- Year:
- 2005
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Omak Marine
- Location:
- Alaska
34’x10’x2.5’ aluminum landing craft and Tier-1 oil spill response vessel w/ SERVS, built by Omak Marine in 2005. Twin Suzuki DF200P 4-stroke outboard engines w/ only 325 hours. Dometic trim tab controls. Does 40 kts WOT. 330-gallon fuel tank. Honda hydraulic power...
More Details- Year:
- 1979
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Delta Marine Industries
- Location:
- Washington
42’x13’ fiberglass sternpicker built by Delta Marine Industries in 1979. MAN D2542DTE main engine rated at 550 hp. Twin DIsc MG-5111A gear with 1.92:1 ratio. 450 gallons fuel capacity in (4) tanks. Packs approximately 20k# on (1) fish hold, divided into thirds longi...
More Details- Year:
- 2017
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Strongback Boats
- Location:
- Alaska
32’x13.5’x24” aluminum, single jet, Bristol Bay gillnetter built by Strongback Boats in 2017. Scania Di13 rated at 750 hp w/ ZF 360 reduction gear. Hill Innovations Hi-500, 20”, water jet w/ new stator. Packs 11,500 lbs in (8) double-walled fish holds. PacWest 7.5...
More Details- Year:
- 1982
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Little Hoquiam
- Location:
- Alaska
32’x12’8”x33” fiberglass, top house, flush deck, Bristol Bay gillnetter built by Little Hoquiam in 1982. Volvo TAMD 70D rated at 267 hp w/ Twin Disc 506 reduction gear. Diesel drive IMS 7.5 ton RSW system w/ (2) zones. Packs 13k lbs in (10) insulated fish holds. Mar...
More Details- Year:
- 1967
- Length:
- 40
- Hull:
- Wood
- Location:
- Washington
40’x12.5’x6’ fiberglass over wood crabber built in 1967. Detroit 871 main rated at 180 hp. Twin Disc 509 gear. Fuel capacity of 280 gallons. Tanked fish hold packs 9,200 lbs of crab. 5500w gas generator powers crab lights. Deck equipment includes davit and crab bl...
More Details- Year:
- 1986
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Winterhalter Inc.
- Location:
- Alaska
32’x12’ fiberglass, flush deck, top house, sternpicker built by Winterhalter Inc. in 1986 and recently repowered and updated. John Deere 6068 rated at 330 hp, new in 2022, w/ Twin Disc 5061A gear. (10) reconfigured and insulated fish holds pack 16k lbs. Fixed reel w/...
More Details- Year:
- 1949
- Length:
- 53
- Hull:
- Steel
- Builder:
- Foss
- Location:
- Washington
53’x20’x7.5’ steel, twin screw tug boat by Foss in 1949, retrofitted in 1996. Caterpillar 3412 CIDITA 27 lr, V12 main engines w/ Twin Disc gears. Bollard pull of 16.87 short tons, makes 12 knots. Twin Lugger/Northern lights gensets make 20 kW each. 2400 gallons fuel...
More Details- Year:
- 1991
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Kvichak
- Location:
- Alaska
32’x13.5’x36” aluminum, flush deck, RSW, Bristol Bay gillnetter built by Kvichak in 1991. Lugger 6125 rated at 490 hp w/ Twin Disc 507 gear. Cruises at 10 kts.Cummins/Onan 5kW genset w/ wet exhaust, new in 2019. Updated hydraulically driven IMS 8.5 ton RSW system, new...
More Details- Year:
- 1967
- Length:
- 70
- Hull:
- Steel
- Builder:
- M&F Seacraft
- Location:
- Washington
70’x24’x9.8’ steel seiner, crabber, tender, built in 1967 by M&F Seacraft. Caterpillar C-18 main engine rated at 599 hp. Twin Disc MG516 gear. 150 kW John Deere 6068 and 100 kW John Deere 6068 gensets. Packs 160k# in (2) insulated fish holds. Pac West 42-ton RSW sys...
More Details- Year:
- 1980
- Length:
- 58
- Hull:
- Steel
- Location:
- Alaska
58’x29’x9’ steel longline catcher processor originally built in 1980 by Jones Goodell, rebuilt and sponsoned in 2012. GMC Series 60 main engine rated at 470 hp. Twin Disc 514C gear with 4.5:1 ratio. 270 kW GMC Series 60 and 45 kW John Deere gensets. Packs 90k# in (1...
More Details- Year:
- 2018
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Allioti/Matts Boat Works
- Location:
- Alaska
32’x15.5’ aluminum, Bristol Bay, double jet gillnetter, built in 2018 by Aliotti and fished by Matts Boat Works. Makes 25 kts while fishing. Twin FPT 5.7L each rated at 550 hp, keel cooled w/ (2) circuits per engine. ZF286 gears and Ultra Jet 340 HT water jets. Pack...
More Details- Year:
- 2003/2018
- Length:
- 37
- Hull:
- Fiberglass
- Builder:
- Buffalo Boats
- Location:
- Alaska
37’x11’x42” fiberglass, combination crab/dive/charter vessel completed in 2018. Built, extended and overseen by Buffalo Boats and outfitted by La Connor Maritime Fab. Cruises at 22 kts, makes 30 WOT. Less than 100 hrs on mains w/ all systems recently gone through. Tw...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Alaska
32’x13.6’x6’ fiberglass flush deck, RSW, Modutech built in 1980. Twin Cummins 6BTA 5.9 mains rated at 260 hp each w/ 4,300 hours. Twin Disc 5061 gears. Packs 12,000 lbs in (6) insulated and fiberglassed fish holds. IMS 7.5-ton RSW system. (2) Eaton 3.8 cu hydraulic...
More Details- Year:
- 1976
- Length:
- 54
- Hull:
- Steel
- Builder:
- Port Angeles - Jensen Design
- Location:
- Alaska
54’x17’ steel seiner/longliner built in 1976 in Port Angeles, Jensen design. GMC 8V71 main engine rated at 250 hp. Twin Disc 509 gear with 4.5:1 ratio. 40 kW John Deere and 20 kW Isuzu gensets. Packs 75k# in (2) fish holds, 60k# forward, 15 k# aft. Forward hold wit...
More Details- Year:
- 1980
- Length:
- 58
- Hull:
- Steel
- Builder:
- R.A. Reynolds
- Location:
- Washington
58’x22’x9.7’ steel seiner/crabber/longliner, built by R.A. Reynolds in 1980. Cruises at 9 knots. Cummins KTA19 main rated at 500 hp connect to PTO w/ (2) double pumps. Isuzu 60 kW genset and John Deere 96 kW genset w/ PTO and (3) hydraulic pumps. Packs apprx 140k lbs...
More Details- Year:
- 2010
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Strongback Boats
- Location:
- Alaska
32’x15’ aluminum Bristol Bay jet boat built by Strongback Boats in 2010. Scania Di12 rated at 650 hp w/ ZF325-1 reduction gear. Rebuilt bucket and overhauled 24” Tractor Jet w/ new trust bearing, seals and hydraulic ram. Packs 15k lbs in (10) freshly coat, double wal...
More Details- Year:
- 1991
- Length:
- 58
- Hull:
- Steel
- Builder:
- Tim Alls
- Location:
- Alaska
58’x22’ steel combination vessel built in 1991 by Tim Alls. Rigged for seining, trawl, long-lining, and pot-fishing. Cummins QSK19M main engine rated at 670 hp, rebuilt in 2025. Twin Disc 5222 gear with 6.1:1 ratio. 50 kW John Deere 6068 and 14 kW Isuzu 4LE1 gensets...
More Details- Year:
- 1980
- Length:
- 24
- Hull:
- Fiberglass
- Builder:
- Vashon Island Boat Works
- Location:
- Alaska
24’x7.6’x3’ fiberglass, double-ended, hand troller, built by Vashon Island Boat Works in 1980. Beta Marine BD1105 rated at 30 hp, new in 2020. Twin Disc TMC60P reduction gear w/ hydraulic clutch. Packs approx (150) coho, slush ice with Nomar brailer bags, in (2) tank...
More Details- Year:
- 1923
- Length:
- 65
- Hull:
- Wood
- Builder:
- Conrad Anderson
- Location:
- Washington
65’x18’x7.9’ wood Puget Sound seiner/tender, built in Gig Harbor by Conrad Anderson in 1923. Extensively refitted including planking, frames, deck, beams, stringers, stem to stern bulwarks, rigging, fuel tanks, electrical and more. Detroit 8V-71 main rated at 250 hp w...
More Details- Year:
- 1991
- Length:
- 58
- Hull:
- Steel
- Builder:
- Tim Alls
- Location:
- Washington
58’x23’ steel combination vessel built in 1991 by Tim Alls. Currently rigged for trawl, seine, and pot-fishing. Mitsubishi S6R2-Y3MPTAW-2 main engine rated at 803 hp. Twin Disc MGX5321 gear with 4.96:1 ratio. 110 kW John Deere 6068T and 55 kW Isuzu 4BG1 gensets. 8,...
More Details- Year:
- 1974
- Length:
- 40
- Hull:
- Steel
- Builder:
- Donald G. Barber
- Location:
- Oregon
40’x13’x6.3’ steel combination crabber and tuna/salmon troller with permits. Built in 1974, bulbous bow added in 2015. Detroit 6-71 main rated at 174 hp, overhauled in 2022. Twin Disc 509 gear. 1000 gallons fuel capacity in (2) tanks. Isuzu 11 kw generator, recentl...
More Details- Year:
- 1983
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Hydraulic Fishing Supply
- Location:
- Alaska
32’x13’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Hydraulic Fishing Supply in 1983. Re-man Cummins 6CTA 8.3L rated at 430 hp and rebuilt Twin Disc 507 gear. Diesel drive IMS 7.5 ton RSW system w/ generator. Packs 10k lbs in (8) updated and insulated f...
More Details- Year:
- 1983
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Wesley/Gronler Boat Works
- Location:
- Alaska
32’x13.5’ fiberglass, flush deck, RSW, twin screw, gillnetter built by Wegley in 1983. Twin Detroit 8.2L mains, each rated at 210 hp. Twin Disc 502 gears w/ 2:1 ratio. Diesel drive IMS 8.5 ton RSW. Packs 12K lbs in (8) insulated holds. Kinematics power roller, and n...
More Details- Year:
- 1990
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Wegley
- Location:
- Alaska
32’x13’ fiberglass jumbo Wegley, built in 1990. Cummins 903 main engine rated at 425 hp, burns 2.5 GPH. Twin Disc 507 gear. Bow thruster. Packs 11k# in (7) Insulated fish holds. 10 ton Marine Refrigeration Solutions RSW system. (2) Vickers hyd pumps on elec. clutch...
More Details- Year:
- 1979
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Snoball
- Location:
- Alaska
40’x11’x5’ fiberglass troller built by Snoball in 1979. Caterpillar 3208 main engine rated at 190 hp. Twin Disc 506 gear with 2.9:1 ratio. (3) steering stations. Packs 4k lbs in slush tanks and 10k lbs on ice. Recent upgrades include all new plumbing throughout, dr...
More Details- Year:
- 1981
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x11.5’x36” aluminum, RSW, flush deck, Bristol Bay gillnetter built by Shore in 1981. Repowered w/ John Deere 6068 rated at 201 hp w/ 4k hrs and Twin Disc 5050 reduction gear. PacWest 10 ton RSW system. Packs 11k lbs in (8) insulated and fiberglassed fish holds. S...
More Details- Year:
- 2013
- Length:
- 50
- Hull:
- Steel
- Builder:
- Fort Bragg
- Location:
- California
50’x16’x6.5’ steel troller/cruiser, like new, custom built in 2019 in Fort Bragg, CA. John Deere 6068 main engine rated at 200 hp, very low hours. 2k gallons fuel capacity in (4) tanks. Burns 1.5-2 gph at 6 knots, makes easy 10 knot cruise. Packs 35k# in (1) insulat...
More Details- Year:
- 1993
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All Points
- Location:
- Alaska
32’x15’x36” aluminum, flush deck, RSW, Bristol Bay gillnetter built by All Points in 1993. Cat C9 rated at 507 hp w/ Twin Disc 5114 gear. Updated top house and fish hold insulation in 2018. IMS 7.5 ton RSW system. Packs 16k lbs in (8) insulated f...
More Details- Year:
- 1950
- Length:
- 58
- Hull:
- Wood
- Builder:
- Peterson Boat Co.
- Location:
- Washington
58’x17.5’x7.5’ wood crabber built by Peterson Boat Co. in 1950. GMC 8V92 main engine rated at 365 hp, rebuilt in 2023. Allison gear with 3.07:1 ratio. 35 kW Isuszu 4 cyl gen set. 1,300 gallons fuel capacity in (2) tanks. Packs 24k# dungeness crab in (!0 fiberglass...
More Details- Year:
- 1998
- Length:
- 34
- Hull:
- Fiberglass
- Builder:
- Northshore
- Location:
- Washington
34’11”x13’8”x4’ fiberglass, lobster style, crabber/sternpicker built by Northshore in 1998. Cruises at 12 knots, makes 20 knots. Cummins QSB 6.7L rated at 425 hp w/ wet exhaust and ZF280 reduction gear. Crab deck gear includes hydraulic davit, Junes 15” crab block,...
More Details