TR20-012

$40,000
Year:
1970
Length:
28.7
Hull:
Fiberglass
Builder:
C&M Manufacturing
Location:
California

TR20-012

28.6’x9’x3’ fiberglass cruiser rigged for crab and trolling, built by C&M Manufacturing in 1970. Cummins 6BTA main rated at 210 hp w/ 1,700 hrs. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and...

More Details

TR20-011

$122,000
Year:
1976
Length:
42
Hull:
Fiberglass
Builder:
Vega Marine
Location:
Alaska

TR20-011

41’x13.2’x5.9’ Vega Marine troller built in 1976. Detroit 8V-71 main rated at 310 hp rebuilt in 2015 w/ Detroit Allison reduction gear. 9 kw Northern Lights genset. RSW deck tank. Rebuilt Simplex gurdies, slide out davits, hayrack, crab block and updated poles. Elec...

More Details

BB20-019

$45,000
Year:
1982
Length:
32
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

BB20-019

32’x12’x3’ aluminum Bristol Bay boat built in 1982 by Shore. Chevrolet 454 hp main engine. Borg Warner gear with 2.5:1 ratio. Makes (12) knots. Packs 16k# in (8) fish holds. VHF, GPS, sounder, plotter, and inverter. Asking $45,000.

More Details

CR20-012

$875,000
Year:
1969
Length:
48
Hull:
Fiberglass
Builder:
Westport
Location:
Oregon

CR20-012

48’x14’x5’ fiberglass crabber built by Westport in 1969. John Deere 6076 main rated at 310 hp, w/ approx 3,300 hrs. Twin Disc 509 gear. Noerthern Lights 6 kw genset w/ 8,000 hrs. New stainless rudder, prop, and shaft. (3) fish holds, but packs 4,200 lbs crab in alu...

More Details

BB15-021

$35,000
Year:
1980
Length:
32
Hull:
Aluminum
Builder:
American Commercial
Location:
Alaska

BB15-021

32’x11.2’x36” Bristol Bay sternpicker built in 1980 by American Commercial. 8.2 Detroit main engine rated at 190 hp. ZF gear with 2:1 ratio. 10,000 pounds capacity in (10) insulated holds. Plumbed for RSW. Sliding reel, auto levelwind, Kinematics power roller and t...

More Details

CO20-011

$1,350,000
Year:
1974
Length:
93
Hull:
Steel
Builder:
Marine Power and Equipment
Location:
Alaska

CO20-011

93’x31’ steel combination vessel built in 1974 by Marine Power and Equipment. Lengthened and sponsoned at Duwamish Shipyard in 1991, new wheelhouse by Snow and Co. in 2019. GMC main rated at 940 hp. Twin Disc gear with 6:1 ratio. 232 kW Detroit 50 Series and 125 kW...

More Details

BB20-015

$10,000
Year:
1969
Length:
30
Hull:
Wood
Builder:
Bryant
Location:
Alaska

BB20-015

30’x10’ wood, Bristol Bay gillnetter built in 1969. GMC rated at 200 hp. Aluminum articulating net reel, hydraulic stern roller and anchor winch. Packs 8,000 pounds in (6) fish holds. (4) perths. Includes 300 fathoms of gear. Located in Naknek. Asking $10,000.

More Details

LC20-002

$225,000
Year:
1943
Length:
76.5
Hull:
Steel
Builder:
unknown
Location:
Alaska

LC20-002

76.5’x22’x5’ steel combination LC/tender vessel, originally built in 1943, rebuilt in 1985 and completely reconditioned in 2010. 50’x20’ deck space w/ 16’ drop gate. (2) CAT C9 mains each rated at 502 hp w/ ZF gears. New exhaust for all (5) engines in 2019. Plumbed...

More Details

BB20-011

$60,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

BB20-011

32’x11’8”x36” fiberglass Bristol Bay gillnetter built by Roberts in 1980. Volvo Penta TAMD70E rated at 310 hp w/ 7,000 hrs. Twin Disc gear. All new hydraulics in 2019. Packs 12k lbs in (6) insulated fish holds, plumbed for RSW. Articulating aluminum reel w/ Kem dri...

More Details

TR20-005

$160,000
Year:
1973
Length:
38
Hull:
Fiberglass
Builder:
Thermodyne
Location:
Alaska

TR20-005

38’x13.3’x7’ fiberglass power troller built by Thermodyne in 1973. Volvo MD70B main rated at 120 hp w/ Twin Disc 506 reduction gear. Fuel capacity of 375 gallons in (2) tanks. Insulated semi-tote fish hold packs 4,000 iced product. Fully rigged with all troll gear f...

More Details

BB20-009

$115,000
Year:
1980
Length:
32
Hull:
Aluminum
Builder:
Hydraulic Fishing Supply
Location:
Alaska

BB20-009

32’x12.5’ aluminum Bristol Bay gillnetter built by Hydraulic Fishing Supply in 1980. Cummins 6BTA rated at 250 hp w/ Newage Covington reduction gear. New exhaust, from the manifold up, to be installed. Maritime Fab stern roller, aluminum reel w/ Twister drive. 500 g...

More Details

TE20-003

$575,000
Year:
1981
Length:
110
Hull:
Steel
Builder:
Collier Shipbuilding, Inc.
Location:
Alaska

TE20-003

110’x26’x7.5’ steel supply vessel built in 1981 by Collier Shipbuilding. Twin Detroit 16V-71 mains rated at 478 hp ea, w/ Twin Disc 518 gears. Makes 11 knots. (2) 40kw Detroit 471 gensets. Fuel capacity of 25,000 gallons. Draws 7.5 loaded, 5’ light. 70’x24’ flush...

More Details

TE20-002

$625,000
Year:
1992
Length:
98
Hull:
Fiberglass
Builder:
Master Marine, Inc.
Location:
Washington

TE20-002

98’x27.5’x12’ fiberglass combination tender/dragger built by Master Marine, Inc in 1992. Cat 3512 rated at 1750 hp w/ top end rebuild in 2017.  New Reintjes reduction gear, installed 2022. Cat 3408 300 kW and Cat 3306 150 kW gensets. Packs 300k lbs total in...

More Details

RS20-001

$2,000,000
Year:
1990
Length:
186
Hull:
Steel
Builder:
McDermott Shipyards
Location:
Washington

RS20-001

186’x40’ steel oceanographic research/utility vessel built in 1990 by McDermott Shipyards. Cummins KTA50M main engine rated at 1,250 hp. Reintjes gear with 7.053:1 ratio. Ulstein azumith stern drives, 300 hp each, with 3:1 ratio. Bow thruster. (3) Cummins VTA 600 k...

More Details

TR15-002

$75,000
Year:
1970
Length:
36
Hull:
Fiberglass
Builder:
Albion
Location:
Alaska

TR15-002

36’x10.5’x5’ fiberglass troller/longliner, built in 1970 by Albion. Volvo MD70 rated at 120 hp, Capitol reduction gear. New Nidacore deck and rebuilt fish holds. Packs 12k lbs in (9) insulated fish holds. New sliding longline reel built by Precision Boatworks. Alumi...

More Details

SP20-003

$95,000
Year:
1976
Length:
37
Hull:
Fiberglass
Builder:
Ferrell
Location:
Alaska

SP20-003

37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...

More Details

SP19-014

$62,500
Year:
1977
Length:
36
Hull:
Fiberglass
Builder:
Okabi
Location:
Alaska

SP19-014

36’x11’x4’ fiberglass sternpicker/dive boat built by Okabi Boat Work, in B.C., in 1977. Cummins 6BTA 5.9L rated at 210 hp. Borge Warner Velvet drive reduction gear. Rebuilt deck, cabin, and fish holds. (3) Insulated fish holds pack 10k lbs. Kem gear net reel, power...

More Details

DR19-010

$500,000
Year:
1979
Length:
124
Hull:
Steel
Builder:
Marine Industries Northwest
Location:
Washington

DR19-010

124’x32’x11’ factory trawler built in 1979 by Marine Industries Northwest. Man B&W Alpha model 10V23LU main engine rated at 1,450 hp. Alpha reduction gear. Twin 250 kW Cat 3406 B gensets. Fully operational factory. Approximately 190mt capacity for finished, frozen...

More Details

SP19-013

$135,000
Year:
1987
Length:
36
Hull:
Fiberglass
Builder:
Frostad
Location:
British Columbia

SP19-013

36’x12.5’x7’ fiberglass gillnetter built by Frostad in 1987. Canadian vessel, no ad-measurement, but only 6 net tons. Volvo MD71 main rated at 357 hp, w/ Twin Disc 507 gear. Fuel capacity of 400 gallons in (4) tanks. Packs approx. 12,000# in (4) tanked/insulated hol...

More Details

SP19-011

$80,000
Year:
1983
Length:
38
Hull:
Fiberglass
Builder:
Kachemak Marine
Location:
Alaska

SP19-011

38’x11.2’x6.9’ fiberglass sternpicker built by Kachemak Marine in 1983. Cat 3208TA rated at 425 hp w/ rebuilt Twin Disc 507 gear. Packs 20k lbs in (4) updated and insulated fish holds. Kem Marine sliding reel, Kinematic levelwind and stern roller. Vickers single st...

More Details

CR19-036

$90,000
Year:
1984
Length:
32
Hull:
Aluminum
Builder:
La Conner
Location:
Alaska

CR19-036

32’x14’x3’ aluminum crabber/longliner combination vessel built by La Conner in 1984. Twin Cummins 6BTA main engines rated at 315 hp each. ZF 2-20 AS gears. Yamaha EF2600 110v portable generator. Deck equipment includes Maritime Fab roller, longline reel with level...

More Details

LL19-020

$650,000
Year:
1974
Length:
52
Hull:
Fiberglass
Builder:
Little Hoquiam
Location:
Alaska

LL19-020

52’x16’x9’ fiberglass combination longliner/freezer troller, built by Little Hoquiam in 1974. GMC 8v71 main rated at 320 hp, w/ Twin Disc 509 gear. Isuzu 23 kW genset. Fuel capacity of 1,500 gallons in (4) tanks. Blast freeze system w/ 15 ton compressor, electric dr...

More Details

DR19-009

$275,000
Year:
1976
Length:
63
Hull:
Steel
Builder:
Mike Brown
Location:
Oregon

DR19-009

63’x17.7’x8’ steel combination vessel, rigged for bottom trawling, built by Mike Brown in Port Hueneme, CA. Isuzu UM6WG main rated at 505 hp and Twin Disc 514 gear. PTO drives (2) 60 gpm pumps. John Deere 40 kW genset w/ Vickers 20 gpm pump. Packs 70,000# iced groun...

More Details

CO19-021

$200,000
Year:
1972
Length:
51
Hull:
Fiberglass
Builder:
Pelagic Industries
Location:
British Columbia

CO19-021

51’x15’x8’ fiberglass combination vessel built in 1972 by Pelagic Industries. Gardner 8LXEB main engine rated at 167 hp. Twin Disc 509 gear with 2.91:1 ratio. Perkins 4108 genset. Appx 1,000 gallons fuel capacity in (1) tank. Packs 90k# in (3) holds. Pullmaster...

More Details

TE19-008

$565,000
Year:
1980
Length:
59.5
Hull:
Fiberglass
Builder:
Frostad
Location:
Alaska

TE19-008

59.5’x18’x11’ fiberglass longliner/tender. Built in 1980 by Frostad in Vancouver, BC. Cummins KTA1150 450 hp main engine rated at 450 hp. Twin Disk 503 gear with 4.5:1 ratio. 5.5 kW Yanmar genset. Packs 150,000k# in (2) holds. 20 ton RSW unit, not plumbed. Deck...

More Details

PK19-008

$200,000
Year:
1952
Length:
40
Hull:
Wood
Builder:
Hansen
Location:
California

PK19-008

40'x10'x7' double-skinned wood troller/crabber built by Hansen in 1952. GMC 371 main engine rated at 140 hp. Twin Disc 509 marine gear. Packs 3,000# crab in tank, 5,000# deckloaded. Chilled water salmon tank holds 3,000#. Deck equipment includes a 17" Warren Junes...

More Details

TR19-011

$200,000
Year:
1952
Length:
40
Hull:
Wood
Builder:
Hansen
Location:
California

TR19-011

40'x10'x7' double-skinned wood troller/crabber built by Hansen in 1952. GMC 371 main engine rated at 140 hp. Twin Disc 509 marine gear. Packs 3,000# crab in tank, 5,000# deckloaded. Chilled water salmon tank holds 3,000#. Deck equipment includes a 17" Warren Junes...

More Details

BG19-001

$85,000
Year:
1945
Length:
80
Hull:
Steel
Builder:
Unknown
Location:
Alaska

BG19-001

80'x33'x6' steel hauling barge located in Bristol Bay. Draws 4’. 6” hydraulic snubber/lift. Steel house on deck, 11'x9', with steel sheeting, 2'x6' sea door. Lister 2-cyl diesel, Lima 4kW AC generator, Northern hydraulic pump. Tie-downs for bouys, deck can be enclo...

More Details

SP19-002

$135,000
Year:
1970
Length:
39.5
Hull:
Fiberglass
Builder:
Westport
Location:
Alaska

SP19-002

39.5’x12.5’x3.7’ fiberglass sternpicker/troller built by Westport in 1970. Recently installed factory remanufactured Cat 3208NA rated at 215 hp. Twin Disc 506 reduction gear w/ 3:1 ratio. Stretch and composite aft-deck work by Sunfjord. Packs 10k lbs in (6) insulat...

More Details

DR19-002

$200,000
Year:
1976
Length:
71
Hull:
Steel
Builder:
Deep Sea Boat Builders
Location:
California

DR19-002

71’x21’x11’ steel trawler, built 1976 in Bayou La Batre, Alabama. CAT 3408 main rated at 360 hp, w/ Twin Disc reduction gear. Fish hold packs 164,000#. Deck equipment includes (2) hydraulic winches, (2) spare winches, net reel, (4) pairs of doors, and (5) nets rangin...

More Details

Sign up for email updates