- 1999
- Length:
- 85
- Hull:
- Steel
- Builder:
- Fred Wahl
- Location:
- Oregon
85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....
More Details- Year:
- 1979
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Bruno and Stillman
- Location:
- Alaska
42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...
More Details- Year:
- 1963
- Length:
- 57
- Hull:
- Wood
- Builder:
- Iver Wilson
- Location:
- California
57’x15.5’x7.5’ wood combination vessel/permit package, rigged for crab, shrimp, trawl, and albacore. Built by Iver Wilson in 1963. Cummins 6-cyl 250hp main w/ Twin Disc 509 gear. 40kw Kubota genset, new in 2016. 1,200 gallon fuel capacity in (4) tanks. Complete dec...
More Details- Year:
- 2011
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All Points
- Location:
- Alaska
32’x15’x3’ aluminum, RSW, flush deck, Bristol Bay boat built by All Points in 2011. Scania DI 1266M rated at 650 hp w/ ZF 360A gear. Bow thruster. Mitibushi diesel drive IMS 10 ton RSW system. Packs 23k lbs in (8) double walled, insulated fish holds. Custom narrow...
More Details- Year:
- 2016
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Maverik Marine
- Location:
- Alaska
32’x16’8” aluminum, Bristol Bay jet boat built by Mavrik Marine in 2016. CAT C18 ACERT rated at 1000 hp w/ ZF550 gear. Hamilton HM 521 water jet. Makes 34 kts light and 8 kts cruise. Isuzu diesel drive 10 ton IMS RSW w/ 3.7 kW generator. Chills 20k lbs in (8) doubl...
More Details- Year:
- 1970
- Length:
- 29
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Alaska
29’x10.5’x2.5’ fiberglass Bristol Bay boat built in 1970 by Rawson. Cummins 6BTA main engine rated at 260 hp. ZF220 gear. Makes 7.5 knots at 1.5 gph. Packs 6,500# in (9) insulated fish holds. IMS 7.5 ton hydraulic drive RSW, rebuilt in 2021. (2) Eaton 3.8 cu pumps...
More Details- Year:
- 1988
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Curry
- Location:
- Alaska
32’x14’x31” aluminum, RSW, Bristol Bay gillnetter built by Curry in 1988. Detroit 6V92 rated at 465 hp w/ approx 2500 hrs on the rebuild. Twin Disc 509 gear. 10” bow thruster. Packs 14k lbs in (7) insulated fish holds. Shipped to Maritime Fab. in 2017 to replace fi...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Bannon/Alfa
- Location:
- Alaska
32’x12.7’x3’ aluminum Bristol Bay boat built by Bannon in 1980 and completely rebuilt by ALFA in 2014. Cat 3196 main engine rated at 660 hp w/ approx 2700 hrs on rebuild. Twin Disc 6114 reduction gear. Makes 18 knots. Packs 12k lbs in (8) insulated fish holds. Rebu...
More Details- Year:
- 1985
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Alaska
32’x13’x3’ jumbo Rawson, flush deck, RSW, Bristol Bay gillnetter built in 1985. Caterpillar 3208 main engine rated at 325 hp. Makes 12 knots. Packs 10k# in (9) fish holds, (5) insulated. 7.5 ton Pac West chill-down system. Deck equipment includes Kinematics drum w/...
More Details- Year:
- 1955
- Length:
- 95
- Hull:
- Steel
- Builder:
- USCG
- Location:
- California
95’x19’x6.5’ steel Coast Guard vessel, currently used for training and educational purposes. Originally built for the USCG in 1955. Twin screw with propulsion from (2) Cummins VT12 main engines rated at 550 hp. (1) additional Cummins VT12 backup main engine. Capitol g...
More Details- Year:
- 1993
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Peregrine
- Location:
- Alaska
32’x15.5’x22” aluminum, triple jet, Bristol Bay boat built by Peregrine in 1993. (2) rebuilt, keel cooled, Volvo 72WJ each rated at 450 hp w/ rebuilt DOEN 130 jets and ZF 301 gears. Center mount, raw water cooled, Volvo TAMD 63P rated at 370 hp w/ Hamilton 291 jet. Spl...
More Details