- Year:
- 1966
- Length:
- 44
- Hull:
- Steel
- Location:
- Oregon
44.9’x14’x7.8’ steel combination vessel rigged for crab, salmon, tuna, black cod, and built in 1966. Detroit 671 main rated at 210 hp, rebuilt in 2021. Twin Disc 509 reduction gear. Isuzu 21kw genset. Fish hold insert packs 8,500 lbs crab. Blast freeze system w/ 10...
More Details- Year:
- 1977
- Length:
- 63
- Hull:
- Steel
- Builder:
- Mackey Marine
- Location:
- Alaska
63.6’x16.5’x8’ steel, tender/crabber, built by Mackey Marine in 1977. Vessel has been gone through and rebuilt. Cummins 855 main rated at 375 hp w/ low hours. ZF350 reduction gear. isuzu 50 kW and Klassen 20 kW gensets, both w/ low hours. Custom 30-ton RSW w/ stain...
More Details- Year:
- 1974
- Length:
- 46
- Hull:
- Fiberglass
- Builder:
- Little Hoquiam Boatworks
- Location:
- Washington
46’x13.2’ fiberglass freezer troller built by Little Hoquiam Boatworks in 1974. Lugger 6414T rated at 165 hp w/ Twin Disc 509. New Kubota diesel w/ MER 22kW genset. Packs 10,000# frozen product in insulated fish hold. New blast freezer system w/ custom built Colmac...
More Details- Year:
- 1989
- Length:
- 46
- Hull:
- Aluminum
- Builder:
- Bram Mfg, F.H. Marine
- Location:
- Washington
46’x15’x5.9’ aluminum combination vessel, built by Bill Redding in 1989. Tier 2 John Deere 6068T main, rated at 250 hp, and ZF reduction gear. Northern Lights 20 kW genset, new in 2018. 800 gallon fuel capacity in (2) tanks. Fish hold packs 6.5 tons. Setup to blast...
More Details- Year:
- 1975
- Length:
- 58
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Wood
- Location:
- Oregon
38’x11.4’x5’ wooden troller/crabber built in 1970 in Longview, WA. Perkins 6354 rated at 140 hp w/ Capitol gear. PTO connected with Pitts Clutch connected to 36 GPM hydraulic pump. Kolstrand (3) spool salmon gurdies, Junes crab block, trolling cockpit and anchor winc...
More Details- Year:
- 1995
- Length:
- 99
- Hull:
- Steel
- Builder:
- Johnson
- Location:
- Washington
99’x25’x12’ steel tuna vessel built by Johnson in 1995. Caterpillar 3412 main engine rated at 525 hp. Twin Disc 510 gear. 28k gallons fuel capacity in (7) tanks. (2) 75 kW Caterpillar 3304 and 20 kW Isuzu gensets. Packs 200k# blast-frozen tuna in (7) insulated hold...
More Details- Year:
- 1999
- Length:
- 85
- Hull:
- Steel
- Builder:
- Fred Wahl
- Location:
- Oregon
85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....
More Details- Year:
- 1967
- Length:
- 48
- Hull:
- Steel
- Builder:
- Unknown
- Location:
- Oregon
48’x14.3’x9.5’ steel crabber and tuna vessel built in 1967 in Richmond, CA. CAT 3306 main rated at 220 hp w/ Twin Disc 509 gear. Isuzu 4LE2 aux for RSW/ hydraulics and Isuzu 20kw genset. Fuel capacity of 1,600 gallons in (2) steel tanks. 20-ton spray brine system w/...
More Details- Year:
- 1974
- Length:
- 53
- Hull:
- Steel
- Builder:
- Trask
- Location:
- California
54’x18’x9’ steel combination tuna troller / bait boat built by Trask in 1974. Cat 3406T rated at 350 hp. Twin Disc 514 gear w/ 4.5:1 ratio. Isuzu 4BG1N 40 kW and Isuzu 4BG1T 50 kW gensets. (2) Carrier 5F60 compressors, (2) 15 hp motors, titanium condensers and Carve...
More Details- Year:
- 1974
- Length:
- 79
- Hull:
- Steel
- Builder:
- Lawrence
- Location:
- Washington
79’x19’x8’ steel tuna troller built in 1974 by Lawrence. Cummins 855 main engine rated at 400 hp, rebuilt in 2023. Twin Disc 509 gear. Burns 4.5 gph making 7.5 knots. 10k gallons fuel capacity in (6) tanks. GMC 20 kW and Northern Lights 6 kW gen sets. Packs 70 ton...
More Details- Year:
- 1967
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- California
38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...
More Details- Year:
- 1967
- Length:
- 53
- Hull:
- Steel
- Builder:
- Wilwerding
- Location:
- California
53.1’x14.7’x8’ steel crabber/troller combo vessel, built in 1967 by Wilwerding. 250 hp Cummins 855 main w/ Twin Disc 509 gear. Isuzu C240 20kw genset. Fuel capacity of 2,600 gallons in (3) tanks. Fish hold packs 20 tons tuna, and has 10k lb crab tank insert. Spray...
More Details- Year:
- 1945
- Length:
- 69
- Hull:
- Wood
- Builder:
- Hanson
- Location:
- Washington
69’x18’ wood longliner built by Hanson Boat Co. in 1945. Caterpillar 353 main engine rated at 425 hp, installed in 2022. Twin Disc 521 gear with 4:1 ratio. Cruises at 9.5 knots. 30 kW Kubota and 18 kW Yanmar gensets. 3600 gallons fuel capacity in (4) tanks. Packs...
More Details- Year:
- 1977
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- California
47.5’x14’x5.5’ fiberglass freezer troller, crabber, and tuna vessel, built by Sunnfjord in 1977. John Deere 6068 main rated at 200 hp w/ Twin Disc 509 gear. Isuzu 4-cyl aux w/ backup hydraulic system. Insulated fish hold packs 12k-14k frozen at sea salmon. Thermokin...
More Details- Year:
- 1974
- Length:
- 58
- Hull:
- Steel
- Builder:
- Samuel Walker
- Location:
- Oregon
58’x24’x6.2’ steel sponsoned crabber/tuna vessel, built by Samuel Walker in 1974. John Deere main rated at 500 hp. Twin Disc 5114A gear. John Deere 65kw and Isuzu 20kw gensets. Fuel capacity of 6,000 gallons in (6) tanks. Packs 35,000 lbs crab or 20 tons tuna in (2)...
More Details- Year:
- 1977
- Length:
- 52
- Hull:
- Steel
- Builder:
- Leo H. Bohn
- Location:
- Oregon
52’x15’x7’ steel combination vessel rigged for crab, tuna, salmon, longline, and built by leo H. Bohn in 1977. Detroit 871 main rated at 325 hp w/ Twin Disc 509 gear. 65kw John Deere genset. Spray brine system w/ 15-ton compressor. Fish hold packs 50,000 lbs tuna, a...
More Details- Year:
- 1997
- Length:
- 58
- Hull:
- Steel
- Builder:
- Vern Eggleston
- Location:
- Oregon
58’x24’x8’ sponsoned steel combination vessel, rigged for crab, albacore, and squid, built in 1997 by Vern Eggleston. New Cummins 855 main rated at 425 hp,w/ low hours. ZF 350 gear. John Deere 30kw genset and Isuzu 40kw genset w/ PTO hydros. Fuel capacity of 5,400 ga...
More Details- Year:
- 1982
- Length:
- 51
- Hull:
- Steel
- Builder:
- Lenning/Knight
- Location:
- Alaska
51’x16’x7.5’ steel troller built in 1982 by Lenning/Knight. Caterpillar 3306DIT main engine rated at 220 hp. Capitol 4HE10700 gear with 4:1 ratio. Burns 2.5 gph at 7.5 knots. 3500 gallons fuel capacity in (5) tanks. Full-time variable hydraulics, inquire for detail...
More Details- Year:
- 1975
- Length:
- 55
- Hull:
- Steel
- Builder:
- Ross & Bohn
- Location:
- Oregon
55’x15.5’x6.5’ steel combination vessel rigged for crab, salmon, tuna, and built by Ross and Bohn in 1975. Cummins QSL9 main rated at 285 hp, w/ Twin Disc 509 gear. 32kw Onan genset. 3,200 gallon fuel capacity in (6) tanks. Packs 14k lbs crab, or 18 tons albacore in...
More Details- Year:
- 1979
- Length:
- 83
- Hull:
- Aluminum
- Builder:
- Penco
- Location:
- Washington
83’x23’x11’ aluminum tuna troller built by Penco in 1979. (2) Detroit Series 60 mains, each rated at 400 hp. Twin Disc MG514 gears. (2) John Deere 4045 40 kW gensets. (2) insulated fish holds pack 166k lbs or 83 tons of frozen product. Carlyle 5H-40 hp and (2) Carly...
More Details- Year:
- 1975
- Length:
- 50
- Hull:
- Fiberglass
- Builder:
- Uniflite
- Location:
- Oregon
50’x15’x6.5’ fiberglass troller built in 1975 by Uniflite. Cat 3116T main engine rated at 300 hp. Twin Disc 5061 gear with 3:1 ratio. Cruises at 8 knots. Onan 7 kw gen set. 20,000# capacity. Deck equipment includes hayrack, (2) tuna pullers and (2) 3-spool salmon g...
More Details- Year:
- 1980
- Length:
- 54
- Hull:
- Steel
- Builder:
- Cobble Hill
- Location:
- British Columbia
54’x17’x8’ steel schooner built in 1980 at Cobble HIll in Vancouver, BC. GMC 671 main engine rated at 190 hp. Twin Disc 509 gear with 3:1 ratio. 7 kW Isuzu gen set. Holds 1,500 gallons fuel in (2) tanks. 15 ton blast freeze system with (5) plates. Packs 38,000# of...
More Details- Year:
- 1967
- Length:
- 57
- Hull:
- Steel
- Builder:
- Don Larsen
- Location:
- Washington
57’x18’ steel tuna vessel built by Don Wells in 1967. GMC 671 main engine rated at 200 hp. Tonanco 729 gear. 4k gallons fuel capacity. 35 kW Isuzu 4BG1 and 6 kW Yanmar gen sets. Packs 40k# in (1) fish hold, blast-frozen. Includes tuna pullers and safety equipmen...
More Details- Year:
- 1990/2017
- Length:
- 58
- Hull:
- Steel
- Builder:
- Martin Allen Design
- Location:
- Oregon
58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna. Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017. Cummins K19 main rated at 600 hp, new in 2017. Twin Disc gear. 100kW and 65kW...
More Details- Year:
- 1986
- Length:
- 47
- Hull:
- Wood
- Builder:
- Thames
- Location:
- Oregon
47’x13’x6’ wood freezer troller rigged for salmon and tuna, built 1986 by Thames Boat Works (Canada). CAT 3306 main rated at 170 hp w/ Twin Disc 509 gear. Fuel capacity of 1,000 gallons in (2) tanks. Blast freeze unit w/ 05GX Carrier compressor. Fish hold packs 20,0...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Hoquiam
- Location:
- California
38.5’x13’x5’ fiberglass Hoquiam crabber/troller built in 1970. Detroit 653 main rated at 150 hp w/ Twin Disc gear. 3kw Honda genset. Fuel capacity of 500 gallons in (2) tanks. Packs 12,000 lbs frozen tuna. Blast freeze system w/ Carrier 5f-30 compressor. Rece...
More Details- Year:
- 1953
- Length:
- 62
- Hull:
- Steel
- Builder:
- National Steel and Shipbuilding
- Location:
- Oregon
62’x18’ steel tuna/tender vessel originally built by National Steel and Shipbuilding for the US Army in 1953. GMC 8V71 rated at 350 hp, low hours. Twin Disc 509 with 4:1 ratio. 40 kW John Deere gen set. Packs 60k# in RSW, 40k# frozen. 18 ton IMS chiller. Jerry Resl...
More Details- Year:
- 1973
- Length:
- 41
- Hull:
- Fiberglass
- Builder:
- Custom, Monk design
- Location:
- Hawaii
41’x12’x6’ custom fiberglass tuna longliner and troller, built in 1973. Detroit 453 main rated at 140 hp w/ 1,500 hrs on rebuild and Borg Warner Velvet drive gear. 15kW Kubota genset. 650 gallon fuel capacity in (4) tanks. Packs 8,000 lbs in (3) fiberglass fish hold...
More Details- Year:
- 1979
- Length:
- 62' 3.5"
- Hull:
- Steel
- Builder:
- Monk design, OK Welding
- Location:
- California
62’3.5"x19’x10’ steel combination vessel rigged for trawl and tuna. Monk design, built by OK Welding in 1979. Cummins KT 1150 main w/ Twin Disc 514 gear. 6-cyl John Deer aux and 40kW Isuzu genset. 6,000 gal fuel capacity in (6) tanks. Blast freeze system, 5F40 comp...
More Details