CO19-006

$220,000
Year:
1979
Length:
38
Hull:
Fiberglass
Builder:
Ledford
Location:
Alaska

CO19-006

38'x13' fiberglass combination vessel built in 1979 by Ledford. Currently rigged as a seiner, longliner, and pot vessel. John Deere 6068 main engine rated at 175 hp. Twin Disc 506 gear with 1.97:1 ratio. Packs 25,000# in insulated fishhold. IMS 7.5 ton RSW System....

More Details

PK19-001

$320,000
Year:
1944
Length:
60
Hull:
Wood
Builder:
Seth Green
Location:
Washington

PK19-001

60'x18'x8' wooden drum seiner built in by Seth Green in 1944. Cat 343 main rated at 315 hp. Twin Disc gear with 5.16:1 ratio. 20 kW Mitsubishi genset with low hours. Packs 70,000# salmon in (1) insulated fish hold. 10'x12' drum hydraulic stern ramp. Deck equipment i...

More Details

SE17-007

$45,000
Year:
1925
Length:
62
Hull:
Wood
Builder:
Skansi
Location:
Alaska

SE17-007

62'x15.5'x7' grandfathered AK seiner, built in 1925 by Skansi Shipyard. Detroit 8-71 main rated at 310 hp. Twin Disc MG 509. 1,200 gallons fuel capacity in (4) tanks. Isuzu 20 kw generator. 15 ton RSW. Boom with slider, vanging, deck winch and power block. Radar,...

More Details

BB18-033

$60,000
Year:
1980
Length:
32
Hull:
Fiberglass
Builder:
Mel Martin
Location:
Alaska

BB18-033

32'x12'x3' fiberglass flush deck, RSW, Bristol Bay boat, built by Mel Martin in 1980. Detroit 6V71 main. 506 marine gear. New Vickers hydraulic pump. Pac West 7.5 RSW system, powered by diesel drive split pack, w/ new compressor. Maritime Fab roller, aluminum reel...

More Details

DV18-004

$135,000
Year:
1985
Length:
38
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

DV18-004

38'x12'x4' fiberglass sternpicker/dive built by Roberts in 1985. Cat 3126 rated at 350 hp w/ Twin Disc MG507 gear. 300 ftm net reel w/ levelwind and power roller. (7) fish holds pack 15k lbs salmon. Includes dive ladder, cuke/geoduck table, LL drum, ground line w/...

More Details

CO18-041

$40,000
Year:
1981
Length:
32
Hull:
Fiberglass
Builder:
Modutech
Location:
Alaska

CO18-041

32'x14'x6' twin-screw fiberglass combination vessel built in 1981 by Modutech. (2) Cat 3208 main engines rated at 260 hp each. Twin Disc marine gears. Packs approximately 4,500# crab, 10,000# halibut in (4) holds. Deck equipment includes a crab block, longline haule...

More Details

PK18-026

$120,000
Year:
1962
Length:
32
Hull:
Fiberglass
Builder:
West Coast Marine
Location:
Alaska

PK18-026

32'x10.4'x4.3' fiberglass, tophouse, sternpicker, built by West Coast Marine in 1962. Cummins 6BTA 5.9L main rated at 210 hp, w/ 4,000 hours. Twin Disc 509 gear. Portable Honda generator. Fuel capacity of 264 gallons in (2) tanks. Packs 8,000# in (8) holds. Queens...

More Details

PK18-022

$200,000
Year:
1924
Length:
47
Hull:
Wood
Location:
Oregon

PK18-022

47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Inc...

More Details

SE18-020

$315,000
Year:
1978
Length:
57
Hull:
Wood
Builder:
Wahl
Location:
Washington

SE18-020

57'x18'x10' wood seiner built by Wahl in 1978. Cummins 855 rated at 300 hp w/ Twin Disc gear, approx 3k hrs. Perkins 45 kW and Kabota 27 kW gensets both w/ low hours. Aluminum top house and bulwarks. All new RSW system w/ (2) compressors. Insulated fish hold packs...

More Details

SP18-019

$30,000
Year:
1959
Length:
32
Hull:
Aluminum
Builder:
Marco
Location:
Alaska

SP18-019

32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics i...

More Details

PL18-005

$75,000
Year:
1982
Length:
25
Hull:
Fiberglass
Builder:
Farallon
Location:
California

PL18-005

25'x8' fiberglass, built in 1982 by Farallon. 325 hp Mercruiser gas, only 2 hrs on engine. 12 gpm hydraulics, electric clutch. 500# fish hold. Crab block, davit, and salmon tree w/ poles. Electronics include GPS, plotter, autopilot, sounder, and (2) VHF. Asking $7...

More Details

PR18-001

$500,000
Year:
1942
Length:
180
Hull:
Steel
Builder:
USCG
Location:
Washington

PR18-001

180'x36.8'x13' catcher processor longline vessel, built in 1942 by USCG, converted in 1979. Recently operated in freezer longline fishery. ALCO C-251 main, rated at 1,450 hp. (2) 300kW CAT and (1) 135kW CAT 3306 gensets. All processing equipment included, able to pr...

More Details

TE18-012

$299,900
Year:
1979
Length:
76
Hull:
Steel
Builder:
Erwin Pope
Location:
Alaska

TE18-012

76'x16'x4' steel scow built in 1979 by Erwin Pope. Currently operated as a tender. Twin GM 871 mains rated at 315 hp each. Twin Disc 509 gear with 2:1 ratio. 85 kW Mitsubishi and 65 kW Northern Lights gen sets. Packs 100,000# in (2) holds. 25 ton IMS RSW and 16.8...

More Details

TR18-035

$32,000
Length:
22
Hull:
Wood
Location:
Oregon

TR18-035

22'x8'x6" wood troller modeled after Learned Dory design. Home built in 2005 and lightly used. Volvo Penta 4.3 GXI-EF main w/ fresh water exchanger, rated at 225 hp w/ only 360 hours. Volvo Penta SX outdrive. Cruises at 25 kts. 60 gallon fuel capacity. Packs 1,500...

More Details

TR18-033

$185,000
Year:
1974
Length:
40
Hull:
Fiberglass
Builder:
Uniflite
Location:
Alaska

TR18-033

40'x11.9'x5.6' fiberglass troller/longliner built by Uniflite in 1974. Detroit 4v71 main rated at 125 hp. Twin Disc w/ 2:1 ratio. Fuel capacity of 370 gal in (2) tanks. Insulated fish hold packs 10k-12k lbs iced fish. (2) Hasbra 3-spool gurdies and 12” hydroslave h...

More Details

SP18-016

$270,000
Year:
1985
Length:
32
Hull:
Aluminum
Builder:
Hydraulic Fishing Supplyr
Location:
Alaska

SP18-016

32'x14' aluminum flush deck sternpicker built in 1985 by Hydraulic Fishing Supply. Detroit 6V92 main engine rated at 420 hp. Twin Disc 509 gear with 2:1 ratio. 7.5 to IMS RSW system, completely overhauled in 2017. Holds 25,000#. Deck gear includes Maritime Fab reel...

More Details

PL18-004

$38,000
Year:
1970
Length:
36
Hull:
Wood
Builder:
Grand Banks
Location:
Alaska

PL18-004

36'x12'x5' wood pleasure vessel built by Grand Banks in 1970. Ford Lehman main engine rated at 120 hp with 8,600 hours. BorgWarner gear. Cruises at 8 knots. Aluminum fuel tanks with 400 gallons capacity. (2) staterooms, fully equipped galley, galvanized steel water...

More Details

SP18-013

$69,000
Year:
1969
Length:
38
Hull:
Fiberglass
Builder:
Unknown
Location:
Alaska

SP18-013

38’x12.5’ sternpicker, fiberglass over wood, built 1969. Rigged for gillnet and shrimp pot fishing. 250 hp Cummins 6BTA, appr. 15,000 hrs. Makes 8 knots. Northern Lights gen set. 7.5 ton IMS hydraulic RSW system. Packs 20k# in (5) insulated fish holds. Gillnet...

More Details

SE18-010

$200,000
Year:
1967
Length:
58
Hull:
Wood
Builder:
Carlson
Location:
Washington

SE18-010

58'x17'x8' wood seiner, built in 1967 by Carlson. Cat 343 main rated at 325 hp, w/ low hrs on rebuild. Twin Disc 514 gear. Isuzu auxiliary. Main boom w/ Knucklehead and hyd vanging. 30" Sikich block. Packs 75,000# in two holds, 15 ton RSW system. Electro...

More Details

TE18-004

$1,435,000
Year:
2015
Length:
50
Hull:
Aluminum
Builder:
Mavrik
Location:
Washington

TE18-004

50’x24’x42” aluminum tender rigged to tender setnets and crab. Jensen design, built by Mavrik in 2015. Twin 410 hp Cummins QSL9 mains, ZF gears. John Deere 65 kW and Northern Lights 12 kW gen sets. Deck crane w/ 2k# lift at 30’ reach. (4) aluminum, insulated, remov...

More Details

CR18-004

$850,000
Year:
1979
Length:
50
Hull:
Steel
Builder:
Monk Design
Location:
California

CR18-004

50'x15'x8.5' steel combination vessel, rigged for crab and tuna. Monk design, built by W. Robertson in 1979. Cummins main rated at 325 hp. Kubota 30 kW auxiliary. 1,800 gallon fuel capacity in (4) tanks. 10 ton Spray Brine system w/ 5F30 Carrier compressor. Capac...

More Details

RS17-005

$800,000
Year:
1978
Length:
70
Hull:
Steel
Builder:
Nichols Bros
Location:
Alaska

RS17-005

70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 t...

More Details

CO17-019

$275,000
Year:
1984
Length:
64
Hull:
Steel
Builder:
Davies/Gillespie
Location:
California

CO17-019

64'x18.5' steel schooner rigged as combination LL/pot/troller, built in 1984. Cat 334 rated at 250 hp. MG 509 gear w/ 4.5:1 ratio. John Deere 4219 30 kw and Isuzu 4.5 kw auxiliaries. Packs 80k lbs in insulated, polyurethane coated fish holds. 25 ton Bohn blast free...

More Details

BB17-027

$60,000
Year:
1989
Length:
32
Hull:
Aluminum
Builder:
Raider
Location:
Alaska

BB17-027

32’x11’ aluminum Bristol Bay bowpicker, built in 1989 by Raider. Set off bow or stern. Twin Mercury 200 hp 2-stroke outboards, new in 1999, mounted on hydraulic lift. (2) hydraulic power packs. Packs appr 12,000# in holds. GPS, VHF, and sounder. Sleeps 4. Very sh...

More Details

UT17-007

$511,000
Year:
2007
Length:
47
Hull:
Aluminum
Builder:
Rozema
Location:
Alaska

UT17-007

47'x16' aluminum oil skimmer/response vessel, built in 2007 by Rozema. Twin 600 hp Lugger 6140 mains, Northern Lights 9 kW gen set. Push knees, and 4 padeyes for lifting. Well equipped with Lamor 2 brush pack skimming system, 50 BBL recovery tank, off-loading pump, c...

More Details

SP17-012

$60,000
Year:
1974
Length:
40
Hull:
Fiberglass
Builder:
Mel Martin
Location:
Alaska

SP17-012

40’x11.7’ fiberglass flush deck sternpicker built as a 36’ by Mel Martin, then extended to 40’. Cummins 6BTA rated at 250 hp. Twin Disc MG506 gear w/ 2.5:1 ratio. (6) fish holds. Hydraulic reel, level wind and Marco power roller. Aluminum outriggers w/ SS cable. 2...

More Details

BB17-019

$30,000
Year:
1978
Length:
32
Hull:
Aluminum
Builder:
Sea Venture
Location:
Alaska

BB17-019

32'x12' aluminum Bristol Bay gillnetter, built in 1978 by Sea Venture. GMC 6V53 with appr. 3,100 hours. Cessna hydraulic pump. Packs up to 15,000 pounds in 5 holds. Drum with levelwind, Clatskanie power roller. Electronics include Raytheon radar, VHF, sounder and p...

More Details

TR17-018

$225,000
Year:
1976
Length:
50
Hull:
Steel
Builder:
Senteio Boats
Location:
Alaska

TR17-018

50'x14'x8' steel freezer troller also rigged for spot prawns, built in 1976. GMC 671 main rated at 165 hp. 28kw Isuzu 4LE3 aux. Packs 10,000 lbs with additional plate freezer on deck. Simplex troll gurdies, Warren Junes pot hauler, boom w/ 4 ton winch. Full Furuno...

More Details

TE16-012

$300,000
Year:
1942
Length:
86
Hull:
Wood
Builder:
Maritime Shipyards
Location:
Washington

TE16-012

86'x26' wood shallow draft power scow, built in 1942 by Maritime Shipyards. Twin Cat 3406 mains rated at 275 hp. Port main new in 2018, starboard complete rebuilt in 2017. Recently gone through Gen sets include (2) Cat 3306 150 kw and Isuzu 20 kw.  Pack...

More Details

TR16-029

$160,000
Year:
1971
Length:
48
Hull:
Steel
Builder:
Loren Runner
Location:
Alaska

TR16-029

48'x13'x6.6' steel troller, built in 1971. GMC 6-71 rated at 185 hp, appr. 9,000 hrs on 2006 overhaul. Currently an ice boat, but Perkins generator and blast freeze system on board but neither used since 2006. GPS/plotter, radar, (2) VHF, sounder, ComNav pilot and mo...

More Details

Sign up for email updates