CR23-010

$250,000
Year:
2017
Length:
47
Hull:
Fiberglass
Builder:
Custom
Location:
California

CR23-010

47’x15’x5.5’ custom built lobster boat. Keel laid by Long Beach Boatyard (CAN) in 2005, owner completed in 2017. Twin John Deere 8.1 mains rated at 380 hp each, both w/ low hours. ZF 280-1A gears. Isuzu 15kw genset. Fuel capacity of 1,000 gallons. Packs an estimated...

More Details

TN23-002

$450,000
Year:
1974
Length:
53
Hull:
Steel
Builder:
Trask
Location:
California

TN23-002

54’x18’x9’ steel combination tuna troller / bait boat built by Trask in 1974. Cat 3406T rated at 350 hp. Twin Disc 514 gear w/ 4.5:1 ratio. Isuzu 4BG1N 40 kW and Isuzu 4BG1T 50 kW gensets. (2) Carrier 5F60 compressors, (2) 15 hp motors, titanium condensers and Carve...

More Details

CR23-002

$395,000
Year:
2021
Length:
34
Hull:
Aluminum
Builder:
Svendsen
Location:
Alaska

CR23-002

34’x12’x2’ new aluminum Svendsen built in 2021, rigged for crab, shrimp, and longline. Twin Honda 225hp outboards w/ 190 hours each. Cruises at 25kts, and does 44kts WOT. Fuel tank holds 340 gallons. (4) fish holds pack a reported 5,000 lbs. Deck equipment includes...

More Details

LL22-006

$350,000
Year:
1973
Length:
52
Hull:
Steel
Builder:
Monk
Location:
Alaska

LL22-006

52’x16’x6’ Monk designed Cor-Ten steel longliner/troller, built by Port Angeles Shipyard in 1972. Twin Cummins 6BT 5.9L mains rated at 120hp each. Twin Disc 506-1 gears. 15kw Isuzu genset. (2) Vickers variable speed hydarulic pumps. Insulated fish hold packs 30,000...

More Details

LL22-005

$149,000
Year:
1945
Length:
69
Hull:
Wood
Builder:
Hanson
Location:
Washington

LL22-005

69’x18’ wood longliner built by Hanson Boat Co. in 1945. Caterpillar 353 main engine rated at 425 hp, installed in 2022. Twin Disc 521 gear with 4:1 ratio. Cruises at 9.5 knots. 30 kW Kubota and 18 kW Yanmar gensets. 3600 gallons fuel capacity in (4) tanks. Packs...

More Details

CR22-028

$395,000
Year:
1977
Length:
52
Hull:
Steel
Builder:
Leo H. Bohn
Location:
Oregon

CR22-028

52’x15’x7’ steel combination vessel rigged for crab, tuna, salmon, longline, and built by leo H. Bohn in 1977. Detroit 871 main rated at 325 hp w/ Twin Disc 509 gear. 65kw John Deere genset. Spray brine system w/ 15-ton compressor. Fish hold packs 50,000 lbs tuna, a...

More Details

LL22-004

$775,000
Year:
1975
Length:
78
Hull:
Steel
Builder:
Berg Shipyard
Location:
Alaska

LL22-004

78’x22.6’x11’ steel combination built by Berg in 1975. Rigged for tendering, longline and pots. GMC 12-V149 main rated at 725 hp. GMC 671 90 kW and Lugger 55 kW gensets. Packs 168,000 lbs cod in (2) insulated fish holds. 30 ton RSW system w/ new compressor, (2) cir...

More Details

CO22-006

$950,000
Year:
1974
Length:
58
Hull:
Steel
Builder:
Marco
Location:
Alaska

CO22-006

58’x18.3’x9.3’ steel combination vessel rigged for pots, longline and tendering. Built by Marco in 1974. Cummins KT-19-M rated at 425 hp w/ Twin Disc 514 reduction gear. John Deere 4045 w/ 55kW and Sahabu w/ 22kW gensets. Packs 98k lbs in (2) insulated fish holds....

More Details

TN22-003

$450,000
Year:
1979
Length:
83
Hull:
Aluminum
Builder:
Penco
Location:
Washington

TN22-003

83’x23’x11’ aluminum tuna troller built by Penco in 1979. (2) Detroit Series 60 mains, each rated at 400 hp. Twin Disc MG514 gears. (2) John Deere 4045 40 kW gensets. (2) insulated fish holds pack 166k lbs or 83 tons of frozen product. Carlyle 5H-40 hp and (2) Carly...

More Details

BP22-001

$225,000
Year:
1988
Length:
33
Hull:
Aluminum
Builder:
J&H Boatworks
Location:
Alaska

BP22-001

33.5’x12’ aluminum bowpicker/longliner built in 1988 by J&H Boatworks. Twin Volvo D6330A main engines rated at 330 hp each. Cruises at 25 knots. 200 gallons fuel capacity in (2) tanks. Packs 18k#. Full galley and marine head. Deck equipment includes drum and power...

More Details

TN19-019

$130,000
Year:
1980
Length:
54
Hull:
Steel
Builder:
Cobble Hill
Location:
British Columbia

TN19-019

54’x17’x8’ steel schooner built in 1980 at Cobble HIll in Vancouver, BC. GMC 671 main engine rated at 190 hp. Twin Disc 509 gear with 3:1 ratio. 7 kW Isuzu gen set. Holds 1,500 gallons fuel in (2) tanks. 15 ton blast freeze system with (5) plates. Packs 38,000# of...

More Details

TR22-003

$175,000
Year:
1993
Length:
47
Hull:
Steel
Builder:
Jon Hokman
Location:
California

TR22-003

47’x13.5’ steel troller/longliner built in 1993 by Hokman. John Deere 6068 main engine rated at 185 hp. Twin Disc gear. Isuzu 4LEI gen set. 20k# capacity, blast-frozen, in (1) hold. Deck equipment includes 3-spool Kolstrand gurdies, Junes longline hauler, and tuna...

More Details

CR22-005

$375,000
Year:
1968
Length:
36
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

CR22-005

36’x11’x5’ aluminum Shore built in 1968, INCLUDING CA 400 pot crab permit good to 69’10” mloa. Crusader 454 main rated at 350 hp, w/ less than 500 hours. Insulated fish hold packs 16,000 lbs. Deck equipment includes net reel and power roller. Electronics include GPS...

More Details

LL21-005

$950,000
Year:
1944
Length:
180
Hull:
Steel
Builder:
Higgens
Location:
Washington

LL21-005

180’x32’x15’, twin-screw freezer longliner built in 1944 by Higgins Industres Inc. Built to ABS qualifications and currently maintained to load-line and class specifications. Converted to a freezer/longliner in 1991 by Foss Shipyard. Twin Caterpillar 3412 main engines...

More Details

CO21-008

$925,000
Year:
2021
Length:
45
Hull:
Fiberglass
Builder:
Millennium Marine
Location:
Washington

CO21-008

45’x16’x5’ fiberglass, combination crabber/gillnetter built in 2021. Millennium Marine 45 hull. John Deere 6135 SFM85 rated at 750 hp w/ Twin Disc 5126. 18 kts WOT and 10 kts cruise. Aluminum roof, free standing mast, and 16’ boom. Getec 7.5 kW hydraulic generator....

More Details

SE21-010

$690,000
Year:
1977
Length:
58
Hull:
Fiberglass
Builder:
Kettenberg Marine
Location:
Alaska

SE21-010

57’x20’x7.5’ fiberglass seiner/combination vessel built in 1977 by Kettenberg Marine in Point Loma, CA. Cat 3406 main engine rated at 425 hp. Twin Disc MG5114 gear, new in 2019. Isuzu 60kW and 40kW gen sets. 3,700 gallons fuel capacity. Packs 100k# in (4) fish holds....

More Details

LL21-003

$79,000
Year:
1988
Length:
27
Hull:
Fiberglass
Builder:
Boston Whaler
Location:
California

LL21-003

27’x10’x2’ fiberglass Boston Whaler built in 1988, rigged for nearshore fishing and longline. Twin Honda BF250 hp outboards w/ only 900 hours. Cruises at 22 kts, and 30+ kts WOT. 300 gallon fuel capacity in (3) tanks. Honda powerpack runs Warren Junes 15” hauler, Hy...

More Details

CR21-004

$245,000
Year:
1980
Length:
48
Hull:
Steel
Builder:
Troyer, JandH Boatworks
Location:
Alaska

CR21-004

48’x16’x8.8’ steel crabber/longliner built by Troyer in 1980. Cummins 855 main engine rated at 275 hp. Twin Disc 509 gear with 3:1 ratio. Makes 7 knots, 1200 gallons fuel capacity in (2) tanks. 40 kW John Deere 4045 genset. Packs 46k# cod in (1) fish hold. 20 ton...

More Details

CO21-004

$100,000
Year:
1978
Length:
42
Hull:
Fiberglass
Builder:
Vega Marine
Location:
California

CO21-004

42’x14’x5’ fiberglass combination vessel, currently rigged for crabbing and trolling, built by Vega Marine in 1978. Cummins 6CTA8 main engine rated at 255 hp. Twin Disc 509 gear with 2.5:1 ratio. Makes (8) knots. 34 kW Kubota generator. Packs 9k# in (2) insulated f...

More Details

PR21-001

$700,000
Year:
1944
Length:
156
Hull:
Steel
Builder:
Ira Bushey and Sons
Location:
Washington

PR21-001

156’x30’x10.6’ steel, catcher processor, longline vessel, built for the Navy by Ira Bushey and Sons in 1944. Converted to LL, freezer processor in 2002. Cat 3512 main rated at 1280 hp w/ Twin Disc MG530 gear. (2) Cat 3406 w/ 320 kW gensets, plus backup Perkins gen....

More Details

TR21-001

$190,000
Year:
1973
Length:
41
Hull:
Fiberglass
Builder:
Custom, Monk design
Location:
Hawaii

TR21-001

41’x12’x6’ custom fiberglass tuna longliner and troller, built in 1973. Detroit 453 main rated at 140 hp w/ 1,500 hrs on rebuild and Borg Warner Velvet drive gear. 15kW Kubota genset. 650 gallon fuel capacity in (4) tanks. Packs 8,000 lbs in (3) fiberglass fish hold...

More Details

TR15-002

$75,000
Year:
1970
Length:
36
Hull:
Fiberglass
Builder:
Albion
Location:
Alaska

TR15-002

36’x10.5’x5’ fiberglass troller/longliner, built in 1970 by Albion. Volvo MD70 rated at 120 hp, Capitol reduction gear. New Nidacore deck and rebuilt fish holds. Packs 12k lbs in (9) insulated fish holds. New sliding longline reel built by Precision Boatworks. Alumi...

More Details

CR19-036

$90,000
Year:
1984
Length:
32
Hull:
Aluminum
Builder:
La Conner
Location:
Alaska

CR19-036

32’x14’x3’ aluminum crabber/longliner combination vessel built by La Conner in 1984. Twin Cummins 6BTA main engines rated at 315 hp each. ZF 2-20 AS gears. Yamaha EF2600 110v portable generator. Deck equipment includes Maritime Fab roller, longline reel with level...

More Details

LL19-020

$650,000
Year:
1974
Length:
52
Hull:
Fiberglass
Builder:
Little Hoquiam
Location:
Alaska

LL19-020

52’x16’x9’ fiberglass combination longliner/freezer troller, built by Little Hoquiam in 1974. GMC 8v71 main rated at 320 hp, w/ Twin Disc 509 gear. Isuzu 23 kW genset. Fuel capacity of 1,500 gallons in (4) tanks. Blast freeze system w/ 15 ton compressor, electric dr...

More Details

TE19-008

$565,000
Year:
1980
Length:
59.5
Hull:
Fiberglass
Builder:
Frostad
Location:
Alaska

TE19-008

59.5’x18’x11’ fiberglass longliner/tender. Built in 1980 by Frostad in Vancouver, BC. Cummins KTA1150 450 hp main engine rated at 450 hp. Twin Disk 503 gear with 4.5:1 ratio. 5.5 kW Yanmar genset. Packs 150,000k# in (2) holds. 20 ton RSW unit, not plumbed. Deck...

More Details

SP19-002

$135,000
Year:
1970
Length:
39.5
Hull:
Fiberglass
Builder:
Westport
Location:
Alaska

SP19-002

39.5’x12.5’x3.7’ fiberglass sternpicker/troller built by Westport in 1970. Recently installed factory remanufactured Cat 3208NA rated at 215 hp. Twin Disc 506 reduction gear w/ 3:1 ratio. Stretch and composite aft-deck work by Sunfjord. Packs 10k lbs in (6) insulat...

More Details

PR18-001

$500,000
Year:
1942
Length:
180
Hull:
Steel
Builder:
USCG
Location:
Washington

PR18-001

180'x36.8'x13' catcher processor longline vessel, built in 1942 by USCG, converted in 1979. Recently operated in freezer longline fishery. ALCO C-251 main, rated at 1,450 hp. (2) 300kW CAT and (1) 135kW CAT 3306 gensets. All processing equipment included, able to pr...

More Details

TR18-033

$185,000
Year:
1974
Length:
40
Hull:
Fiberglass
Builder:
Uniflite
Location:
Alaska

TR18-033

40'x11.9'x5.6' fiberglass troller/longliner built by Uniflite in 1974. Detroit 4v71 main rated at 125 hp. Twin Disc w/ 2:1 ratio. Fuel capacity of 370 gal in (2) tanks. Insulated fish hold packs 10k-12k lbs iced fish. (2) Hasbra 3-spool gurdies and 12” hydroslave h...

More Details

CO17-019

$275,000
Year:
1984
Length:
64
Hull:
Steel
Builder:
Davies/Gillespie
Location:
California

CO17-019

64'x18.5' steel schooner rigged as combination LL/pot/troller, built in 1984. Cat 334 rated at 250 hp. MG 509 gear w/ 4.5:1 ratio. John Deere 4219 30 kw and Isuzu 4.5 kw auxiliaries. Packs 80k lbs in insulated, polyurethane coated fish holds. 25 ton Bohn blast free...

More Details

Sign up for email updates