- Year:
- 2021
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Millennium Marine
- Location:
- Washington
45’x16’x5’ fiberglass, combination crabber/gillnetter built in 2021. Millennium Marine 45 hull. John Deere 6135 SFM85 rated at 750 hp w/ Twin Disc 5126. 18 kts WOT and 10 kts cruise. Aluminum roof, free standing mast, and 16’ boom. Getec 7.5 kW hydraulic generator....
More Details- Year:
- 1966
- Length:
- 36
- Hull:
- Aluminum
- Builder:
- Matsumoto
- Location:
- Oregon
36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Rebuilt Cummins 6BTA rated at 315 hp w/ 2k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold. Hydraulic davit, 15” Junes block and bins for crab tank. Vickers 24 GPM hydraulic...
More Details- Year:
- 1965
- Length:
- 36
- Hull:
- Aluminum
- Builder:
- Matsumoto
- Location:
- Oregon
36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Recently upgraded Cummins 6BTA rated at 315 hp w/ 1k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold w/ insert. Hydraulic davit, 17” Junes block and dump box. Vickers 24...
More Details- Year:
- 1978
- Length:
- 30
- Hull:
- Fiberglass
- Builder:
- Wilson
- Location:
- California
30’x10’x3’ fiberglass Wilson built in 1978, rigged for nearshore and longline. Cummins QSL 8.9 main rated at 405 hp w/ 5,300 hours. ZF 280 V-Drive w/ 1.56:1 ratio. Fish hold capacity of 2,500 lbs + 1,000 lbs ice. Deck equipment includes 15” Warren Junes hauler, (2)...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Hoquiam
- Location:
- California
38.5’x13’x5’ fiberglass Hoquiam crabber/troller built in 1970. Detroit 653 main rated at 150 hp w/ Twin Disc gear. 3kw Honda genset. Fuel capacity of 500 gallons in (2) tanks. Packs 12,000 lbs frozen tuna. Blast freeze system w/ Carrier 5f-30 compressor. Rece...
More Details- Year:
- 1993
- Length:
- 73
- Hull:
- Steel
- Builder:
- Portier
- Location:
- Oregon
73’x22’x8.3’ steel shrimp trawler built by Portier in 1993, and also rigged for crab and bottom trawling. CAT 3408 main rated at 470 hp, w/ Twin Disc 516c reduction gear. Detroit 371 30kw and John Deere 6068t 100kw genset w/ PTO electric clutch to run all hydros. 11,0...
More Details- Year:
- 1988
- Length:
- 27
- Hull:
- Fiberglass
- Builder:
- Boston Whaler
- Location:
- California
27’x10’x2’ fiberglass Boston Whaler built in 1988, rigged for nearshore fishing and longline. Twin Honda BF250 hp outboards w/ only 900 hours. Cruises at 22 kts, and 30+ kts WOT. 300 gallon fuel capacity in (3) tanks. Honda powerpack runs Warren Junes 15” hauler, Hy...
More Details- Year:
- 1987
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- LaConner Boat
- Location:
- Washington
32’x10’ aluminum crab/longline vessel built by LaConner Boat in 1987. Volvo TMD41A main engine rated at 220 hp. Cruises as 8-10 knots. 400 gallons fuel capacity. (6) fish holds. Deck gear includes crab davit, power block, picking boom, and longline h...
More Details- Year:
- 1980
- Length:
- 48
- Hull:
- Steel
- Builder:
- Troyer, JandH Boatworks
- Location:
- Alaska
48’x16’x8.8’ steel crabber/longliner built by Troyer in 1980. Cummins 855 main engine rated at 275 hp. Twin Disc 509 gear with 3:1 ratio. Makes 7 knots, 1200 gallons fuel capacity in (2) tanks. 40 kW John Deere 4045 genset. Packs 46k# cod in (1) fish hold. 20 ton...
More Details- Year:
- 1978
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Vega Marine
- Location:
- California
42’x14’x5’ fiberglass combination vessel, currently rigged for crabbing and trolling, built by Vega Marine in 1978. Cummins 6CTA8 main engine rated at 255 hp. Twin Disc 509 gear with 2.5:1 ratio. Makes (8) knots. 34 kW Kubota generator. Packs 9k# in (2) insulated f...
More Details- Year:
- 1982
- Length:
- 32
- Hull:
- Wood
- Builder:
- Gary Morris
- Location:
- California
32’x11’x3.5’ fiberglass over wood troller built in 1982 by Gary Morris. GMC 353T main engine rated at 175 hp. Burns 2.5 GPH.makes 7 knots. 150 gallons fuel capacity in (2) tanks. 3650 watt gas generator. Packs 1200# tank in, 3k# dry. Deck equipment includes Junes...
More Details- Year:
- 1977
- Length:
- 28
- Hull:
- Fiberglass
- Builder:
- Fiberform
- Location:
- Washington
28’x10.5’x1’ fiberglass commercial crabber built by Fiberform in 1977. Volvo D6 main rated at 330 hp w/ 2,300 hrs. 30kt cruise and 40kt WOT. Fuel capacity of 150 gallons. Belt driven hydraulics w/ electric clutch. Includes 12” Hydroslave block, davit w/ hydraulic r...
More Details- Year:
- 1974
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
42’x14’ fiberglass siene/tender built in 1974 by Delta. Detroit 6V92 main engine rated at 235. Twin Disc 509 with 2:1 ratio. Makes 8 knots. Honda gen set. Packs 35k# of salmon in (1) insulated fish hold. 12 ton IMS RSW system. Full head. Electronics include (2)...
More Details- Year:
- 1979
- Length:
- 62' 3.5"
- Hull:
- Steel
- Builder:
- Monk design, OK Welding
- Location:
- California
62’3.5"x19’x10’ steel combination vessel rigged for trawl and tuna. Monk design, built by OK Welding in 1979. Cummins KT 1150 main w/ Twin Disc 514 gear. 6-cyl John Deer aux and 40kW Isuzu genset. 6,000 gal fuel capacity in (6) tanks. Blast freeze system, 5F40 comp...
More Details- Year:
- 1977
- Length:
- 54
- Hull:
- Fbr/wood
- Builder:
- Seaway
- Location:
- California
54’x16.2’x6’ fiberglass over wood combination vessel, rigged for crab, troll, and live bait seining. Built by Seaway in 1977. Detroit 871 main rated at 318 hp w/ 2,200 hrs on rebuild. Twin Disc 509 gear. 35kw Isuzu genset, new in 2018. Packs 20,000# in (4) tanked/i...
More Details- Year:
- 1970
- Length:
- 28.7
- Hull:
- Fiberglass
- Builder:
- C&M Manufacturing
- Location:
- California
28.6’x9’x3’ fiberglass cruiser rigged for crab and trolling, built by C&M Manufacturing in 1970. Cummins 6BTA main rated at 210 hp w/ 1,700 hrs. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and...
More Details- Year:
- 1969
- Length:
- 48
- Hull:
- Fiberglass
- Builder:
- Westport
- Location:
- Oregon
48’x14’x5’ fiberglass crabber built by Westport in 1969. John Deere 6076 main rated at 310 hp, w/ approx 3,300 hrs. Twin Disc 509 gear. Noerthern Lights 6 kw genset w/ 8,000 hrs. New stainless rudder, prop, and shaft. (3) fish holds, but packs 4,200 lbs crab in alu...
More Details- Year:
- 1974
- Length:
- 93
- Hull:
- Steel
- Builder:
- Marine Power and Equipment
- Location:
- Alaska
93’x31’ steel combination vessel built in 1974 by Marine Power and Equipment. Lengthened and sponsoned at Duwamish Shipyard in 1991, new wheelhouse by Snow and Co. in 2019. GMC main rated at 940 hp. Twin Disc gear with 6:1 ratio. 232 kW Detroit 50 Series and 125 kW...
More Details- Year:
- 1992
- Length:
- 98
- Hull:
- Fiberglass
- Builder:
- Master Marine, Inc.
- Location:
- Washington
98’x27.5’x12’ fiberglass combination tender/dragger built by Master Marine, Inc in 1992. Cat 3512 rated at 1750 hp w/ top end rebuild in 2017. New Reintjes reduction gear, installed 2022. Cat 3408 300 kW and Cat 3306 150 kW gensets. Packs 300k lbs total in...
More Details- Year:
- 1976
- Length:
- 37
- Hull:
- Fiberglass
- Builder:
- Ferrell
- Location:
- Alaska
37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...
More Details- Year:
- 1973
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Roberts
- Location:
- Alaska
36’x11’x4’ fiberglass troller built in 1973 by Roberts in La Conner, WA. John Deere 6068 main engine rated at 210 hp. Twin Disc 506 gear. Makes 7.5 knots. 300 gallons fuel capacity in (2) tanks. Packs appx 3,500# in (2) holds. Recently reconditioned Kolstrand 3-sp...
More Details- Year:
- 1984
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- La Conner
- Location:
- Alaska
32’x14’x3’ aluminum crabber/longliner combination vessel built by La Conner in 1984. Twin Cummins 6BTA main engines rated at 315 hp each. ZF 2-20 AS gears. Yamaha EF2600 110v portable generator. Deck equipment includes Maritime Fab roller, longline reel with level...
More Details- Year:
- 1976
- Length:
- 63
- Hull:
- Steel
- Builder:
- Mike Brown
- Location:
- Oregon
63’x17.7’x8’ steel combination vessel, rigged for bottom trawling, built by Mike Brown in Port Hueneme, CA. Isuzu UM6WG main rated at 505 hp and Twin Disc 514 gear. PTO drives (2) 60 gpm pumps. John Deere 40 kW genset w/ Vickers 20 gpm pump. Packs 70,000# iced groun...
More Details- Year:
- 1980
- Length:
- 72
- Hull:
- Steel
- Builder:
- Duke's Welding
- Location:
- Oregon
72'x22'x10' steel combination vessel. Monk-design, built by Duke's Welding in 1980. Currently set up as a crabber/shrimper/tuna vessel. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 3...
More Details- Year:
- 1952
- Length:
- 40
- Hull:
- Wood
- Builder:
- Hansen
- Location:
- California
40'x10'x7' double-skinned wood troller/crabber built by Hansen in 1952. GMC 371 main engine rated at 140 hp. Twin Disc 509 marine gear. Packs 3,000# crab in tank, 5,000# deckloaded. Chilled water salmon tank holds 3,000#. Deck equipment includes a 17" Warren Junes...
More Details- Year:
- 1985
- Length:
- 43
- Hull:
- Aluminum
- Builder:
- US Navy
- Location:
- Washington
43’x13’x6’ aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Main engines have been removed. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics includ...
More Details- Year:
- 1982
- Length:
- 25
- Hull:
- Fiberglass
- Builder:
- Farallon
- Location:
- California
25'x8' fiberglass, built in 1982 by Farallon. 325 hp Mercruiser gas, only 2 hrs on engine. 12 gpm hydraulics, electric clutch. 500# fish hold. Crab block, davit, and salmon tree w/ poles. Electronics include GPS, plotter, autopilot, sounder, and (2) VHF. Asking $7...
More Details- Year:
- 1982
- Length:
- 45
- Hull:
- Steel
- Builder:
- Martin Allen
- Location:
- California
45.9'x20'x6.6' steel crabber built by Martin Allen in 1982, completely rebuilt and sponsoned in 2015. Detroit 8v71 rated at 300 hp, rebuilt in 2015. Twin Disc MG 5111. Cummins 40kW genset w/ approx. 2,800 hrs. Packs 22k# crab. 20 ton IMS blast freeze RSW unit. Elec...
More Details- Year:
- 1979
- Length:
- 50
- Hull:
- Steel
- Builder:
- Monk Design
- Location:
- California
50'x15'x8.5' steel combination vessel, rigged for crab and tuna. Monk design, built by W. Robertson in 1979. Cummins main rated at 325 hp. Kubota 30 kW auxiliary. 1,800 gallon fuel capacity in (4) tanks. 10 ton Spray Brine system w/ 5F30 Carrier compressor. Capac...
More Details- Year:
- 1978
- Length:
- 70
- Hull:
- Steel
- Builder:
- Nichols Bros
- Location:
- Alaska
70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 t...
More Details