BB24-041

$225,000
Year:
1989
Length:
32
Hull:
Aluminum
Builder:
Persinger
Location:
Alaska

BB24-041

32’x14’x36” aluminum, RSW, flush deck BB gillnetter built by Persinger in 1989. Factory re-man CAT 3208 rated at 360 hp w/ Twin Disc gear, installed in 2020. Packs 18,000 lbs in (6) insulated fish holds. IMS 7.5 ton RSW installed in 2021. Kinematics drum, internal d...

More Details

BB24-040

$339,000
Year:
1980
Length:
32
Hull:
Aluminum
Builder:
Marco
Location:
Alaska

BB24-040

32’x12’x29” aluminum Bristol Bay boat built by Marco in 1980. Repowered in 2023 w/ FPT EVO 570 rated at 530 hp w/ new Twin Disc MG 5075 gear. Packs 12k lbs floating in (8) updated fish holds w/ false bottoms. 7.5 ton Pac West RSW w/ transom condenser unit. New compress...

More Details

TR24-024

$360,000
Year:
1974
Length:
46
Hull:
Steel
Builder:
Zeigler
Location:
Washington

TR24-024

46’x14.3’x6’ steel freezer troller built in 1974 by Zeigler, and also rigged for longline and spot prawns. CAT 3306TA main rated at 300 hp, w/ recent top-end rebuild. Twin Disc 509 gear. Isuzu C240 30kw genset. Fuel capacity of 2,000 gallons in (5) tanks. Fish Hold...

More Details

BB24-039

$550,000
Year:
2012
Length:
32
Hull:
Aluminum
Builder:
Master Marine
Location:
Alaska

BB24-039

32’x14.5’x34” aluminum, Bristol Bay gillnetter built in 2012 by Master Marine. Scania Di60m 12L rated at 600 hp w/ ZF360A gear. Updated diesel drive PacWest 8.5 ton RSW system. (8) insulated, double zoned, fish holds pack 22k lbs. 10” bow thruster. Curry narrow dru...

More Details

BB24-038

$775,000
Year:
2022
Length:
32
Hull:
Aluminum
Builder:
JWS Fabrication
Location:
Alaska

BB24-038

32’x15.5’x18” aluminum, Bristol Bay jet boat built by JWS Fabrication and finished at C-Street in 2022. Scania D13L rated at 750 hp w/ approx 1500 hrs. ZF360 reduction gear w/ C-Pad PTO. HI 600B 24” water jet. 9” bow thruster. 10 ton PacWest, transom cooler, RSW sys...

More Details

CO24-010

$1,300,000
Year:
1979
Length:
58
Hull:
Fiberglass
Builder:
Delta Marine
Location:
Alaska

CO24-010

58’x19’ fiberglass combination vessel built in 1979 by Delta, recently repowered. Brand new John Deere 6065 main engine rated at 500 hp. Twin Disc MG518 gear with 4.5:1 ratio. Brand new gen sets, (1) 70 kW John Deere 4045 and (1) 28 kW MER/Kubota. Packs 115k# in (2)...

More Details

CO24-008

$550,000
Year:
1969
Length:
58
Hull:
Steel
Builder:
Pete Shires
Location:
Alaska

CO24-008

58’x16.8’x8’ steel combination seiner/troller/pot boat, built by Pete Shires in 1969. Rebuilt Detroit 8V92 rated at 450 hp w/ recently rebuilt Twin Disc 514c gear. Recent shaft work w/ new cutlass, dripless, and intermediate bearing. John Deere 4034T 35kW aux. Pack...

More Details

LC24-003

$600,000
Year:
1953
Length:
74
Hull:
Steel
Builder:
US Army - Higgins Boat
Location:
Washington

LC24-003

74’x22’x5’ shallow draft steel landing craft, originally built for US Army by by Higgins Boat Works in 1953. Refitted for tendering and freight hauling. Twin GMC 12V71 main engines rated at 365 hp each. Twin Disc MG514 gears with 2.0:1 ratio. Makes 7-8 knots. (1) 5...

More Details

LC24-002

$600,000
Year:
1967
Length:
74
Hull:
Aluminum
Builder:
US Army - Marinette Marine
Location:
Washington

LC24-002

74’x21’x5’ shallow draft aluminum landing craft, originally built for the US Army by Marinette Marine Corp in 1967. Refitted for tendering and freight hauling. Twin Caterpillar C9 ACERT main engines rated at 503 hp each. Twin Disc MG509 gears with 2.95:1 ratio. Make...

More Details

CR24-033

$495,000
Year:
2022
Length:
37
Hull:
Fiberglass
Builder:
Cuimond Marine/Millenium
Location:
Washington

CR24-033

37’x13’x4’ fiberglass crabber, Millenium hull, built by Guimond Marine in 2022. Ad-measured, eligible for US fisheries. Twin Yamaha outboards, 425 hp each, low hours. 23 knot cruise, 40 knots WOT. 300 gallons fuel capacity in (2) tanks. Predator 20 hp generator and...

More Details

CR24-031

$550,000
Year:
1977
Length:
47
Hull:
Fiberglass
Builder:
Delta
Location:
California

CR24-031

47’x14’x5’ fiberglass Delta built in 1977 and rigged for crab and troll fisheries. Recently stretched and added aluminum top house. Cummins 855 main rated at 360 hp w/ Twin Disc 509 gear. Northern Lights 12kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Foa...

More Details

CR24-032

$310,000
Year:
2006
Length:
44
Hull:
Aluminum
Builder:
Edwing
Location:
Washington

CR24-032

44’x15’x5’ aluminum crabber built by Edwing in 2006. John Deere 6135SFM85 rated at 650 hp, new in 2021. Rebuilt Twin Disc MG511 reduction gear. Northern Lights 12kW gen set w/ wet exhaust, gen new in 2017. Packs 12k lbs crab in single fish hold. N.W. Propeller 20”...

More Details

CR24-030

$960,000
Year:
1974
Length:
58
Hull:
Fiberglass
Builder:
Kettenburg
Location:
California

CR24-030

58’x20’x8’ fiberglass vessel built by Kettenburg in 1974, and rigged for crab, salmon troll, and tuna. Cummins QS MII main rated at 455 hp. Twin Disc MGX 5114 gear. (2) 65kw John Deere 4045TFM gensets. 50-ton Sea Water RSW system w/ (2) compressors and spray brine s...

More Details

CO24-007

$500,000
Year:
2005
Length:
50
Hull:
Fiberglass
Builder:
William Perry
Location:
California

CO24-007

50’x21.5’x4’ fiberglass over wood combination vessel built in 2005 by William Perry in Canada, currently rigged as squid light boat. CAT C18 main rated at 469 hp, w/ Twin Disc MGX516 gear. 15kw Stamford and 50kw Kubota gensets. Fuel capacity of 2,000 gallons in (6) t...

More Details

SK24-004

$170,000
Year:
2015
Length:
18
Hull:
Aluminum
Builder:
Tyler
Location:
Washington

SK24-004

18.5’x9.5’ jet skiff built in 2015 by Tyler Boats. FTP 6.7 main tuned to 450 hp w/ new engine panel, and recently gone through by FTP engineers. ZF reduction gear. 305HD MJP jet. 80 gallon fuel tank. Hydraulic sea catch release. Very well maintained skiff in excel...

More Details

CR24-029

$130,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR24-029

32’x10’ fiberglass 1979 Radon, rigged for crab with CA 250-pot crab permit with a baseline length of 32’ LOA and CA salmon permit. Cummins CTA 450 hp main. 12 to 14 knot cruise, 18 knot WOT. 300 gallons fuel capacity. 2,000# hold capacity, 3,000# in totes on deck. Compl...

More Details

TR24-023

$175,000
Year:
1985
Length:
38
Hull:
Fiberglass
Location:
Washington

TR24-023

38’x11’x8’ custom fiberglass troller/longliner built in 1985. John Deere 4045TFM main engine rated at 135 hp. Borg Warner Velvet Drive gear with 2.91:1 ratio. Makes 7 knots, burns 2 gph. Packs 9k# in (1) fish hold w/slush bags and brailer bags. (3) bunks in fo’c’sl...

More Details

BB24-037

$150,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Wegley
Location:
Alaska

BB24-037

32’x12.3’ fiberglass, RSW, Bristol Bay gillnetter built by Wegley in 1979. Volvo Penta 61A rated at 320 hp w/ Twin Disc reduction gear. Makes 10 knots. IMS 7.5 ton RSW. Packs 10,500 lbs in (13) bags. Electric bow thruster. Articulating drum. Electronics include (...

More Details

BB24-036

$400,000
Year:
1991
Length:
32
Hull:
Fiberglass
Builder:
Bay Marine/Lindell
Location:
Alaska

BB24-036

32’x16’ fiberglass Bristol Bay gillnetter built by Bay Marine and finished by Lindell Boats in 1991. MAN D2862LX rated at 825 hp w/ ZF360A reduction gear. Packs 26,500 lbs in (10) insulated fish holds. Mitsubishi 7 kW gen set. IMS 7.5 ton RSW. Maritime Fab. fixed r...

More Details

TR24-022

$52,000
Year:
1961
Length:
40
Hull:
Steel
Location:
Alaska

TR24-022

40’x 12.5’ troller/motor sailboat built in 1961. Isuzu 6BD-1PV main makes 130 hp. Twin Disc MG5050 gear. Packs 7k# in (1) insulated fish hold. (2) staterooms, berths for (4), stove, and sink. Deck equipment includes longline winch and davit, additional trolling gear...

More Details

TR24-021

$87,000
Year:
1979
Length:
37
Hull:
Steel
Builder:
Robert F. Bilodeau
Location:
Alaska

TR24-021

37’x12.7’8.7’ steel, ketch style, freezer troller, built by Robert F. Bilodeau in 1979. GMC 4-71N rated at 110 hp w/ Twin Disc 506 MG. (2) insulated fish holds w/ 5 ton blast freeze unit, new in 2014. (2) Kolstrand 3 spool gurdies. Aluminum rigging, davit and shelte...

More Details

SK24-003

$45,000
Year:
1992
Length:
23
Hull:
Aluminum
Builder:
All-American
Location:
Washington

SK24-003

23’ aluminum All-American skiff built in 1992. 90 hp Honda 4-stroke outboard. 13 hp Honda power pack hydros by LFS. Gillnet reel w/levelwind and crab block. Hydraulic steering station. 22 gallon fuel tank with filter. Anchor gear, 12V batteries, and bilge pumps. D...

More Details

CR24-026

$125,000
Year:
1978
Length:
32
Hull:
Aluminum
Builder:
American Commercial
Location:
Oregon

CR24-026

32’x11.4’x5.5’ aluminum gillnetter rigged for crab, built in 1978 by American Commercial. 210 hp CAT 3208 main. Fuel capacity of 200 gallons in (2) tanks. Hydraulic steering w/ (3) stations. (4) insulated fish holds, (2) are tanked. Deck equipment includes crab dav...

More Details

SE24-013

$275,000
Year:
1979
Length:
50
Hull:
Steel
Builder:
Randy of Moss Landing
Location:
Washington

SE24-013

50’x16.4’x7.6 steel seiner/crabber built in Moss Landing, CA in 1979. John Deere 6090 rated at 330 hp w/ Twin Disc 5114 gear, both new in 2013. Isuzu B4BG1-B w/ 40 kW and new 12 kW gen sets. Packs 42k lbs in insulated fish hold. 30 ton titanium chiller, Carrier comp...

More Details

SP24-011

$200,000
Year:
1995
Length:
38
Hull:
Fiberglass
Builder:
Wegley/Rozema
Location:
Alaska

SP24-011

38’x12’x6’ fiberglass sternpicker built by Wegley and finished by Rozema in 1995. Volvo TAMD 122P rated at 600 hp, with 6,500 hrs on 2015 rebuild. ZF reduction gear w/ 1.50:1 ratio. Fuel capacity of 600 gallons in (2) tanks. IMS 8.5-ton hydraulically driven RSW syst...

More Details

BB24-035

$600,000
Year:
1995
Length:
32
Hull:
Aluminum
Builder:
Edwing
Location:
Alaska

BB24-035

32’x15’x2’ Bristol Bay jet boat, built in 1995 by Edwing. Twin Cummins QSC mains make 600 hp each, 15” Ultra 340HT jets, ZF gears. Makes 35 knots. Packs 20k# in (15) fish holds. IMS 10-ton RSW system. Deck equipment includes Maritime Fab levelwind, White motor, Big...

More Details

CR24-028

$350,000
Year:
1978
Length:
50
Hull:
Fiberglass
Builder:
Sunnfjord
Location:
Oregon

CR24-028

50’x15’x7’ fiberglass craber/troller built in 1978 by Sunnfjord. GMC 671 makes 250 hp, rebuilt in 2019. Twin Disc MG509 gear with 2.8:1 ratio. 30 kW Isuzu 4-cyl gen set. Packs 20k# crab in (1) fish hold. 10-ton RSW system. Accommodations include (2) staterooms wit...

More Details

CR24-027

$200,000
Year:
1971
Length:
50
Hull:
Steel
Builder:
Yaquina
Location:
Oregon

CR24-027

50’x14’x7’ steel crabber/troller built in 1971 by Yaquina. Caterpillar 3208 main engine makes 240 hp. Twin Disc 506 gear with 2.96:1 ratio. 25 kW Isuzu 4-cyl gen set. Packs 10k# in crab insert. Accommodations include v-berth, full galley, and head w/shower. Gear a...

More Details

TR24-020

$160,000
Year:
1980
Length:
48
Hull:
Wood
Builder:
Wahl (Canadian)
Location:
Washington

TR24-020

48’x15.5’x8’ wood troller built in 1980 by Wahl Boatyard (Canada). 855 Cummins main reated at 195 hp w/ Twin Disc 509 gear. Kubota aux. Fuel capacity of 1,800 gallons in (4) tanks. Fiberglassed fish hold packs 20,000 lbs. Deck equipment includes 3-spool Easthope g...

More Details

TE24-007

$1,500,000
Year:
1977
Length:
90
Hull:
Steel
Builder:
Barbour Boat
Location:
Alaska

TE24-007

90’x28’x3’ steel Bristol Bay tender built in 1977 by Barbour Boats, retrofitted in 2019-2020. 3408 Caterpillar port main makes 500 hp and 3408 Caterpillar starboard main makes 700 hp. Twin Disc gears. New port shaft 2024, new shaft starboard 2022. Twin Caterpillar C...

More Details

Sign up for email updates