- Year:
- 1993
- Length:
- 26
- Hull:
- Aluminum
- Builder:
- Munson
- Location:
- Washington
26’x10’ aluminum skiff with enclosed house, originally built for NOAA in 1993. Caterpillar 3208 main engine rated at 185 hp, low hours. ZF 1RM2200-LD gear with 1.855:1 ratio. Fully enclosed house with 2-man bench, helm, and heater. Call for survey. Asking $35,000,...
More Details- Year:
- 1931
- Length:
- 71
- Hull:
- Wood
- Builder:
- Unknown
- Location:
- Alaska
71’x19’ wood tender vessel built in 1931 by Menchins. Caterpillar 343A main engine rated at 365 hp, rebuilt in 2018. Caterpillar 5L3968 gear with 6:1 ratio. Burns 8 gph at 8 knots. 2200 gallons fuel capacity in (2) tanks. Low-hours GMC 471 auxiliary w/PTO and new g...
More Details- Year:
- 1987
- Length:
- 54
- Hull:
- Fiberglass
- Builder:
- Schoeppe & Aadsen
- Location:
- Alaska
54’x15.6’x6’ fiberglass, double ended troller, built in 1987. Rebuilt Detroit 671 rated at 185 hp w/ new exhaust. Twin Disc 509 gear w/ trolling valve. Mitsubishi 30 kw genset. Single fish hold packs 28,000 lbs of blast frozen tuna. Refurbished blast freeze system w...
More Details- Year:
- 2021
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Svendsen
- Location:
- Alaska
34’x12’x2’ new aluminum Svendsen built in 2021, rigged for crab, shrimp, and longline. Twin Honda 225hp outboards w/ 190 hours each. Cruises at 25kts, and does 44kts WOT. Fuel tank holds 340 gallons. (4) fish holds pack a reported 5,000 lbs. Deck equipment includes...
More Details- Year:
- 1971
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x11’x2.5’ aluminum, RSW, Bristol Bay gillnetter, built by Shore in 1971. Cummins BT6 main rated at 250 hp w/ Newage reduction gear. 4-blade stainless prop, dripless bearing. Vickers V20 hydraulic pump. PacWest 5.5-ton RSW system. Packs 14,000 lbs in (8)...
More Details- Year:
- 1986
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All Points
- Location:
- Alaska
32’x16’ aluminum, Bristol Bay gillnetter, built by All Points in 1986. (2) Detroit 6V92 each rated at 550 hp w/ Twin Disc 5111 reduction gears. Double bottomed fish holds chill 15k lbs in (8) holds. IMS 7.5 ton RSW system. (2) fuel tanks w/ 600 gallons combined. Up...
More Details- Year:
- 1972
- Length:
- 33
- Hull:
- Fiberglass
- Builder:
- Westport
- Location:
- Washington
33’x11’x5’ fiberglass Westport charter vessel built in 1972. John Deere 6068 main rated at 225 hp w/ Twin Disc 506A gear. Fuel capacity of 240 gallons in (2) fiberglass tanks. Cruises at 11-12 knots. Electronics include Garmin 192C GPS/plotter/sounder, Garmin 3010C...
More Details- Year:
- 1967
- Length:
- 53
- Hull:
- Steel
- Builder:
- Wilwerding
- Location:
- California
53.1’x14.7’x8’ steel crabber/troller combo vessel, built in 1967 by Wilwerding. 250 hp Cummins 855 main w/ Twin Disc 509 gear. Isuzu C240 20kw genset. Fuel capacity of 2,600 gallons in (3) tanks. Fish hold packs 20 tons tuna, and has 10k lb crab tank insert. Spray...
More Details- Year:
- 2016
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Freestyle Marine
- Location:
- Alaska
32’x14’ fiberglass Bristol Bay gillnetter, built by Freestyle Marine in 2016. Caterpillar 12.9 liter main engine rated at 1,000 hp. 3,000 hours on main. Twin Disc MG-5114SC gear with 1.5:1 ratio. Makes 33 knots WOT. 600 gallons fuel capacity. Packs 32k# in (8) ins...
More Details- Year:
- 1989
- Length:
- 64
- Hull:
- Aluminum
- Builder:
- Unknown
- Location:
- Washington
64’x16’ aluminum landing craft originally built in 1989, subsequently updated. Twin Caterpillar C-12 main engines rated at 700 hp each, low hours. Twin Disc MG 5114SC gears with 2.4:1 ratio. Makes 31 knots WOT. 6” bow thruster and external stern thruster. 6 kW Nort...
More Details- Year:
- 1990
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Bay Craft
- Location:
- Alaska
32’x13’ Bristol Bay boat built in 1990 by Bay Craft. Caterpillar 3208 turbo main engine rated at 375 hp, completely rebuilt in 2016. Twin Disc 509 gear, also rebuilt in 2016. 8” bow thruster. Packs 12k# in (10) insulated fish holds. IMS 7.5 ton hydraulic RSW system...
More Details- Year:
- 2016
- Length:
- 52
- Hull:
- Fiberglass
- Builder:
- H&H Marine
- Location:
- California
52’x16’x5’ fiberglass lobster boat rigged for crab and salmon, built by H&H Marine in 2016. Cummins QSMII rated at 610hp, w/ 6,200 hours. ZF F360A gear. Lugger aux w/ 9kw Northern Lights genset. Tanked fish hold packs 5,500 crab, can pack another 10k lbs in totes on...
More Details- Year:
- 1973
- Length:
- 52
- Hull:
- Steel
- Builder:
- Monk
- Location:
- Alaska
52’x16’x6’ Monk designed Cor-Ten steel longliner/troller, built by Port Angeles Shipyard in 1972. Twin Cummins 6BT 5.9L mains rated at 120hp each. Twin Disc 506-1 gears. 15kw Isuzu genset. (2) Vickers variable speed hydarulic pumps. Insulated fish hold packs 30,000...
More Details- Year:
- 1945
- Length:
- 69
- Hull:
- Wood
- Builder:
- Hanson
- Location:
- Washington
69’x18’ wood longliner built by Hanson Boat Co. in 1945. Caterpillar 353 main engine rated at 425 hp, installed in 2022. Twin Disc 521 gear with 4:1 ratio. Cruises at 9.5 knots. 30 kW Kubota and 18 kW Yanmar gensets. 3600 gallons fuel capacity in (4) tanks. Packs...
More Details- Year:
- 1977
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- California
47.5’x14’x5.5’ fiberglass freezer troller, crabber, and tuna vessel, built by Sunnfjord in 1977. John Deere 6068 main rated at 200 hp w/ Twin Disc 509 gear. Isuzu 4-cyl aux w/ backup hydraulic system. Insulated fish hold packs 12k-14k frozen at sea salmon. Thermokin...
More Details- Year:
- 1988
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Independent Shipwrights
- Location:
- Alaska
47’x12.5’x5’ Canadian troller/longliner, built by Independent Shipwrights in 1988. CAT 3306 main rated at 235 hp. w/ Twin Disc 509 gear. Fuel capacity of 1,400 gallons in (3) tanks. Kubota aux, new in 2018, runs hydraulic pump for Frezerite blast freeze system w/ Car...
More Details- Year:
- 1970
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Westport Shipyard
- Location:
- Washington
40’x10.7’x4.6’ fiberglass troller built by Westport Shipyard in 1970 and lengthened 4’ in 1982. John Deere 6068 TFN rated at 201 hp w/ approx 2,450 hrs. Twin Disc 5050A w/ trolling valve. Burns 5 gph at 9 knots. Packs 3k lbs in fiberglass insulated fish hold. New w...
More Details- Year:
- 2007
- Length:
- 44
- Hull:
- Aluminum
- Builder:
- Svendsen Marine
- Location:
- Alaska
44’x13’x2.5’ aluminum, jet, landing craft built by Svendsen Marine in 2007. Twin Cummins QSB 5.9L each rated at 330 hp w/ (2) ZF201 gears and (2) Hamilton 274 water jets. Burns 30 gph at 25 knots. Cargo deck length measures 19’ with a 7’ wide drop gate. Kinematics K...
More Details- Year:
- 1994
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All Points
- Location:
- Alaska
32’x15’ aluminum Bristol Bay gillnetter built in 1994 by All Points. John Deere 6125 main engine rated at 525 hp. Twin Disc 5111A gear. 400 gallons fuel capacity. 8cu, 4.8cu hydraulic pumps. (3) sterring stations. Packs 17k# in (8) holds, double-walled aluminum....
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Chinook
- Location:
- Alaska
32’x11’x33” fiberglass, RSW, Bristol Bay gillnetter, built in 1980 by Chinook. IMS 7.5 ton RSW system. 8” HPS bow thruster. Cat 3208 rated at 425 hp w/ Twin Disc 507 gear. Articulating aluminum drum, (4) shackle capacity, Kinematic power roller. 6 cube Vickers for...
More Details- Year:
- 2004
- Length:
- 28
- Hull:
- Fiberglass
- Builder:
- Buffalo
- Location:
- Washington
28’x11’x5’ fiberglass crabber built by Buffalo Boats in 2004. Volvo D6 main rated at 330 hp, w/ 3,800 hours. Extra outdrive included. Cruises as 12-14 kts, and 31 kts WOT. Northern Lights 6kw genset. Packs 1,500 lbs crab in tanked hold. Complete deck equipment for...
More Details- Year:
- 1960
- Length:
- 54
- Hull:
- Wood
- Builder:
- Jacobsen
- Location:
- Washington
54’x15.5’ wood seiner buiit by Jacobsen in 1960. Caterpillar 3306 main engine rated at 240 hp. Twin Disc 514 gear with 4:1 ratio. 30 kW Kubota gen set. 1k gallons fuel capacity in (2) tanks. Packs 50k# in (2) insulated fish holds. 15 ton IMS RSW system. Deck equi...
More Details- Year:
- 1993
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Wegley
- Location:
- Alaska
32’x13’x36’ top house, Jumbo Wegley built in 1993. Detroit 6V92 rated at 525 hp w/ 6,100 hrs and Twin Disc 5091 gear. Startups and repairs by Johnson Diesel. PacWest 7.5 ton RSW system installed in 2019. Articulating drum, Twister drive, levelwind, Maritime Fab...
More Details- Year:
- 1973
- Length:
- 60
- Hull:
- Steel
- Builder:
- Craig Cochran
- Location:
- Oregon
60’x15’ steel, freezer, tuna schooner, built in 1973 by Craig Cochran in Toledo, OR. Aluminum house, bulbous bow and rolling chocks. Cat 3306 main rated at 235 hp and Twin Disc 509 w/ 3.83:1 gear ratio. Spray brine system w/ 5-F-30 compressor and 10 ton chiller. (3)...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Workboats Northwest
- Location:
- Alaska
32’x11’x5.3’ aluminum, flush deck, RSW, Bristol Bay sternpicker built in 1980 by Workboats Northwest. Cummins QSB 5.9 main rated at 380 hp and Twin Disc 507 gear. 5 ton Pac West RSW system, rebuilt in 2020. 11k pounds total capacity. (2) Eaton 3.8 cube hydraulic ...
More Details- Year:
- 1974
- Length:
- 65
- Hull:
- Wood
- Builder:
- Frostad
- Location:
- California
65’x20’x9’ wood Canadian crabber/troller built by Frostad in 1974. Detroit 12V71 main rated at 350 hp w/ Twin Disc gear. 20kw John Deere and 30kw Detroit 3V71 gensets. Packs 100,000 lbs salmon in (4) tanked/insulated holds. Includes all deck equipment for crab and s...
More Details- Year:
- 1965
- Length:
- 68
- Hull:
- Wood
- Builder:
- Toche
- Location:
- Oregon
68’x20’x8’ wood shrimp trawler w/ permits, built by Toche Boats in 1965. 855 Cummins main rated at 325 hp, w/ Twin Disc 509 gear. Isuzu 4JB1 30kw genset. Fuel capacity of 2,800 gallons in (4) tanks. Fish hold capacity of 50,000 lbs shrimp. Deck equipment includes h...
More Details- Year:
- 2020
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- North River Boats
- Location:
- Alaska
32’x15.5’x36” aluminum, Bristol Bay gillnetter built by North River Boats in 2020. Cruise at 23 kts, light. Man i6 rated at 730 hp w/ ZF360A reduction gear and (5) blade SS prop. Packs 17k lbs below deck in (8) double walled fish holds. IMS 8.5 ton, hydraulic, RSW s...
More Details- Year:
- 1979
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’x36” aluminum, RSW, flush deck, Bristol Bay gillnetter, built by Marco in 1979. Rebuilt Volvo TAMD 70c rated at 300 hp w/ rebuilt Twin Disc gear and new shaft. 8” bow thruster. Recently tuned IMS 7.5 ton RSW system chills 12k lbs in insulated fish holds. Mari...
More Details- Year:
- 2021
- Length:
- 19.5
- Hull:
- Aluminum
- Builder:
- Kodiak Marine
- Location:
- Idaho
19.5’x9.5’ aluminum, shallow draft, skiff built by Kodiak Marine in 2021. Cummins 5.9L rated at 300 hp w/ AWT 272 water jet. 10 hours on the engine. Located in Idaho. Seller can transport to Seattle for Buyer. Reduced to $88,000.
More Details