BG24-001

$30,000
Year:
2003
Length:
42
Hull:
Steel
Builder:
Taylor Enterprises
Location:
Washington

BG24-001

42’x12’ steel utility barge built by Taylor Enterprises (WA) in 2003. Used for habit restoration. 2003 Mercury 90 HP outboard motor. Steel pontoons w/ virgin polyethylene foam. Steel diamond plate deck. Steel pilot house and gantry. Gantry supports 1 ton, electric,...

More Details

BP24-002

$30,000
Year:
1985
Length:
26
Hull:
Fiberglass
Builder:
Miller
Location:
Alaska

BP24-002

26’x10’ fiberglass bowpicker built in 1985 by Miller. Kodiak Marine 496 main rated at 390 hp with Hamilton 1031 jet. Makes 31 knots. Packs 4800# in (1) fish hold. (2) station helm with SeaStar steering and morse controls. Bennet trim tabs. Reel w/ twister drive an...

More Details

BB24-020

$190,000
Year:
1982
Length:
32
Hull:
Fiberglass
Builder:
Wegley
Location:
Alaska

BB24-020

32’x13’ fiberglass, Jumbo Wegley built in 1982. Repowered in 2016 w/ Cummins 6CTA rated at 430 hp w/ ZF280 gear. PacWest 7.5 ton RSW. Packs 14k lbs in (10) high density foam, insulated fish holds. Updated flush deck, fish holds, deck equipment, anchor deck, and wind...

More Details

TE24-004

$350,000
Year:
1974
Length:
64
Hull:
Aluminum
Builder:
Matsumoto Shipyards
Location:
Alaska

TE24-004

64’x17.5’x8’ aluminum Canadian seiner set up to tender salmon. Built by Matsumoto Shipyards in 1974. Cat 3406 rated at 265 hp w/ Twin Disc MG514 gear. Packs 90k lbs combined in (2) fiberglass fish holds. Cold Sea 40 ton RSW w/ 35 hp compressor and all new circ plumb...

More Details

BB24-021

$395,000
Year:
1989
Length:
32
Hull:
Aluminum
Builder:
Kvichak
Location:
Alaska

BB24-021

32’x13.5’ aluminum Bristol Bay boat built by Kvichak in 1989.  Repowered in 2022 w/ John Deere 6090 SFM85 rated at 550 hp and new ZF305-3A gear.  Packs 13k lbs floating in (7) updated fish holds w/ false bottoms.  7.5 ton Pac West RSW.  Fixed Maritim...

More Details

CR24-021

$100,000
Year:
1975
Length:
108
Hull:
Steel
Builder:
Marco
Location:
Washington

CR24-021

108’x27’x9’ steel crabber built by Marco in 1975. Vessel sunk and salvaged in 2024. Reported to pack approximately 360k# pinks in 7,500 cu ft. Machinery and electronics are presumed to not be operable. Asking $100,000, make offers. ******Additional Terms******* V...

More Details

BB24-019

$180,000
Year:
1980
Length:
32
Hull:
Aluminum
Builder:
Marco
Location:
Alaska

BB24-019

32’x12’x2.5’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Marco in 1980. John Deere 6068 rated at 210 hp w/ Twin Disc 506 gear. Diesel drive PacWest 6 ton RSW system w/ 2.5 kW generator.  Packs 10k lbs in (8) newly insulated fish holds. Maritime Fa...

More Details

TR24-015

$120,000
Year:
1973
Length:
40
Hull:
Aluminum
Builder:
Elmer W. McEachern
Location:
Oregon

TR24-015

40’x11.9’x4.8’ aluminum troller built by Elmer W. McEachern (BC) in 1973. John Deere 6068 rated at 210 hp w/ Twin Disc MG550 gear. Packs 10k lbs in (1) newly fiberglassed and insulated fish hold. Crab insert, davit, picking boom, hay rack, (4) single spool gurdies, p...

More Details

BB24-018

$37,000
Year:
1978
Length:
32
Hull:
Fiberglass
Builder:
Modutech
Location:
Alaska

BB24-018

32’x12’x2’ fiberglass, flush deck Bristol Bay boat built by Modutech in 1978. Volvo TAMD70C main rated at 280 hp, w/ only 600 hours after 2019 rebuild. Fuel capacity of 300 gallons in (2) aluminum tanks. Vickers dual belt driven hydraulic pump. Packs 10,000 lbs in (...

More Details

BB24-016

$12,000
Year:
1970
Length:
32
Hull:
Aluminum
Builder:
Matsumoto
Location:
Alaska

BB24-016

32’ aluminum Bristol Bay gillnetter built by Matsumoto in 1970 and rebuilt in 1983. Crusaider 454 gas engine w/ approx 350 hp. Aluminum reel, levelwind and anchor winch. Packs 12,000 lbs in (7) aluminum fish holds. (3) steering stations. Includes contents of locker...

More Details

DV24-002

$85,000
Year:
1975
Length:
36
Hull:
Fiberglass
Builder:
BLRL Marine
Location:
Washington

DV24-002

36’x12’x5’ fiberglass geoduck dive boat built by BLRL Marine in 1975. CAT 3208 main rated at 210 hp, w/ 905 hours. Twin Disc 506 gear. Fuel capacity of 300 gallons in (2) tanks. (2) Honda Gx 340 generators. Packs 12 tons in (4) fish holds. Includes hydraulic davit...

More Details

DV24-001

$100,000
Year:
1979
Length:
40
Hull:
Fiberglass
Builder:
Beck
Location:
Washington

DV24-001

40’x13’ fiberglass dive boat/crabber built by Beck in 1979. GMC 671 main engine rated at 250 hp. 750 gallons fuel capacity. Packs estimated 20k# in one fish hold. Tophouse design. (2) davits on deck. Accommodations include (4) berths, kitchen, and marine head. Re...

More Details

TN24-001

$1,100,000
Year:
1991
Length:
88
Hull:
Steel
Builder:
D&T Marine
Location:
Hawaii

TN24-001

88’x22.5’ steel tuna vessel built by D&T Marine in 1991. Cummins KTA1150 main engine rated at 500 hp. Twin Disc MGX516 with 6:1 ratio. 8.5 knot cruise. Twin 60 kW Cummins 6BT gen sets, (1) 30 kW Cummins 4B gen set. 14k gallons fuel capacity in (10) tanks. (4) fish...

More Details

CR24-020

$3,200,000
Year:
1967
Length:
92
Hull:
Steel
Builder:
Pac Fish
Location:
Washington

CR24-020

92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...

More Details

SP24-009

$82,000
Year:
1974
Length:
38
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SP24-009

38’x13’ fiberglass gillnet/crab/shrimp vessel built in 1974 by Delta. Volvo TAMD61A main engine rated at 301 hp. Twin Disc MG-509 gear with 2:1 ratio. Burns 5 gph at 7.5 knots. 10 kW Isuzu LB31 gen set. Packs 15k# in (4) insulated fish holds. Deck equipment includ...

More Details

SE24-011

$315,000
Year:
1976
Length:
42
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SE24-011

42’x13’ fiberglass seiner/crabber built by Delta in 1976, overhauled in 2013-14. John Deere 6090 main engine rated at 330 hp. Twin Disc gear with 2.5:1 ratio. Burns 3.5 gph at 7 knots. 18 kW Mitsubishi gen set. Packs 28k# salmon. IMS 12.5 ton RSW system. Vickers...

More Details

CR24-019

$180,000
Year:
1976
Length:
38
Hull:
Fiberglass
Builder:
Delta
Location:
California

CR24-019

38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...

More Details

CR24-017

$225,000
Year:
1968
Length:
36
Hull:
Aluminum
Builder:
McQen
Location:
Washington

CR24-017

36’x12’x2’ aluminum, crabber, Monk design, hull built by McQen in 1968. Hull stored inside, under cover until finished in 2018. Makes 32 knots. Recently installed Volvo D6 rated at 370 hp, w/ apprx 1400 hrs. Humbyrd 15” crab block and hydraulic davit. 16 GPH hydrau...

More Details

CR24-018

$150,000
Year:
1976
Length:
37
Hull:
Aluminum
Builder:
Freeman Marine
Location:
Oregon

CR24-018

37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...

More Details

SP24-008

$75,000
Year:
1970
Length:
36
Hull:
Fiberglass
Builder:
Roberts
Location:
Washington

SP24-008

36’x12.5’x3.5’ fiberglass gillnetter built by Roberts in 1970. CAT 3126b main rated at 450. ZF reduction gear, new in 2019. Fuel capacity of 400 gallons in (2) tanks. Packs 10,000 lbs in (5) tanked and insulated fish holds. Deck equipment includes gillnet reel, lev...

More Details

BB24-015

$220,000
Year:
1980
Length:
32
Hull:
Aluminum
Builder:
Marco
Location:
Alaska

BB24-015

32’x11.5’x2.5’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Marco in 1980. 2015 Yanmar 6LY rated at 440 hp w/ ZF360 gear. Makes 14 knots. Bow thruster. IMS 7.5 ton RSW system. Packs 11k lbs in double walled fish holds w/ insulation. Maritime Fab. re...

More Details

CR24-016

$25,000
Year:
1985
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR24-016

32’x10’x3.6’ fiberglass Radon built in 1985, rigged for crab and salmon. Twin GM 383 gas engines rated at 250hp each. Does 20kts. Fuel capacity of 250 gallons in one tank. Fish hold packs 1,600 lbs crab. Deck equipment includes crab block, davit, boom w/ winch, sal...

More Details

SE24-010

$2,600,000
Year:
1992
Length:
58
Hull:
Steel
Builder:
Bill Berggren
Location:
California

SE24-010

58’x21’x10.5’ steel seiner package w/ skiff and permits, built in 1992 by Bill Berggren. Cummins KTA-19 main rated at 500 hp w/ Twin Disc reduction gear. Northern Lights 60kw and Northern Lights 30kw gensets. 20-ton RSW system w/ titanium chillers. Pakcs 116,000 lbs...

More Details

CO24-005

$2,400,000
Year:
1994
Length:
58
Hull:
Steel
Builder:
Van Peer Boat Works
Location:
Alaska

CO24-005

58’x23’x10’ steel combination seiner/pot/LL/trawler built by Van Peer in 1994. Extensive shipyard at Platypus in 2018. Yanmar 6AYM-FT main rated at 755 hp, new in 2018. Twin Disc MG5222 gear w/ 6:1 ratio. John Deere 99 kW and Kubota 28 kW gensets both new in 2018. P...

More Details

TR24-013

$185,000
Year:
1979
Length:
42
Hull:
Fiberglass
Builder:
SeaMaster
Location:
Alaska

TR24-013

42’x12.5’ fiberglass troller built in 1979 by SeaMaster. GMC 471 main engine rated at 120 hp. Twin Disc gear with 3.83:1 ratio. Makes 7.5 knots, 1k gallons fuel capacity. Eaton 421 hydraulics. Packs 9500# frozen coho (1) fish hold, plate freezer system. Includes E...

More Details

CO24-004

$780,000
Year:
1995
Length:
58
Hull:
Steel
Builder:
Studeman
Location:
Oregon

CO24-004

58’x20’x9.5’ steel combination vessel built in Reedsport, OR by Scott Studeman in 1995. John Deere 6135 main rated at 425hp w/ Twin Disc 5114 gear. (2) John Deere 4045 65kw gensets. Fish hold w/ removable partitions packs 33,000 lbs crab w/ aft section as bait freeze...

More Details

TR24-012

$50,000
Year:
1973
Length:
38
Hull:
Wood
Builder:
Sather
Location:
Alaska

TR24-012

38’x11’x5.5’ wooden salmon troller built by Sather (BC) in 1973. Updated John Deere 4045 TFM rated at 135 hp w/ ZF-63 gear w/ 1:2.4 ratio. Packs approx. 4.8 tons in single fish hold. Kolstrand 3-spool gurdies, picking boom w/ electric winch. Vickers V20 hydraulic pu...

More Details

BB24-014

$170,000
Year:
1989
Length:
32
Hull:
Fiberglass
Builder:
Wegley
Location:
Alaska

BB24-014

32’x13’ fiberglass Jumbo Wegley buiit in 1989. Cummins QSC main engine rated at 550 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Makes 12 knots. Packs 15k# in (12) insulated holds. IMS 7.5 ton RSW system. Deck equipment incudes Maritime Fab reel and Ki...

More Details

CR24-015

$340,000
Year:
2018
Length:
33
Hull:
Aluminum
Builder:
ACI
Location:
Washington

CR24-015

33’x11’x2’ aluminum crabber built by ACI in 2018. Twin Honda 250hp outboards. Cruises at 22kts and does 40kts WOT. Fuel capacity of 200 gallons in (2) tanks. 13hp power pack w/ 30 gallon hydraulic tank. 15” Junes crab block, hydraulic davit, and dump box. Fish hold...

More Details

SP24-007

$165,000
Year:
1978
Length:
32
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP24-007

32’x11.5’ fiberglass sternpicker built in 1978 by Roberts. Volvo TAMC70D main engine rated at 260 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Packs 9k# in (6) insulated fish holds. Deck equipment includes Maritime Fab drum, levelwind, rower roller, and...

More Details

Sign up for email updates