DR19-009

$450,000
Year:
1976
Length:
63
Hull:
Steel
Builder:
Mike Brown
Location:
Oregon

DR19-009

63’x17.7’x8’ steel combination vessel, rigged for bottom trawling, built by Mike Brown in Port Hueneme, CA. Isuzu UM6WG main rated at 505 hp and Twin Disc 514 gear. PTO drives (2) 60 gpm pumps. John Deere 40 kW genset w/ Vickers 20 gpm pump. Packs 70,000# iced groun...

More Details

CO19-023

$740,000
Year:
1983
Length:
56
Hull:
Steel
Builder:
Frank James
Location:
Alaska

CO19-023

56’x19’x8’ steel combination vessel built in 1983 by Frank James. Cummins QSL9 main engine rated at 440 hp. Twin Disc 509 gear with 4:1 ratio. Northern Lights 10 kW and Cummins 40 kW gensets. Packs 66k# in (2) fish holds. 15 ton RSW system. Aluminum bait house, li...

More Details

SP19-009

$175,000
Year:
1992
Length:
35
Hull:
Fiberglass
Builder:
Carlson
Location:
Alaska

SP19-009

35’x13’x5.5’ fiberglass, flush deck, gillnetter built by Carlson in 1992. Cat 3208TA rated at 435 hp w/ Twin Disc gear w/ 3.5:1 ratio. Bowthruster. Recent upgrades include new deck, cabin roof, fish holds w/ 4” of foam, fuel tanks, aluminum railings, wash down pump a...

More Details

CR14-009

$125,500
Year:
2004
Length:
32
Hull:
Aluminum
Builder:
Western Fabrication
Location:
Washington

CR14-009

32’x10’x3’ combination crab/longline/tuna vessel built in 2004 by Western Fabrication. Volvo Penta D4 main rated at 225 hp with low hours. Duoprop outdrive recently serviced. Honda 9.9 trolling motor. 120 gallon fuel capacity. Tuna poles, longline chute, crab block...

More Details

CO19-022

$450,000
Year:
1997
Length:
40
Hull:
Aluminum
Builder:
Curry
Location:
Alaska

CO19-022

40’x14’x6’ aluminum combination crab/gillnet/charter/research boat built by Curry/Petrazelka in 2007. Twin Volvo D-6 350 hp diesels w/ outdrives. Cruise at 22 kts and 32 kts top speed. Westerbeke 7.6 kw auxiliary. Twin Vickers 20 GPM hydraulic pumps w/ clutch. Warr...

More Details

CO19-021

$240,000
Year:
1972
Length:
51
Hull:
Fiberglass
Builder:
Pelagic Industries
Location:
British Columbia

CO19-021

51’x15’x8’ fiberglass combination vessel built in 1972 by Pelagic Industries. Gardner 8LXEB main engine rated at 167 hp. Twin Disc 509 gear with 2.91:1 ratio. Perkins 4108 genset. Appx 1,000 gallons fuel capacity in (1) tank. Packs 90k# in (3) holds. Pullmaster wi...

More Details

CR19-028

$899,000
Year:
1977/2012
Length:
52
Hull:
Steel
Builder:
unknown
Location:
California

CR19-028

52’x24’x7.3’ steel combination vessel, built in 1977, then sponsoned and significantly upgraded in 2012.  Big Cam Cummins 855 main, rated at 350 hp.  Twin Disc 309 gear.  Isuzu 30 kW genset.  Fuel capacity of 3,600 gallons in (4) tanks.  Fish ho...

More Details

DR19-007

$775,000
Year:
1976
Length:
52
Hull:
Fiberglass
Builder:
Little Hoquiam
Location:
Oregon

DR19-007

52’x15.8’x8’ fiberglass Little Hoquiam rigged to trawl, built in 1976.  CAT 3406 main rated at 390 hp, w/ 7,200 hrs on rebuild.  Twin Disc 514.  GMC 271 and Isuzu gensets, each 20 kW.  Twin 48 gpm hydraulic pumps.  Packs 30,000# in front hold, a...

More Details

CO19-019

$2,200,000
Year:
1990/2017
Length:
58
Hull:
Steel
Builder:
Martin Allen Design
Location:
Oregon

CO19-019

58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna.  Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017.  Cummins K19 main rated at 600 hp, new in 2017.  Twin Disc gear.  100kW and 65kW...

More Details

SE19-008

$690,000
Year:
1974
Length:
58
Hull:
Steel
Builder:
Marine Power & Equipment
Location:
Alaska

SE19-008

58’x17.7’x9.5’ steel combination seiner/crabber built by Marine Power & Equipment in 1974. Cummins KTA 19-M3 rated at 500 hp w/ Twin Disc MG516 w/ 4.5:1 ratio. Isuzu 60kw and Lugger 20kw gensets. Packs 100k lbs total in (2) insulated fish holds. IMS 25 ton RSW syste...

More Details

SE19-009

$250,000
Year:
1979
Length:
40
Hull:
Fiberglass
Builder:
Beck
Location:
Alaska

SE19-009

40’x14’ fiberglass seiner built by Beck in 1979.  GMC 692 main engine rated at 260 hp.  Twin Disc MG-507 gear with 2:1 ratio.  Makes 10 knots.  Packs 23,000#.  IMS 7.5 ton RSW unit, completely overhauled in 2018.  Deck equipment includes Ko...

More Details

CO19-017

$45,000
Year:
1979
Length:
35
Hull:
Fiberglass
Builder:
Permaglass
Location:
Alaska

CO19-017

35'5"x12' fiberglass troller/longliner built by Permaglass in 1979. Volvo MD70B rated at 120 hp w/ approx 1000 hrs on the rebuild. Twin Disc 506 gear w/ 2.91:1 ratio. Packs 10k lbs in (1) fish hold, w/ (6) compartments. Warren Junes 15" SS hauler, aluminum boom and...

More Details

TN19-014

$295,000
Year:
2003
Length:
46
Hull:
Fiberglass
Builder:
Glass Works
Location:
Hawaii

TN19-014

46'x14'x4' fiberglass tuna vessel built in 2003 by Glass Works. Cat C12 main engine rated at 700 hp, low hours. ZF gear with 2.2:1 ratio. 20 kVA Northern Lights gen set. Packs 6,500# in insulated fish holds. Accommodations for (3) with air conditioning. Equipment...

More Details

CO18-029

$2,000,000
Year:
1980
Length:
72
Hull:
Steel
Builder:
Duke's Welding
Location:
Oregon

CO18-029

72'x22'x10' steel combination vessel. Monk-design, built by Duke's Welding in 1980. Currently set up as a crabber/shrimper. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW Isuzu g...

More Details

DR19-003

$595,000
Year:
1979
Length:
55
Hull:
Steel
Builder:
Giddings/Warren
Location:
Oregon

DR19-003

55’x16.6’x6.2’ steel combination vessel package, including permits for OR shrimp, OR salmon, and 500 pot OR crab (65’). Built by Giddings in 1976. Cummins NTA-855M main w/ Twin Disc 514 gear. 30kW Isuzu genset, new in 2015. (3) hydraulic pumps. Packs 40,000# in ins...

More Details

CO19-012

$145,000
Year:
1974
Length:
43
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

CO19-012

43’x13’x3’ fiberglass combination vessel built by Delta/LeClerq in 1974. Volvo Penta TMD 70D main engine rated at 220 hp. Twin Disc 506 gear with 2:1 ratio. Packs 28,000# in (3) holds. 15 ton Highland RSW system. 21 kW Mitsubishi genset. (4) stations hynautics. H...

More Details

TE19-006

$1,050,000
Year:
1969
Length:
104
Hull:
Steel
Builder:
Marco
Location:
Washington

TE19-006

104'x25'x12' steel crabber/tender built by Marco in 1969. CAT D348 main engine rated at 750 hp, CAT gear. (2) CAT 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...

More Details

CO19-010

$150,000
Year:
1969
Length:
54
Hull:
Steel
Builder:
Paul Lackey
Location:
Oregon

CO19-010

54'x17' steel combination crab/troll/longliner built by Paul Lackey in 1969. Cummins 855 rated at 300 hp w/ Twin Disc MG509. Isuzu 6BG1T 55 kW genset, new in 2015. Aluminum trolling poles and shelter deck. 19" crab block w/ davit, hydraulic ram, and bait chopper. I...

More Details

CO19-009

$75,000
Year:
1975
Length:
35
Hull:
Aluminum
Builder:
Alumacraft
Location:
British Columbia

CO19-009

35'x10.5'x3' aluminum combination vessel built by Alumacraft in 1975. GMC 653 main rated at 160 hp. Twin Disc 506 gear with 2.5:1 ratio. Packs 11,000# in insulated fish holds. Deck equipment includes crab hauler, crab block, line hauler, and gillnet drum with drum d...

More Details

CO19-005

$2,888,888
Year:
1991
Length:
113
Hull:
Steel
Builder:
Giddings Boat Works
Location:
Alaska

CO19-005

113'x28'x7' steel combination Bering Sea crabber/tender built by Giddings Boat Works in 1991. Twin Cummins QSK-19 each rated at 600 hp and Twin Disc MG516 reduction gears. Iveco w/ 35 kW and (2) Cummins 6CTA w/ 125 kW gensets. (3) refurbished fish holds pack 365k lbs...

More Details

DR19-002

$350,000
Year:
1976
Length:
71
Hull:
Steel
Builder:
Deep Sea Boat Builders
Location:
California

DR19-002

71'x21'x11' steel trawler, built 1976 in Bayou La Batre, Alabama. CAT 3408 main rated at 360 hp, w/ Twin Disc reduction gear. Fish hold packs 164,000#. Deck equipment includes (2) hydraulic winches, (2) spare winches, net reel, (4) pairs of doors, and (5) nets rangin...

More Details

CO19-006

$220,000
Year:
1979
Length:
38
Hull:
Fiberglass
Builder:
Ledford
Location:
Alaska

CO19-006

38'x13' fiberglass combination vessel built in 1979 by Ledford. Currently rigged as a seiner, longliner, and pot vessel. John Deere 6068 main engine rated at 175 hp. Twin Disc 506 gear with 1.97:1 ratio. Packs 25,000# in insulated fishhold. IMS 7.5 ton RSW System....

More Details

CO19-002

$269,000
Year:
1976
Length:
60
Hull:
Steel
Location:
California

CO19-002

60'x22'x6' steel vessel rigged for trawling. Built in 1976. Detroit V871 main engine rated at 300 hp. Twin Disc 514 gear with 4.5:1 ratio. 65 kW Perkins and 20 kW Isuzu gensets. Packs 50,000# tuna, frozen. Blast freeze system. Large drum with levelwind. Accommodati...

More Details

CO18-041

$40,000
Year:
1981
Length:
32
Hull:
Fiberglass
Builder:
Modutech
Location:
Alaska

CO18-041

32'x14'x6' twin-screw fiberglass combination vessel built in 1981 by Modutech. (2) Cat 3208 main engines rated at 260 hp each. Twin Disc marine gears. Packs approximately 4,500# crab, 10,000# halibut in (4) holds. Deck equipment includes a crab block, longline haule...

More Details

TE18-018

$1,400,000
Year:
1980
Length:
98
Hull:
Steel
Builder:
Bender
Location:
Alaska

TE18-018

98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks...

More Details

CR18-045

$2,600,000
Year:
1969
Length:
100
Hull:
Steel
Builder:
Pacific Fishermen Shipyard
Location:
Washington

CR18-045

100'x36'x12.5' steel crabber built by Pacific Fishermen Shipyard in 1969. Cat D348 main engine rated at 750 hp. Twin Disc MG527 gear with ratio of 5.17:1. (2) Cat 3306B 165 kW and (1) Deere 4039D 40 kW gen sets. Packs 200,000# crab, 400,000# salmon. 40 ton RSW syste...

More Details

CR18-042

$180,000
Year:
1985
Length:
43
Hull:
Aluminum
Builder:
US Navy
Location:
Washington

CR18-042

43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen se...

More Details

CO18-031

$550,000
Year:
1996
Length:
46
Hull:
Steel
Builder:
Meyer/Faulk
Location:
Oregon

CO18-031

46'8"x14'x6' steel combination tuna/salmon/crabber built in Nanaimo, B.C. in 1996. Volvo TMD 120A. Twin Disc 514 gear w/ 3.5:1 ratio. Kubota 20kW genset. 10 ton plate freezer. Fiberglass fish hold packs 10 ton albacore, salmon in slush and 10k lbs of crab w/ insert...

More Details

TR18-041

$250,000
Year:
1971
Length:
50
Hull:
Steel
Builder:
Yaquina Boat Works
Location:
Oregon

TR18-041

50'x14'x7' steel troller/crabber built by Yaquina Boat Works in 1971. Remanufactured Cat 3208 main rated at 210 hp w/ new Twin Disc 506 gear installed in 2016. 25 kW Isuzu gen set. Packs 9,000# crab in insert. All wiring overhauled in 2013. Deck equipment includes...

More Details

CR18-030

$595,000
Year:
1981
Length:
52
Hull:
Steel
Builder:
Jack St. Clair
Location:
Oregon

CR18-030

52'x20'x7' steel crabber/longliner/tender built by Jack St. Clair in 1981, and sponsoned in 2008 at Giddings. Cummins 855 main rated at 300 hp. Twin Disc 509 gear w/ PTO and 30 gpm hydraulic pump. 25kW and 30kW Northern Lights gensets. 18 ton IMS RSW system. All ne...

More Details

Sign up for email updates