- Year:
- 1979
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Formosa
- Location:
- California
40’x14’x3.5’ fiberglass troller also rigged for black cod, built in 1979 by Formosa Boat Building. 160 hp Perkins main w/ Twin Disc 373 gear. Lugger w/ 20 kw Northern Lights genset. Fish hold packs 8,000 lbs. Deck equipment includes set of 3-spool gurdies, longline...
More Details- Year:
- 1975
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Alaska
45’x13.5x9.5’ fiberglass Sunnfjord freezer-troller built in 1975, also rigged for longline and spot prawns. John Deere 6068 main rated at 225 hp w/ Twin Disc 506 gear. Isuzu 30kw genset. Fuel capacity of 1,250 gallons in (4) tanks. Fish hold packs 8,000 lbs frozen p...
More Details- Year:
- 1988
- Length:
- 43
- Hull:
- Fiberglass
- Builder:
- Cascade
- Location:
- California
43’x12’x6.5’ fiberglass troller built by Cascade in 1988. New Cummins 4.3L rated at 80 hp installed 2022 w/ Warner gear, rebuilt in 2022. One insulated fish hold packs 3,000 lbs. Includes gurdies and misc. salmon and tuna gear. Electronics include Raymarine GPS, rad...
More Details- Year:
- 1967
- Length:
- 41
- Hull:
- Wood
- Builder:
- Von Pegert-Humbert
- Location:
- Oregon
41’x11.9’x5.5’ wooden crabber/troller built by Von Pegert-Humbert in 1967. Detroit 671 rate at 165 hp with Tonan 509 gear. Tandem 20 gal hydraulic pumps. Single fish hold packs approx 11k lbs. (2) 3-spool Kolstrand gurdies, 17” Marco power block. Electronics include...
More Details- Year:
- 1974
- Length:
- 53
- Hull:
- Steel
- Builder:
- Trask
- Location:
- California
54’x18’x9’ steel combination tuna troller / bait boat built by Trask in 1974. Cat 3406T rated at 350 hp. Twin Disc 514 gear w/ 4.5:1 ratio. Isuzu 4BG1N 40 kW and Isuzu 4BG1T 50 kW gensets. (2) Carrier 5F60 compressors, (2) 15 hp motors, titanium condensers and Carve...
More Details- Year:
- 1974
- Length:
- 79
- Hull:
- Steel
- Builder:
- Lawrence
- Location:
- Washington
79’x19’x8’ steel tuna troller built in 1974 by Lawrence. Cummins 855 main engine rated at 400 hp, rebuilt in 2023. Twin Disc 509 gear. Burns 4.5 gph making 7.5 knots. 10k gallons fuel capacity in (6) tanks. GMC 20 kW and Northern Lights 6 kW gen sets. Packs 70 ton...
More Details- Year:
- 1973
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- California
36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...
More Details- Year:
- 1965
- Length:
- 42
- Hull:
- Wood
- Builder:
- Remen
- Location:
- Oregon
42’x12’x7’ wood troller/crabber with permits, built by Remmen in 1965. Detroit v6-71 main rated at 165hp w/ Capital gear. Fuel capacity of 800 gallon in (4) tanks. Fiberglassed fish hold packs 8 tons iced tuna, and 8k lbs crab in insert. Deck equipment includes 19” J...
More Details- Year:
- 1967
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- California
38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...
More Details- Year:
- 1928
- Length:
- 46
- Hull:
- Wood
- Builder:
- Strom & Orum
- Location:
- California
46’x13’x7’ wood troller/crabber with permits, built in 1928 by Strom and Orum in Tacoma, WA. Detroit 671 main rated at 165 hp, w/ 2,500 rebuilt hrs. Twin Disc 509 gear. Perkins 7.5 kW genset. Fish hold packs 24,000# not tanked, 9,000# in crab instert, and 6,000# sal...
More Details- Year:
- 2005
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Custom
- Location:
- California
34’10”x16’x4’ custom aluminum vessel built in 2005 and significantly updated in 2016, rigged for crab and troll fisheries. John Deere 6068 main rated at 330 hp w/ 8,700 hours. ZF 22A gear. Westerbeke 7.6 kW genset. 260 gallon fuel tank. Tanked fish hold packs 6,000...
More Details- Year:
- 1987
- Length:
- 54
- Hull:
- Fiberglass
- Builder:
- Schoeppe & Aadsen
- Location:
- Alaska
54’x15.6’x6’ fiberglass, double ended troller, built in 1987. Rebuilt Detroit 671 rated at 185 hp w/ new exhaust. Twin Disc 509 gear w/ trolling valve. Mitsubishi 30 kw genset. Single fish hold packs 28,000 lbs of blast frozen tuna. Refurbished blast freeze system w...
More Details- Year:
- 1973
- Length:
- 52
- Hull:
- Steel
- Builder:
- Monk
- Location:
- Alaska
52’x16’x6’ Monk designed Cor-Ten steel longliner/troller, built by Port Angeles Shipyard in 1972. Twin Cummins 6BT 5.9L mains rated at 120hp each. Twin Disc 506-1 gears. 15kw Isuzu genset. (2) Vickers variable speed hydarulic pumps. Insulated fish hold packs 30,000...
More Details- Year:
- 1977
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- California
47.5’x14’x5.5’ fiberglass freezer troller, crabber, and tuna vessel, built by Sunnfjord in 1977. John Deere 6068 main rated at 200 hp w/ Twin Disc 509 gear. Isuzu 4-cyl aux w/ backup hydraulic system. Insulated fish hold packs 12k-14k frozen at sea salmon. Thermokin...
More Details- Year:
- 1974
- Length:
- 65
- Hull:
- Wood
- Builder:
- Frostad
- Location:
- California
65’x20’x9’ wood Canadian crabber/troller built by Frostad in 1974. Detroit 12V71 main rated at 350 hp w/ Twin Disc gear. 20kw John Deere and 30kw Detroit 3V71 gensets. Packs 100,000 lbs salmon in (4) tanked/insulated holds. Includes all deck equipment for crab and s...
More Details- Year:
- 1937
- Length:
- 56
- Hull:
- Wood
- Builder:
- Carlson
- Location:
- Washington
56’x16’ wood seiner rigged to power troll. Hansen design, built by Carlson in 1937. Cat DI3000 rated at 120 hp w/ Twin Disc gear. Blast freeze system w/ Kubota driven 15 ton Carrier 056 compressor. Easthope gurdies, WL Junes tuna pullers, Thompson anchor winch. Pac...
More Details- Year:
- 1977
- Length:
- 52
- Hull:
- Steel
- Builder:
- Leo H. Bohn
- Location:
- Oregon
52’x15’x7’ steel combination vessel rigged for crab, tuna, salmon, longline, and built by leo H. Bohn in 1977. Detroit 871 main rated at 325 hp w/ Twin Disc 509 gear. 65kw John Deere genset. Spray brine system w/ 15-ton compressor. Fish hold packs 50,000 lbs tuna, a...
More Details- Year:
- 1999
- Length:
- 40
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Washington
40’x14’x5’ custom aluminum troller/pleasure vessel, built by Rozema Boat Works in 1999. Cummins 6CTA 8.3 main rated at 450 hp, w/ 2,700 hours. Twin Disc w/ troll valve. Northern Lights/Lugger 5kw genset. Fuel capacity of 400 gallons in (2) tanks. (2) insulated fish...
More Details- Year:
- 1967
- Length:
- 39
- Hull:
- Wood
- Location:
- California
39’3”x12’x4’ wood troller/crabber with permits, built in North Bend, OR in 1967. John Deere main rated at 175 hp w/ approx 3,300 hours. Twin Disc 5050SC gear. 440 gallon fuel capacity in (2) tanks. Briggs & Stratton gas generator. Fish hold packs 5,000 lbs. Includ...
More Details- Year:
- 1998
- Length:
- 38
- Hull:
- Aluminum
- Builder:
- Ed Wing
- Location:
- Oregon
38’x15’x3’ aluminum crabber/troller built by Ed Wing in 1998. Cummins 8.3 main rated at 330 hp w/ 2,000 hours. Twin Disc 507 gear. 600 gallon fuel capacity in (2) tanks. Fish hold packs 10,000 lbs crab. Deck equipment includes crab block, davit, dump box, longline...
More Details- Year:
- 1987
- Length:
- 25
- Hull:
- Fiberglass
- Builder:
- Ken Kraft
- Location:
- California
25’x8.5’x3’ fiberglass fishing vessel, built by Ken Kraft in 1987. Cummins 6bt main rated at 250 hp w/ 3,000 hours and ZF gear. 90 gallon fuel capacity in (2) tanks. Does 19 kts. Electronics include GPS, VHF, sounder, plotter, and autopilot. Asking $31,000.
More Details- Year:
- 1982
- Length:
- 51
- Hull:
- Steel
- Builder:
- Lenning/Knight
- Location:
- Alaska
51’x16’x7.5’ steel troller built in 1982 by Lenning/Knight. Caterpillar 3306DIT main engine rated at 220 hp. Capitol 4HE10700 gear with 4:1 ratio. Burns 2.5 gph at 7.5 knots. 3500 gallons fuel capacity in (5) tanks. Full-time variable hydraulics, inquire for detail...
More Details- Year:
- 1976
- Length:
- 43
- Hull:
- Fiberglass
- Builder:
- Delta Marine
- Location:
- Alaska
43’x14’x6’ fiberglass pleasure/troller built by Delta Marine in 1976. Twin Cat 3208 NA, each rated at 210 hp w/ Twin Disc MG 506G. Easthope gurdies, updated aluminum hayrack, trolling poles, and rigging. Packs apprx 4k lbs combined in (2) deck totes and (1) tote belo...
More Details- Year:
- 1974
- Length:
- 52
- Hull:
- Fiberglass
- Builder:
- Little Hoquiam
- Location:
- Alaska
52’x16’ fiberglass seiner built in 1974 by Little Hoquiam. Brand new John Deere AFM856090 main engine makes 325 hp. Factory rebuilt Twin Disc C110HP3 reduction gear. 30 kW Isuzu 4801 gen set. 700 gallons fuel capacity in (2) tanks. Packs 42k# in (1) fish hold with n...
More Details- Year:
- 1912
- Length:
- 45
- Hull:
- Wood
- Location:
- California
45’x11.3’x4.3’ wood double-ender built in 1912, rigged for crab and salmon. 180hp Detroit 671 main w/ Twin Disc gear. 500 gallon fuel capacity in (2) tanks. (2) fish holds, one aluminum insert w/ lift. Deck equipment includes 16” Junes crab block, davit, bait choppe...
More Details- Length:
- 35
- Hull:
- Fiberglass
- Location:
- California
35’x14’ fiberglass troller located in Morro Bay, CA. INCLUDES CA AND OR SALMON TROLL PERMITS. Cummins 855 main engine rated at 500 hp. Twin Disc 509 gear with 2:1 ratio. Pack 4k# in (1) insulated fish hold. Spray brine system. Includes salmon gurdies, trolling gea...
More Details- Year:
- 1966
- Length:
- 50
- Hull:
- Steel
- Builder:
- James Murphy
- Location:
- California
50’x14.5’x8’ steel troller/crabber built in 1966 by James Murphy. Detroit 671 main engine. Capitol gear with 3:1 ratio. 2500 gallons fuel capacity. Makes 7 knots. Nissan 27 kW and Hydropower 5 kW gensets. Packs 24,000# salmon, crab insert holds 7k#. Copela...
More Details- Year:
- 1975
- Length:
- 50
- Hull:
- Fiberglass
- Builder:
- Uniflite
- Location:
- Oregon
50’x15’x6.5’ fiberglass troller built in 1975 by Uniflite. Cat 3116T main engine rated at 300 hp. Twin Disc 5061 gear with 3:1 ratio. Cruises at 8 knots. Onan 7 kw gen set. 20,000# capacity. Deck equipment includes hayrack, (2) tuna pullers and (2) 3-spool salmon g...
More Details- Year:
- 1979
- Length:
- 55
- Hull:
- Steel
- Builder:
- Giddings/Warren
- Location:
- Oregon
55’x16.6’x6.2’ steel combination vessel package, built by Giddings in 1976. 550 hp Cummins NTA-855M main w/ Twin Disc 514 gear. 30kW Isuzu genset, new in 2015. (3) hydraulic pumps. Packs 50,000# in insulated fish hold. Spray brine RSW system w/ 12-ton Carrier compr...
More Details- Year:
- 1976
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Tanaboat Enterprises Ltd.
- Location:
- Canada
32’x12’ aluminum shrimper built by Tanaboat Enteprises Ltd. in Vancouver, BC, in 1976. Twin Volvo TAMD60 main engines rated at 255 hp. Twin Disc 506 gears with 2.5:1 ratio. Makes 11 knots. 420 gallons fuel capacity in (2) tanks. Yanmar gen set for freezer. Gear in...
More Details