- Year:
- 1987
- Length:
- 58
- Hull:
- Aluminum
- Builder:
- Shore Boat Works
- Location:
- Washington
57’9”x20.5’x9’ aluminum, combination seine/pot/longliner built by Shore Boat Works (BC) in 1987. Cat D-343 rated at 365 hp rebuilt in 2018, w/ Twin Disc MG518 gear. John Deere 4045 40kW aux new in 2023 and Isuzu 4LE1 18 kW aux rebuilt in 2017. Packs 100k lbs combined...
More Details- Year:
- 1990/2017
- Length:
- 58
- Hull:
- Steel
- Builder:
- Martin Allen Design
- Location:
- Oregon
58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna. Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017. Cummins K19 main rated at 600 hp, new in 2017. Twin Disc gear. 100kW and 65kW...
More Details- Year:
- 1972
- Length:
- 35
- Hull:
- Fiberglass
- Builder:
- Mel Martin
- Location:
- Washington
35’x11.6’x5.9’ fiberglass crabber built by Mel Martin in 1972. Cat 3056D rated at 205 hp with ZF gear both new in 2009. (2) aluminum fuel tanks with 270 gallons capacity. Fully rigged and ready to crab. Packs 10,000 lbs crab. Electronics include GPS, VHF, radar, so...
More Details- Year:
- 1991
- Length:
- 50
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Washington
50’x15.5’x7’ combination fiberglass vesse built by Delta in 1991. Twin Cummins 8.3 main engines rated at 325 hp each, low hours. Twin Disc 507 gears with 1.98:1. Makes 20 knots, 15 knot cruise. 6 kW Lugger auxiliary. 50 GPM Vickers hydraulic pump. Packs 40,000 sal...
More Details- Year:
- 1969
- Length:
- 58
- Hull:
- Steel
- Builder:
- Pete Shires
- Location:
- Alaska
58’x16.8’x8’ steel combination seiner/troller/pot boat, built by Pete Shires in 1969. Rebuilt Detroit 8V92 rated at 450 hp w/ recently rebuilt Twin Disc 514c gear. Recent shaft work w/ new cutlass, dripless, and intermediate bearing. John Deere 4034T 35kW aux. Pack...
More Details- Year:
- 2022
- Length:
- 37
- Hull:
- Fiberglass
- Builder:
- Cuimond Marine/Millenium
- Location:
- Washington
37’x13’x4’ fiberglass crabber, Millenium hull, built by Guimond Marine in 2022. Ad-measured, eligible for US fisheries. Twin Yamaha outboards, 425 hp each, low hours. 23 knot cruise, 40 knots WOT. 300 gallons fuel capacity in (2) tanks. Predator 20 hp generator and...
More Details- Year:
- 1977
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
47’x14’x5’ fiberglass Delta built in 1977 and rigged for crab and troll fisheries. Recently stretched and added aluminum top house. Cummins 855 main rated at 360 hp w/ Twin Disc 509 gear. Northern Lights 12kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Foa...
More Details- Year:
- 1974
- Length:
- 58
- Hull:
- Fiberglass
- Builder:
- Kettenburg
- Location:
- California
58’x20’x8’ fiberglass vessel built by Kettenburg in 1974, and rigged for crab, salmon troll, and tuna. Cummins QS MII main rated at 455 hp. Twin Disc MGX 5114 gear. (2) 65kw John Deere 4045TFM gensets. 50-ton Sea Water RSW system w/ (2) compressors and spray brine s...
More Details- Year:
- 1979
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Radon
- Location:
- California
32’x10’ fiberglass 1979 Radon, rigged for crab with CA 250-pot crab permit with a baseline length of 32’ LOA and CA salmon permit. Cummins CTA 450 hp main. 12 to 14 knot cruise, 18 knot WOT. 300 gallons fuel capacity. 2,000# hold capacity, 3,000# in totes on deck. Compl...
More Details- Year:
- 1979
- Length:
- 50
- Hull:
- Steel
- Builder:
- Randy of Moss Landing
- Location:
- Washington
50’x16.4’x7.6 steel seiner/crabber built in Moss Landing, CA in 1979. John Deere 6090 rated at 330 hp w/ Twin Disc 5114 gear, both new in 2013. Isuzu B4BG1-B w/ 40 kW and new 12 kW gen sets. Packs 42k lbs in insulated fish hold. 30 ton titanium chiller, Carrier comp...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- American Commercial
- Location:
- Oregon
32’x11.4’x5.5’ aluminum gillnetter rigged for crab, built in 1978 by American Commercial. 210 hp CAT 3208 main. Fuel capacity of 200 gallons in (2) tanks. Hydraulic steering w/ (3) stations. (4) insulated fish holds, (2) are tanked. Deck equipment includes crab dav...
More Details- Year:
- 1978
- Length:
- 50
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Oregon
50’x15’x7’ fiberglass craber/troller built in 1978 by Sunnfjord. GMC 671 makes 250 hp, rebuilt in 2019. Twin Disc MG509 gear with 2.8:1 ratio. 30 kW Isuzu 4-cyl gen set. Packs 20k# crab in (1) fish hold. 10-ton RSW system. Accommodations include (2) staterooms wit...
More Details- Year:
- 1971
- Length:
- 50
- Hull:
- Steel
- Builder:
- Yaquina
- Location:
- Oregon
50’x14’x7’ steel crabber/troller built in 1971 by Yaquina. Caterpillar 3208 main engine makes 240 hp. Twin Disc 506 gear with 2.96:1 ratio. 25 kW Isuzu 4-cyl gen set. Packs 10k# in crab insert. Accommodations include v-berth, full galley, and head w/shower. Gear a...
More Details- Year:
- 1946
- Length:
- 40
- Hull:
- Wood
- Location:
- California
40’x12’x4.5’ wood combination vessel rigged for crab, longline, and trolling, built in 1946. Detroit 671 main w/ 11,000 hours on rebuild. Twin Disc 506 gear. Fuel capacity of 300 gal in (2) tanks. 10,000 lbs total hold capacity, 4,500 lbs in aluminum insert crab tan...
More Details- Year:
- 1972
- Length:
- 27
- Hull:
- Fiberglass
- Builder:
- R. Thomas
- Location:
- California
27’5”x10’2” fiberglass crabber/troller built by R. Thomas, Brookings, OR in 1972. Detroit 353 rated at 103 hp, new in 2008. Borg Warner model 71-C reduction gear. Dry fish hold packs 2400# in (8) 300# boxes plus spillage Slush tank insert for salmon. Crab gear incl...
More Details- Year:
- 1979
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- California
38’x12.9’x6’ fiberglass Sunnfjord built in 1979 and rigged for crab, salmon, and open access. John Deere 6068 main rated at 266hp w/ Twin Disc gear. Northern Lights 4kw genset. 500 gallons fuel capacity in (2) tanks. Packs 3,000 lbs below deck, and another 4,000 in...
More Details- Year:
- 1991
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Main Marine
- Location:
- Washington
44’x14’x6’ fiberglass crabber built by Main Marine in 1991. Twin Cummins QSB6.7 mains rated at 425 hp each w/ ZF 301A gears and low hours. Northern Lights 20kw genset. Fuel capacity of 600 gallons in (2) tanks. Cruises at 14 kts. Packs 9,000 lbs crab in (5) tanked...
More Details- Year:
- 1986
- Length:
- 58
- Hull:
- Steel
- Builder:
- Mid Coast Marine
- Location:
- Washington
58’x22’x10’ steel combination vessel built in 1986 by Mid Coast Marine. New Yanmar main rated at 755 hp w/ completely rebuilt Twin Disc 5170 gear. John Deere 4045 65-kW and John Deere 4039 42-kW gensets. Packs 130k lbs salmon in main hold, plus bait freezer. 27 ton...
More Details- Year:
- 1975
- Length:
- 108
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
108’x27’x9’ steel crabber built by Marco in 1975. Vessel sunk and salvaged in 2024. Reported to pack approximately 360k# pinks in 7,500 cu ft. Machinery and electronics are presumed to not be operable. Asking $100,000, make offers. ******Additional Terms******* V...
More Details- Year:
- 1973
- Length:
- 40
- Hull:
- Aluminum
- Builder:
- Elmer W. McEachern
- Location:
- Oregon
40’x11.9’x4.8’ aluminum troller built by Elmer W. McEachern (BC) in 1973. John Deere 6068 rated at 210 hp w/ Twin Disc MG550 gear. Packs 10k lbs in (1) newly fiberglassed and insulated fish hold. Crab insert, davit, picking boom, hay rack, (4) single spool gurdies, p...
More Details- Year:
- 1967
- Length:
- 92
- Hull:
- Steel
- Builder:
- Pac Fish
- Location:
- Washington
92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...
More Details- Year:
- 1974
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
38’x13’ fiberglass gillnet/crab/shrimp vessel built in 1974 by Delta. Volvo TAMD61A main engine rated at 301 hp. Twin Disc MG-509 gear with 2:1 ratio. Burns 5 gph at 7.5 knots. 10 kW Isuzu LB31 gen set. Packs 15k# in (4) insulated fish holds. Deck equipment includ...
More Details- Year:
- 1976
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
42’x13’ fiberglass seiner/crabber built by Delta in 1976, overhauled in 2013-14. John Deere 6090 main engine rated at 330 hp. Twin Disc gear with 2.5:1 ratio. Burns 3.5 gph at 7 knots. 18 kW Mitsubishi gen set. Packs 28k# salmon. IMS 12.5 ton RSW system. Vickers...
More Details- Year:
- 1976
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...
More Details- Year:
- 1976
- Length:
- 37
- Hull:
- Aluminum
- Builder:
- Freeman Marine
- Location:
- Oregon
37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...
More Details- Year:
- 2018
- Length:
- 33
- Hull:
- Aluminum
- Builder:
- ACI
- Location:
- Washington
33’x11’x2’ aluminum crabber built by ACI in 2018. Twin Honda 250hp outboards. Cruises at 22kts and does 40kts WOT. Fuel capacity of 200 gallons in (2) tanks. 13hp power pack w/ 30 gallon hydraulic tank. 15” Junes crab block, hydraulic davit, and dump box. Fish hold...
More Details- Year:
- 1990
- Length:
- 87
- Hull:
- Steel
- Builder:
- Mid Coast Marine
- Location:
- Alaska
87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...
More Details- Year:
- 1978
- Length:
- 167
- Hull:
- Steel
- Builder:
- Maxon Marine Industries, Inc.
- Location:
- Washington
167’x46’x16’ combination catcher/processor vessel built in 1978 by Maxon Industries. Twin Caterpillar 3508 main engines rated at 850 hp each, in-framed 2023. Caterpillar 7261 marine gears with 5.11:1 ratio. (2) 190 kW Caterpillar 3306 and 55 kW Caterpillar gen sets....
More Details- Year:
- 2003
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- H&H Marine
- Location:
- California
32’x11.5’x4.5’ fiberglass lobster boat built by H&H Marine in 2003. Cummins 6BTA turbo diesel rated at 315hp w/ 2,800 hours. ZF reduction gear. 14kt cruise at 2200rpm and 11kt cruise at 2000 rpm. (2) 100gal live-wells below deck w/ (3) water and (2) air quick releas...
More Details- Year:
- 1997
- Length:
- 31
- Hull:
- Fiberglass
- Builder:
- Mel Martin
- Location:
- California
31’x12’x2’ fiberglass Mel Martin crabber built in 1997. Volvo Penta Kad 44 main rated at 260 hp w/ 1100 hours. Outdrive. Does 15 kts. Packs 6,000 lbs in (3) tanked fish holds. Electronics include (2) Garmin 182c GPS/plotters and (2) VHF radios. Also includes 2014...
More Details