- Year:
- 1973
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- California
36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...
More Details- Year:
- 1963
- Length:
- 89
- Hull:
- Steel
- Builder:
- Benson B.C.
- Location:
- Washington
89’x24’ steel, salmon tender, built by Star Shipyard LTD (B.C.) in 1963. Cat 379B rated at 500 hp w/ 8k hrs on the rebuild. Cat reduction gear. Cat 3406B aux w/ 30kW genset. Cat 3304B aux w/ 30 kW genset that runs RSW. Packs 330k lbs in (4) insulated fish holds. RS...
More Details- Year:
- 1983
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- North Sound Marine
- Location:
- Alaska
34’x12’ aluminum bowpicker built in 1983 by North Sound Marine. Twin Volvo Penta KADPA main engines rated at 230 hp. Volvo Penta 290DPE outdrives. Packs 12k# in (6) insulated fish holds. (2) additional holds aft. Equipment includes drum with levelwind, power roller,...
More Details- Year:
- 1979
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- American Commercial
- Location:
- Alaska
32’x11.5’ aluminum, flush deck, RSW Bristol Bay boat built by American Commercial in 1979. Volvo 60B main engine rated at 250 hp. Twin Disc MG506 gear with 1.8:1 ratio. Packs 10k# in insulated fish holds. IMS 5-ton RSW system, installed in 2018. Hydraulics all redon...
More Details- Year:
- 1928
- Length:
- 46
- Hull:
- Wood
- Builder:
- Strom & Orum
- Location:
- California
46’x13’x7’ wood troller/crabber with permits, built in 1928 by Strom and Orum in Tacoma, WA. Detroit 671 main rated at 165 hp, w/ 2,500 rebuilt hrs. Twin Disc 509 gear. Perkins 7.5 kW genset. Fish hold packs 24,000# not tanked, 9,000# in crab instert, and 6,000# sal...
More Details- Year:
- 2005
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Custom
- Location:
- California
34’10”x16’x4’ custom aluminum vessel built in 2005, rigged for crab and troll fisheries. John Deere 6068 main rated at 330 hp w/ 8,700 hours. ZF 22A gear. Westerbeke 7.6 kW genset. 260 gallon fuel tank. Tanked fish hold packs 6,000 lbs of crab. Deck equipment incl...
More Details- Year:
- 1986
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Alaska
32’x13’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Rozema in 1986. Detroit 6V92 rated at 430 hp w/ Twin Disc 509 gear. Updated turbo, exhaust, blower and injectors. IMS 7.5 ton RSW w/ (2) zones. Packs 12,500 lbs in (8) fish holds. Sliding Kinematics...
More Details- Year:
- 2021
- Length:
- 19.5
- Hull:
- Aluminum
- Builder:
- Kodiak Marine
- Location:
- Idaho
19.5’x9.5’ aluminum, shallow draft, skiff built by Kodiak Marine in 2021. Cummins 5.9L rated at 300 hp w/ AWT 272 water jet. 10 hours on the engine. Located in Idaho. Seller can transport to Seattle for Buyer. Reduced to $88,000.
More Details- Year:
- 2021
- Length:
- 35
- Hull:
- Aluminum
- Builder:
- North Cross Aluminum, Custom
- Location:
- Alaska
35’x12’x3.5’ custom aluminum crabber, built in 2021. Cummins QSB 6.7 main rated at 480 hp w/ approx. 1,000 hours. ZF286A gear w/ 2.208:1 ratio. 400 gallon fuel capacity. 8” bow thruster. Does 24kts at 3000 rpm. Deck equipment includes 12” Hydroslave block, davit,...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’x2’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Marco in 1980. CAT 3208 rated at 280 hp w/ Twin Disc gear. PacWest 7.5 ton RSW. Packs 9,400 lbs in (6) insulated fish holds. Updated SeaMar drum drive, Maritime Fab stern roller, and PBI/Holms lev...
More Details- Year:
- 1993
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Peregrine
- Location:
- Alaska
32’x15.5’x22” aluminum, triple jet, Bristol Bay boat built by Peregrine in 1993. (2) rebuilt, keel cooled, Volvo 72WJ each rated at 450 hp w/ rebuilt DOEN 130 jets and ZF 301 gears. Center mount, raw water cooled, Volvo TAMD 63P rated at 370 hp w/ Hamilton 291 jet. Spl...
More Details- Year:
- 1967
- Length:
- 57
- Hull:
- Steel
- Builder:
- Don Larsen
- Location:
- Washington
57’x18’ steel tuna vessel built by Don Larsen in 1967. GMC 671 main engine rated at 200 hp. Tonanco 729 gear. 4k gallons fuel capacity. 35 kW Isuzu 4BG1 and 6 kW Yanmar gen sets. Packs 40k# in (1) fish hold, blast-frozen. Includes tuna pullers and safety equipme...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’x3’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Marco in 1980. Cat 3208 rated at 425 hp w/ Twin Disc 507 gear. IMS 8.5 ton system new in 2017. Packs 11k lbs in (9) zoned fish holds. 6 and 4.2 cube load sensing hydraulic pumps. Power steering....
More Details- Year:
- 1964
- Length:
- 43
- Hull:
- Wood
- Builder:
- Snitchuk Boats
- Location:
- Alaska
43’x11.5’x5’ troller built by Snitchuk Boats in 1964. John Deere 6086 w/ 175 hp. Twin Disc 507 2:1 gear ratio. New control panels, inverter and wiring throughout in 2016. 10 Kw auxiliary. Plate freezer. Packs approx. 14k lbs in fiberglass insulated fish hold....
More Details