Vessels - Crabbers

58’x16.8’x8’ steel combination seiner/troller/pot boat, built by Pete Shires in 1969. Rebuilt Detroit 8V92 rated at 450 hp w/ recently rebuilt Twin Disc 514c gear. Recent shaft work w/ new cutlass, dripless, and intermediate bearing. John Deere 4034T 35kW aux. Pack...

37’x13’x4’ fiberglass crabber, Millenium hull, built by Guimond Marine in 2022. Ad-measured, eligible for US fisheries. Twin Yamaha outboards, 425 hp each, low hours. 23 knot cruise, 40 knots WOT. 300 gallons fuel capacity in (2) tanks. Predator 20 hp generator and...

47’x14’x5’ fiberglass Delta built in 1977 and rigged for crab and troll fisheries. Recently stretched and added aluminum top house. Cummins 855 main rated at 360 hp w/ Twin Disc 509 gear. Northern Lights 12kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Foa...

44’x15’x5’ aluminum crabber built by Edwing in 2006. John Deere 6135SFM85 rated at 650 hp, new in 2021. Rebuilt Twin Disc MG511 reduction gear. Northern Lights 12kW gen set w/ wet exhaust, gen new in 2017. Packs 12k lbs crab in single fish hold. N.W. Propeller 20”...

58’x20’x8’ fiberglass vessel built by Kettenburg in 1974, and rigged for crab, salmon troll, and tuna. Cummins QS MII main rated at 455 hp. Twin Disc MGX 5114 gear. (2) 65kw John Deere 4045TFM gensets. 50-ton Sea Water RSW system w/ (2) compressors and spray brine s...

50’x21.5’x4’ fiberglass over wood combination vessel built in 2005 by William Perry in Canada, currently rigged as squid light boat. CAT C18 main rated at 469 hp, w/ Twin Disc MGX516 gear. 15kw Stamford and 50kw Kubota gensets. Fuel capacity of 2,000 gallons in (6) t...

32’x10’ fiberglass 1979 Radon, rigged for crab with CA 250-pot crab permit with a baseline length of 32’ LOA and CA salmon permit. Cummins CTA 450 hp main. 12 to 14 knot cruise, 18 knot WOT. 300 gallons fuel capacity. 2,000# hold capacity, 3,000# in totes on deck. Compl...

23’ aluminum All-American skiff built in 1992. 90 hp Honda 4-stroke outboard. 13 hp Honda power pack hydros by LFS. Gillnet reel w/levelwind and crab block. Hydraulic steering station. 22 gallon fuel tank with filter. Anchor gear, 12V batteries, and bilge pumps. D...

32’x11.4’x5.5’ aluminum gillnetter rigged for crab, built in 1978 by American Commercial. 210 hp CAT 3208 main. Fuel capacity of 200 gallons in (2) tanks. Hydraulic steering w/ (3) stations. (4) insulated fish holds, (2) are tanked. Deck equipment includes crab dav...

50’x16.4’x7.6 steel seiner/crabber built in Moss Landing, CA in 1979. John Deere 6090 rated at 330 hp w/ Twin Disc 5114 gear, both new in 2013. Isuzu B4BG1-B w/ 40 kW and new 12 kW gen sets. Packs 42k lbs in insulated fish hold. 30 ton titanium chiller, Carrier comp...

50’x15’x7’ fiberglass craber/troller built in 1978 by Sunnfjord. GMC 671 makes 250 hp, rebuilt in 2019. Twin Disc MG509 gear with 2.8:1 ratio. 30 kW Isuzu 4-cyl gen set. Packs 20k# crab in (1) fish hold. 10-ton RSW system. Accommodations include (2) staterooms wit...

50’x14’x7’ steel crabber/troller built in 1971 by Yaquina. Caterpillar 3208 main engine makes 240 hp. Twin Disc 506 gear with 2.96:1 ratio. 25 kW Isuzu 4-cyl gen set. Packs 10k# in crab insert. Accommodations include v-berth, full galley, and head w/shower. Gear a...

40’x12’x4.5’ wood combination vessel rigged for crab, longline, and trolling, built in 1946. Detroit 671 main w/ 11,000 hours on rebuild. Twin Disc 506 gear. Fuel capacity of 300 gal in (2) tanks. 10,000 lbs total hold capacity, 4,500 lbs in aluminum insert crab tan...

58’x17’x7’ fiberglass seiner/crabber built by Pelagic / Westlynn Marine (BC) in 1979. John Deere 6135 rated at 425 hp w/ Twin Disc 504b reduction gear. John Deere 4039 40 kW genset. New cutlass bearing 2023. Packs 115k lbs salmon and 35k lbs crab in (4) insulated, R...

27’5”x10’2” fiberglass crabber/troller built by R. Thomas, Brookings, OR in 1972. Detroit 353 rated at 103 hp, new in 2008. Borg Warner model 71-C reduction gear. Dry fish hold packs 2400# in (8) 300# boxes plus spillage Slush tank insert for salmon. Crab gear incl...

38’x12.9’x6’ fiberglass Sunnfjord built in 1979 and rigged for crab, salmon, and open access. John Deere 6068 main rated at 266hp w/ Twin Disc gear. Northern Lights 4kw genset. 500 gallons fuel capacity in (2) tanks. Packs 3,000 lbs below deck, and another 4,000 in...

31’x10’ fiberglass longliner built by Anderson Custom Boats in 2018. Rigged for live market deliveries. Cummins DR6497-RX rated at 593 hp, installed 2023 w/ wet exhaust. Vee drive ZF286 reduction gear. Hydroslave longline hauler. (2) insulated fish holds w/ aerator...

21.5’x8.5’x3.5’ fiberglass Parker 2120 w/ cuddy cabin, built in 2002. Twin 115hp Yamaha four stroke outboards w/ 1,529 hours. Top speed of 34 mph and burns 9.7 gph. Fuel capacity of 126 gallons in single tank. Electronics include GPS, VHF, radar, autopilot, and Garm...

44’x14’x6’ fiberglass crabber built by Main Marine in 1991. Twin Cummins QSB6.7 mains rated at 425 hp each w/ ZF 301A gears and low hours. Northern Lights 20kw genset. Fuel capacity of 600 gallons in (2) tanks. Cruises at 14 kts. Packs 9,000 lbs crab in (5) tanked...

58’x22’x10’ steel combination vessel built in 1986 by Mid Coast Marine. New Yanmar main rated at 755 hp w/ completely rebuilt Twin Disc 5170 gear. John Deere 4045 65-kW and John Deere 4039 42-kW gensets. Packs 130k lbs salmon in main hold, plus bait freezer. 27 ton...

52’x16.6’x6’ fiberglass crabber/tuna boat built in 1978 by Philbrooks. 240 hp Detroit 871 main w/ Allison gear. Isuzu 4BG1 14kw genset. Fuel capacity of 2,200 gallons in (4) tanks. Fish holds pack 12 tons of blast frozen tuna, and crab tank insert holds 10,000 lbs....

32’x15.5’x36” aluminum, Bristol Bay gillnetter built by North River Boats in 2020.  Cruise at 23 kts, light.  Man i6 rated at 730 hp w/ ZF360A reduction gear and 5-blade SS prop.  Packs 17k lbs below deck in (8) double walled fish holds.  IMS 8.5 ton...

108’x27’x9’ steel crabber built by Marco in 1975. Vessel sunk and salvaged in 2024. Reported to pack approximately 360k# pinks in 7,500 cu ft. Machinery and electronics are presumed to not be operable. Asking $100,000, make offers. ******Additional Terms******* V...

40’x11.9’x4.8’ aluminum troller built by Elmer W. McEachern (BC) in 1973. John Deere 6068 rated at 210 hp w/ Twin Disc MG550 gear. Packs 10k lbs in (1) newly fiberglassed and insulated fish hold. Crab insert, davit, picking boom, hay rack, (4) single spool gurdies, p...

92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...

38’x13’ fiberglass gillnet/crab/shrimp vessel built in 1974 by Delta. Volvo TAMD61A main engine rated at 301 hp. Twin Disc MG-509 gear with 2:1 ratio. Burns 5 gph at 7.5 knots. 10 kW Isuzu LB31 gen set. Packs 15k# in (4) insulated fish holds. Deck equipment includ...

42’x13’ fiberglass seiner/crabber built by Delta in 1976, overhauled in 2013-14. John Deere 6090 main engine rated at 330 hp. Twin Disc gear with 2.5:1 ratio. Burns 3.5 gph at 7 knots. 18 kW Mitsubishi gen set. Packs 28k# salmon. IMS 12.5 ton RSW system. Vickers...

38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...

36’x12’x2’ aluminum, crabber, Monk design, hull built by McQen in 1968. Hull stored inside, under cover until finished in 2018. Makes 32 knots. Recently installed Volvo D6 rated at 370 hp, w/ apprx 1400 hrs. Humbyrd 15” crab block and hydraulic davit. 16 GPH hydrau...

37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...