- Year:
- 1917
- Length:
- 56
- Hull:
- Wood
- Builder:
- Barbare Bros.
- Location:
- Alaska
56’x14.7’x6.1’ wood seiner built by Babare Bros in 1917, with extensive rebuilds and aluminum tophouse. 375 hp John Deere 6081 w/ Twin Disc 514 gear. 27kw Isuzu MER genset, new in 2012. (2) Vickers 60/40 and 40 run off Twin Disc PTO. Packs 50,000 lbs in tanked & ins...
More Details- Year:
- 1981
- Length:
- 56
- Hull:
- Steel
- Location:
- Washington
56’x16’x7’ steel purse seiner, Monk design, built in 1982. Detroit 871 rated at 350 hp w/ 4850 hrs on the rebuild. Perkins auxiliary runs hydraulic RSW system. Packs 75k lbs in (2) insulated fish holds. RSW w/ 18 ton compressor. Marco power block w/ gripper, deck w...
More Details- Year:
- 2016
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Strongback
- Location:
- Alaska
32’x14.5’x1.5’ aluminum Bristol Bay jet boat built in 2016 by Strongback. John Deere 6090 main engine rated at 550 hp. ZF gear and 18” Hill Hi431 jet. Makes 21 knots light, 14 w/water. 8” bow thruster. (2) Eaton 4 cu pumps. Packs 10k# in (8) fish holds. IMS 7.5 to...
More Details- Year:
- 1979
- Length:
- 66
- Hull:
- Steel
- Builder:
- Howard Maki
- Location:
- Alaska
66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. Twin John Deere gen sets, 65 kW and 45 kW, recently installed. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 26-ton...
More Details- Year:
- 1970
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- Rohd
- Location:
- California
39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furuno radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California...
More Details- Year:
- 1969
- Length:
- 104
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...
More Details- Year:
- 2018
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- LaConner
- Location:
- Alaska
39’x14’x5.5’ LaConner fiberglass sternpicker/crabber built in 2018. Volvo Penta D13 main engine rated at 600 hp. Twin Disc MGX5126A gear with 2.5:1 ratio. Makes 10 knots. 8” bow thruster. Packs 17k# salmon in (7) insulated holds. IMS 5 ton RSW system. Deck equipm...
More Details- Year:
- 1979
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Formosa
- Location:
- California
40’x14’x3.5’ fiberglass troller also rigged for black cod, built in 1979 by Formosa Boat Building. 160 hp Perkins main w/ Twin Disc 373 gear. Lugger w/ 20 kw Northern Lights genset. Fish hold packs 8,000 lbs. Deck equipment includes set of 3-spool gurdies, longline...
More Details- Year:
- 1975
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Alaska
45’x13.5x9.5’ fiberglass Sunnfjord freezer-troller built in 1975, also rigged for longline and spot prawns. John Deere 6068 main rated at 225 hp w/ Twin Disc 506 gear. Isuzu 30kw genset. Fuel capacity of 1,250 gallons in (4) tanks. Fish hold packs 8,000 lbs frozen p...
More Details- Year:
- 1979
- Length:
- 34
- Hull:
- Fiberglass
- Builder:
- Marben
- Location:
- Alaska
36’x11.5’x6.5’ fiberglass sternpicker built by Marben in 1979. John Deere main engine rated at 200 hp. 400 gallons fuel capacity. Packs 10k# in (3) insulated fish holds. IMS 7.5 ton RSW system. Deck equipment includes Kolstrand reel w/levelwind and power roller. E...
More Details- Year:
- 1983
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x12.5’x2.5’ aluminum Bristol Bay boat built in 1983 by Shore. Volvo TAMD 63L main engine rated at 320 hp. Makes 10 knots. Burns 2-3 gph. Packs 12k# in (8) fish holds, (4) insulated. 3 ton Sea Cool RSW system. Berths for (4) Kinematics drum and power roller. Ele...
More Details- Year:
- 1999
- Length:
- 85
- Hull:
- Steel
- Builder:
- Fred Wahl
- Location:
- Oregon
85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....
More Details- Year:
- 1979
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Bruno and Stillman
- Location:
- Alaska
42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...
More Details- Year:
- 1970
- Length:
- 29
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Alaska
29’x10.5’x2.5’ fiberglass Bristol Bay boat built in 1970 by Rawson. Cummins 6BTA main engine rated at 260 hp. ZF220 gear. Makes 7.5 knots at 1.5 gph. Packs 6,500# in (9) insulated fish holds. IMS 7.5 ton hydraulic drive RSW, rebuilt in 2021. (2) Eaton 3.8 cu pumps...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Bannon/Alfa
- Location:
- Alaska
32’x12.7’x3’ aluminum Bristol Bay boat built by Bannon in 1980 and completely rebuilt by ALFA in 2014. Cat 3196 main engine rated at 660 hp w/ approx 2700 hrs on rebuild. Twin Disc 6114 reduction gear. Makes 18 knots. Packs 12k lbs in (8) insulated fish holds. Rebu...
More Details- Year:
- 1985
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Alaska
32’x13’x3’ jumbo Rawson, flush deck, RSW, Bristol Bay gillnetter built in 1985. Caterpillar 3208 main engine rated at 325 hp. Makes 12 knots. Packs 10k# in (9) fish holds, (5) insulated. 7.5 ton Pac West chill-down system. Deck equipment includes Kinematics drum w/...
More Details- Year:
- 1955
- Length:
- 95
- Hull:
- Steel
- Builder:
- USCG
- Location:
- California
95’x19’x6.5’ steel Coast Guard vessel, currently used for training and educational purposes. Originally built for the USCG in 1955. Twin screw with propulsion from (2) Cummins VT12 main engines rated at 550 hp. (1) additional Cummins VT12 backup main engine. Capitol g...
More Details- Year:
- 1985
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Marco in 1985. Caterpillar 3208T rated at 260 hp. Twin Disc gear. Bow thruster. Packs 11.5k# in (8) fish holds with plumbed removable liners. IMS 7.5 ton RSW system, rebuilt in 2022. (4) berth...
More Details- Year:
- 1979
- Length:
- 29
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Oregon
29.4’x12.3’ fiberglass crabber built by Modutech in 1979. Cat 3208 rated at 300 hp. Mitsubishi 19 kW auxillary. Single hold packs 4000 lbs crab. Includes crab block and hydraulic davit. Electronics include multi system display w/ GPS, plotter, radar and sounder. I...
More Details- Year:
- 1983
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Grand Banks
- Location:
- Alaska
42.7’x13’x4.5’ fiberglass pleasure vessel built by Grand Banks in 1983. Twin Ford Lemans each rated at 120 hp. Northern Lights M753G 8kW auxiliary. New batteries 2023. (2) steering stations. Approx 570 gallons fuel combined in (2) tanks. 270 gallons fresh...
More Details- Year:
- 1989
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Raider Aluminum
- Location:
- Washington
34’x11’x2.5’ aluminum landing craft built by Raider Aluminum in 1989.Turbocharged Caterpillar 3116 main engine rated at 300 hp. 10” Hamilton 1031 jet with spare 11.5” Hamilton 292 jet included. Borg Warner Velvet Drive gear. (2) 125 hp Honda VTEC outboards. (2) 90 hp...
More Details- Year:
- 1976
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32'x11.5'x36" aluminum Bristol Bay gillnetter built by Shore in 1976. John Deere 6068 rated at 225 hp w/ Twin Disc 5061 gear. Packs 10k lbs in (8) recently insulated fish holds. IMS 8.5 ton RSW system w/ (2) zones. Sliding drum w/ Twister drive, levelwind and power...
More Details- Year:
- 1988
- Length:
- 43
- Hull:
- Fiberglass
- Builder:
- Cascade
- Location:
- California
43’x12’x6.5’ fiberglass troller built by Cascade in 1988. New Cummins 4.3L rated at 80 hp installed 2022 w/ Warner gear, rebuilt in 2022. One insulated fish hold packs 3,000 lbs. Includes gurdies and misc. salmon and tuna gear. Electronics include Raymarine GPS, rad...
More Details- Year:
- 1984
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Hydraulic Fishing Supply
- Location:
- Alaska
32’x14.5’x28” aluminum, flush deck, RSW, Bristol Bay gillnetter built by Hydraulic Fishing Supply in 1984. Cat 3126 rated at 470 hp w/ approx 3,663 hrs and Twin Disc MG507 gear. Isuzu auxiliary drives PacWest 6.5 ton RSW and 3.5 kW generator. Packs 12k lbs in...
More Details- Year:
- 1964
- Length:
- 84
- Hull:
- Steel
- Builder:
- American Marine
- Location:
- Alaska
84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...
More Details- Year:
- 1980
- Length:
- 40
- Hull:
- Steel
- Location:
- California
40.6’x14.7’x6.6’ steel live bait boat also rigged for squid with lights and brail gear. Cummins QSL9 main rated at 330 hp w/ Twin Disc gear. Northern Lights 30 kW genset. 75 gallon hydraulic system w/ (2) pumps off main. Packs 20-tons in tanked and insulated fish ho...
More Details- Year:
- 1990
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- LaConner
- Location:
- Alaska
32’x14’x38" aluminum, flush deck, RSW Bristol Bay boat built by LaConner in 1990. GMC 6V92 main engine rated at 550 hp, rebuilt in 2016. Twin Disc 5111A gear. 6 cube hydraulics. 20 kW MER gen set. Packs 13,500# in (8) double-walled fish holds. 8.5 ton electric dr...
More Details- Year:
- 1987
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- C&M Marine
- Location:
- Alaska
44’x13’3”x8’8” fiberglass troller built by C&M in 1987. John Deere 6414 main rated at 150 hp w/ Twin Disc 506 gear, both rebuilt in 2019. Fuel capacity of 600 gallons in (2) tanks. Tanked and insulated fish hold packs 15,000 lbs iced, with (2) 2,000 lb slush tanks on...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Workboats Northwest
- Location:
- Alaska
32’x11’x3’ aluminum, RSW, Bristol Bay gillnetter built in 1978 by Workboats NW. Cummins 6BTA rated at 250 hp with Newage gear. IMS 7.5 ton RSW w/ dedicated hydraulics. Packs 10k lbs in (4) newly insulated fish holds. Kinematics deck gear w/ sliding reel. 250 gallon...
More Details- Year:
- 1979
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- West Bay Boat Mfg
- Location:
- Alaska
32’x11.9’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by West Bay Boat Mfg. in 1979. John Deere 6081 rated at 330 hp w/ ZF 285A gear. Refurbished Gen. 1 IMS 7.5 ton RSW w/ new compressor. Packs 11k lbs in (8) recently insulated fish holds. Large picking...
More Details