All Vessels

42’x13’ fiberglass seiner/crabber built by Delta in 1976, overhauled in 2013-14. John Deere 6090 main engine rated at 330 hp. Twin Disc gear with 2.5:1 ratio. Burns 3.5 gph at 7 knots. 18 kW Mitsubishi gen set. Packs 28k# salmon. IMS 12.5 ton RSW system. Vickers...

38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...

37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...

36’x12.5’x3.5’ fiberglass gillnetter built by Roberts in 1970. CAT 3126b main rated at 450. ZF reduction gear, new in 2019. Fuel capacity of 400 gallons in (2) tanks. Packs 10,000 lbs in (5) tanked and insulated fish holds. Deck equipment includes gillnet reel, lev...

32’x11.5’x2.5’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Marco in 1980. 2015 Yanmar 6LY rated at 440 hp w/ ZF360 gear. Makes 14 knots. Bow thruster. IMS 7.5 ton RSW system. Packs 11k lbs in double walled fish holds w/ insulation. Maritime Fab. re...

42’x12.5’ fiberglass troller built in 1979 by SeaMaster. GMC 471 main engine rated at 120 hp. Twin Disc gear with 3.83:1 ratio. Makes 7.5 knots, 1k gallons fuel capacity. Eaton 421 hydraulics. Packs 9500# frozen coho (1) fish hold, plate freezer system. Includes E...

58’x20’x9.5’ steel combination vessel built in Reedsport, OR by Scott Studeman in 1995. John Deere 6135 main rated at 425hp w/ Twin Disc 5114 gear. (2) John Deere 4045 65kw gensets. Fish hold w/ removable partitions packs 33,000 lbs crab w/ aft section as bait freeze...

58’x21’x10.5’ steel seiner package w/ skiff and permits, built in 1992 by Bill Berggren. Cummins KTA-19 main rated at 500 hp w/ Twin Disc reduction gear. Northern Lights 60kw and Northern Lights 30kw gensets. 20-ton RSW system w/ titanium chillers. Pakcs 116,000 lbs...

33’x11’x2’ aluminum crabber built by ACI in 2018. Twin Honda 250hp outboards. Cruises at 22kts and does 40kts WOT. Fuel capacity of 200 gallons in (2) tanks. 13hp power pack w/ 30 gallon hydraulic tank. 15” Junes crab block, hydraulic davit, and dump box. Fish hold...

87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...

32’x11.5’ fiberglass sternpicker built in 1978 by Roberts. Volvo TAMC70D main engine rated at 260 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Packs 9k# in (6) insulated fish holds. Deck equipment includes Maritime Fab drum, levelwind, rower roller, and...

167’x46’x16’ combination catcher/processor vessel built in 1978 by Maxon Industries. Twin Caterpillar 3508 main engines rated at 850 hp each, in-framed 2023. Caterpillar 7261 marine gears with 5.11:1 ratio. (2) 190 kW Caterpillar 3306 and 55 kW Caterpillar gen sets....

32’x11.5’x4.5’ fiberglass lobster boat built by H&H Marine in 2003. Cummins 6BTA turbo diesel rated at 315hp w/ 2,800 hours. ZF reduction gear. 14kt cruise at 2200rpm and 11kt cruise at 2000 rpm. (2) 100gal live-wells below deck w/ (3) water and (2) air quick releas...

52.7’x15’x7’ wood seiner built in 1929. Detroit 8V71 main w/ Twin Disc 509 reduction gear. Kubota 28kw genset. Fuel capacity of 450 gallons in (2) tanks. IMS 18-ton RSW system. Fish hold packs 40,000 lbs. Deck equipment includes Kolstrand deck winch, Vitek power b...

35.2’x12’x6.4’ fiberglass troller built by Pettis in 1973. Cummins 555 main rated at 255 hp. Fuel capacity of 150 gallons in (2) tanks. Insulated fish hold packs 12,000 lbs in (6) bays. Deck equipment includes 3-spool gurdies, tuna pullers, crab block and hydraulic d...

31’x12’x2’ fiberglass Mel Martin crabber built in 1997. Volvo Penta Kad 44 main rated at 260 hp w/ 1100 hours. Outdrive. Does 15 kts. Packs 6,000 lbs in (3) tanked fish holds. Electronics include (2) Garmin 182c GPS/plotters and (2) VHF radios. Also includes 2014...

58’x18.5’ steel seiner built in 1958. Cummins 855 main engine. Twin Disc MG514 gear with 3:1 ratio. 8.5 knot cruise. PTO w/ Pitts clutch. 40 kW Isuzu 4BD1 gen set. Packs 70k# in (2) fish holds. 20 ton RSW system. Kolstrand deck winch, Marco power block, (2) booms...

34’x12’ aluminum combination vessel built in 1987 by American Welding. Set up for gillnet, crab, longline, and dive fisheries. Isuzu A6BGITQW main engine rated at 180 hp. (3) fish holds, slush ice. Deck equipment includes crab block. longline hauler, gillnet drum, a...

134’x32’ steel landing craft built by Lantana Boatyard Inc in 1978. Current COI for (16) plus crew, freight, oil response and oceanographic research. Cruises at 10 knots. Draws 4’ light and 7’ loaded. 14.5’ wide ramp w/ 72’x31’ cargo deck. (2) updated Cat C-18 mains...

84’x20’x12’ wood gillnet tender / charter vessel, built by Johnson Brothers for the US Bureau of Fisheries in 1928. Completely rigged for tendering but also set up for chartering with (3) passenger staterooms, plus crew quarters, (2) heads w/ showers, large comfortable...

36’X13’ Aluminum crabber built by Velocity Marine in 2022, like new. Twin Suzuki 350 Dual prop outboards rated at 350 hp each. 850 hrs. 18 knot cruise, 35 knots top speed. MER 22Kw gen set Model MGM-KNI three-phase gen set with front mounted with Pitts clutch. 300 ga...

36’x11.6’x4.4’ fiberglass troller built in 1977 by Deltage Boats LTD, British Columbia. CAT 3106 main rated at 210 hp w/ Twin Disc 506 gear. Fuel capacity of 450 gallons in (4) tanks. (2) insulated fish holds pack 9,500 lbs. Deck equipment includes aluminum A-frame...

44’x12’x6’ wood troller/crabber built in 1942 by Jacobson Shipyard in Tacoma, WA. Detroit 671 main w/ 7,408 hours and “crash box” reduction gear. 9kw Northern Lights genset. 14-ton fish hold w/ 6,000 lb crab tank insert. (2) Kolstrand 3-spool gurdies, aluminum outri...

42’x14’x5’ aluminum stern picker built in 1992 by American Eagle Mfg in LaConnor, WA. Twin Volvo TAMD 71B each rated at 380 hp, port side main rebuilt in 2019. Includes total rebuild kit. ZF reduction gears. Packs 20k lbs in (3) insulated holds w/ bins. (2) 6 cu. R...

39’x11.5’x5.2’ wood troller built by Peter Smith (BC) in 1986. Isuzu 6BG1 rated at 140 hp, new in 2015. PRM 401 gear. Aluminum A-frame and (2) 3-spool Simplex Gurdies. Packs approx. 10k lbs in single insulated fish hold. Electronics include (2) GPS, (2) VHF, Furuno...

44.9’x14’x7.8’ steel combination vessel rigged for crab, salmon, tuna, black cod, and built in 1966. Detroit 671 main rated at 210 hp, rebuilt in 2021. Twin Disc 509 reduction gear. Isuzu 21kw genset. Fish hold insert packs 8,500 lbs crab. Blast freeze system w/ 10...

153’x42’x12.5’ processor, originally built as freezer longliner in 1978 by Sea-Tac Marine. Rebuild done in 1992 by Lake Union Drydock. Built to loadline specifications. Twin Caterpillar 399 mains rated at 1,125 hp each. (2) 400 kW Caterpillar 3412, (1)190 kW Caterpill...

31’x11’ fiberglass, potentially rigged to crab, gillnet and dive. Great multi-use vessel for the Puget Sound. Built by Neptune Boats in 2024. Volvo D6 rated 350 hp w/ apprx 3400 hrs and Volvo dual prop outdrive. Reported to make 42 MPH.  Aluminum phone booth st...

72’x21’x12’ steel longliner built in 1968 by Berg. Originally built as a Dungeness crabber, has tendered. Caterpillar 3412 main engine rated at 510 hp. Twin Disc MG-5202 gear with 5.04:1 ratio. 145 kW Caterpillar C6.6 gen set and 80 kW John Deere 4045 w/ new Norther...

39’x12’x3.5’ fiberglass gillnetter build by Northwind Boats in 1972. Volvo TAMD main rated at 300 hp w/ low hours on rebuild. Capitol Marine reduction gear. Fuel capacity of 300 gallons in (2) tanks. Packs 8,000 lbs in (8) insulated fish holds (1,000 lbs each). Dec...