CR23-008

$180,000
Year:
1974
Length:
38
Hull:
Fiberglass
Builder:
Ledford
Location:
Oregon

CR23-008

38’x13’x4.2’ fiberglass 1974 Ledford seiner rigged for crab, gillnet, and seine. John Deere 6068T main rated at hp w/ Twin Disc 506 gear. 450 gallon fuel capacity in (2) tanks. Packs 7,000 lbs crab in tanked middle hold, plus two un-tanked holds outside. Deck equip...

More Details

BB23-014

$260,000
Year:
1988
Length:
32
Hull:
Aluminum
Builder:
Kvichak
Location:
Alaska

BB23-014

32’x13’ aluminum, Kvichak Bristol Bay gillnetter built in 1988. Volvo TAMD 63P-A rated at 370 w/ ZF301A gear. Bow thruster. Packs 11k lbs in (8) insulated fish holds. Rebuilt 200 ftm net reel, Poclain P-8 internal drum drive, Maritime Fab levelwind and stern roller....

More Details

CR23-006

$800,000
Year:
1990
Length:
54
Hull:
Fiberglass
Builder:
Little Hoquiam
Location:
Washington

CR23-006

54.9’x17’x10.5’ fiberglass Little Hoquiam built in 1990, rigged for crab and seine. Cummins 855NA main rated at 425 hp, w/ Tonanco TN-7295 gear. John Deere 4045 65kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Packs 41,000 lbs of crab, or 80,000 lbs of salm...

More Details

CR23-007

$75,000
Year:
1973
Length:
36
Hull:
Fiberglass
Builder:
Modutech
Location:
California

CR23-007

36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...

More Details

TE23-003

$750,000
Year:
1963
Length:
89
Hull:
Steel
Builder:
Benson B.C.
Location:
Washington

TE23-003

89’x24’ steel, salmon tender, built by Star Shipyard LTD (B.C.) in 1963. Cat 379B rated at 500 hp w/ 8k hrs on the rebuild. Cat reduction gear. Cat 3406B aux w/ 30kW genset. Cat 3304B aux w/ 30 kW genset that runs RSW. Packs 330k lbs in (4) insulated fish holds. RS...

More Details

BB23-013

$150,000
Year:
1979
Length:
32
Hull:
Aluminum
Builder:
American Commercial
Location:
Alaska

BB23-013

32’x11.5’ aluminum, flush deck, RSW Bristol Bay boat built by American Commercial in 1979. Volvo 60B main engine rated at 250 hp. Twin Disc MG506 gear with 1.8:1 ratio. Packs 10k# in insulated fish holds. IMS 5-ton RSW system, installed in 2018. Hydraulics all redon...

More Details

TR23-005

$150,000
Year:
1965
Length:
42
Hull:
Wood
Builder:
Remen
Location:
Oregon

TR23-005

42’x12’x7’ wood troller/crabber with permits, built by Remmen in 1965. Detroit v6-71 main rated at 165hp w/ Capital gear. Fuel capacity of 800 gallon in (4) tanks. Fiberglassed fish hold packs 8 tons iced tuna, and 8k lbs crab in insert. Deck equipment includes 19” J...

More Details

BB23-010

$130,000
Year:
1989
Length:
32
Hull:
Fiberglass
Builder:
Wesley
Location:
Alaska

BB23-010

32’x13’x5’ fiberglass, RSW Bristol Bay gillnetter, built by Wegley in 1989. CAT 3126 main rated at 425 hp, w/ 6,500 hours. Twin Disc 507 gear. Fuel capacity of 350 gallons in (2) tanks. Packs 9,000 lbs in (5) insulated fish holds. PacWest 7.5-ton RSW system. Articu...

More Details

BB23-011

$30,000
Year:
1978
Length:
32
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

BB23-011

32’x11.5’ aluminum, Bristol Bay, Shore boat built in 1978. Recently installed Cummins 6BT engine rated at 315 hp. Makes 15 knots. Updates include new fuel lines, cleaned fuel tanks, new Twister drive, deck valve bank, anchor line, batteries, prop, exhaust wrap and re...

More Details

LC23-003

$1,450,000
Year:
2011
Length:
62
Hull:
Aluminum
Builder:
Armstrong Marine
Location:
Alaska

LC23-003

62’x18.3’x3’ aluminum, jet propulsion landing craft, passenger, and freight vessel, built by Armstrong Marine in 2011. (3) Scania DI12 66M mains rated at 650 hp each, low hours. ZF 325-1 gears, Ultra Jet 410 jets w/new controls system. Makes 25 knots, light. Burns 2...

More Details

SE23-001

$250,000
Year:
1946
Length:
56
Hull:
Wood
Builder:
Grandy
Location:
Washington

SE23-001

56’x16.5’x 8’ wood seiner built in 1946 by Grandy. Detroit 871 rated at 350 hp w/ Twin Disc gear. Burns 5 gph at 8.5 knots. Isuzu 40 kW auxiliary. Packs 65k lbs in (2) fiberglass fish holds. RSW w/ 18 ton compressor. Rowe deck winch w/ E-Stop, Marco 26” pwr block...

More Details

SP23-003

$190,000
Year:
1990
Length:
42
Hull:
Fiberglass
Builder:
Polar Boat Works
Location:
Alaska

SP23-003

42’x14.5’x4’ fiberglass gillnetter built by Polar Boat Works, AK in 1990. John Deere 6081AFM75 rated at 375 hp w/ Twin Disc 5111. Lugger Northernlights 5.5 kW genset. Makes 10 knots at 9.5 gph fuel consumption. Packs 30,000 in (3) insulated fish holds. Aluminum art...

More Details

BB23-008

$280,000
Year:
1979
Length:
32
Hull:
Aluminum
Builder:
Johns Little Shipyard
Location:
Alaska

BB23-008

32’x12.5’x32” aluminum, RSW, flush deck, BB gillnetter built by Johansen Shipyard in 1979 and repowered by Astoria Marine in 2020. (2) new Cummins 5.9L each rated at 375 hp w/ (2) new ZF-301 reduction gears. (9) fish holds back 9k lbs. PacWest 8.5 ton RSW. Sliding r...

More Details

CO23-001

$200,000
Year:
1967
Length:
39
Hull:
Fiberglass
Builder:
Thermodyne
Location:
California

CO23-001

38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...

More Details

TR23-004

$55,000
Year:
1928
Length:
46
Hull:
Wood
Builder:
Strom & Orum
Location:
California

TR23-004

46’x13’x7’ wood troller/crabber with permits, built in 1928 by Strom and Orum in Tacoma, WA. Detroit 671 main rated at 165 hp, w/ 2,500 rebuilt hrs. Twin Disc 509 gear. Perkins 7.5 kW genset. Fish hold packs 24,000# not tanked, 9,000# in crab instert, and 6,000# sal...

More Details

CR23-004

$165,000
Year:
2005
Length:
34
Hull:
Aluminum
Builder:
Custom
Location:
California

CR23-004

34’10”x16’x4’ custom aluminum vessel built in 2005 and significantly updated in 2016, rigged for crab and troll fisheries. John Deere 6068 main rated at 330 hp w/ 8,700 hours. ZF 22A gear. Westerbeke 7.6 kW genset. 260 gallon fuel tank. Tanked fish hold packs 6,000...

More Details

BP23-001

$250,000
Year:
1983
Length:
41
Hull:
Aluminum
Builder:
Marine Hydraulics
Location:
California

BP23-001

41’x14’x27” aluminum, bowpicker built by Marine Hydraulics and Fabrication in 1983. Reported to make 28 knots. (2) Yanmar 6LY2M-WDT each rated at 375 hp w/ ZF R-350 gears, installed by Hatton Marine in 2015. Rebuilt Hamilton 1031 water jets. Kubota D1105E auxiliary...

More Details

SP23-002

$150,000
Year:
1978
Length:
41
Hull:
Aluminum
Builder:
Sea Venture
Location:
Alaska

SP23-002

41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...

More Details

BB23-006

$60,000
Year:
1980
Length:
32
Hull:
Fiberglass
Builder:
Mel Martin
Location:
Alaska

BB23-006

32’x12’x30” fiberglass, flush deck, Bristol Bay gillnetter built by Mel Martin in 1980. Cummins 6BTA rated at 220 hp w/ Newage gear. (10) insulated and plumbed fish holds pack 8k lbs combined. Hydraulic Maritime Fab stern roller and new Maritime Fab drum. 120 g...

More Details

TE23-001

$285,000
Year:
1931
Length:
71
Hull:
Wood
Builder:
Unknown
Location:
Alaska

TE23-001

71’x19’ wood tender vessel built in 1931 by Menchins. Caterpillar 343A main engine rated at 365 hp, rebuilt in 2018. Caterpillar 5L3968 gear with 6:1 ratio. Burns 8 gph at 8 knots. 2200 gallons fuel capacity in (2) tanks. Low-hours GMC 471 auxiliary w/PTO and new g...

More Details

TR23-001

$185,000
Year:
1987
Length:
54
Hull:
Fiberglass
Builder:
Schoeppe & Aadsen
Location:
Alaska

TR23-001

54’x15.6’x6’ fiberglass, double ended troller, built in 1987. Rebuilt Detroit 671 rated at 185 hp w/ new exhaust. Twin Disc 509 gear w/ trolling valve. Mitsubishi 30 kw genset. Single fish hold packs 28,000 lbs of blast frozen tuna. Refurbished blast freeze system w...

More Details

CR23-002

$395,000
Year:
2021
Length:
34
Hull:
Aluminum
Builder:
Svendsen
Location:
Alaska

CR23-002

34’x12’x2’ new aluminum Svendsen built in 2021, rigged for crab, shrimp, and longline. Twin Honda 225hp outboards w/ 190 hours each. Cruises at 25kts, and does 44kts WOT. Fuel tank holds 340 gallons. (4) fish holds pack a reported 5,000 lbs. Deck equipment includes...

More Details

CR23-001

$375,000
Year:
1967
Length:
53
Hull:
Steel
Builder:
Wilwerding
Location:
California

CR23-001

53.1’x14.7’x8’ steel crabber/troller combo vessel, built in 1967 by Wilwerding. 250 hp Cummins 855 main w/ Twin Disc 509 gear. Isuzu C240 20kw genset. Fuel capacity of 2,600 gallons in (3) tanks. Fish hold packs 20 tons tuna, and has 10k lb crab tank insert. Spray...

More Details

CH23-001

$39,000
Year:
1972
Length:
33
Hull:
Fiberglass
Builder:
Westport
Location:
Washington

CH23-001

33’x11’x5’ fiberglass Westport charter vessel built in 1972. John Deere 6068 main rated at 225 hp w/ Twin Disc 506A gear. Fuel capacity of 240 gallons in (2) fiberglass tanks. Cruises at 11-12 knots. Electronics include Garmin 192C GPS/plotter/sounder, Garmin 3010C...

More Details

BB23-001

$499,000
Year:
2016
Length:
32
Hull:
Fiberglass
Builder:
Freestyle Marine
Location:
Alaska

BB23-001

32’x14’ fiberglass Bristol Bay gillnetter, built by Freestyle Marine in 2016. Caterpillar 12.9 liter main engine rated at 1,000 hp. Approx 3,000 hrs on main. Twin Disc MG-5114SC gear with 1.5:1 ratio. Makes 33 knots WOT.  600 gallons fuel capacity. Pack...

More Details

BB23-003

$45,000
Year:
1971
Length:
32
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

BB23-003

32’x11’x2.5’ aluminum, RSW, Bristol Bay gillnetter, built by Shore in 1971. Cummins BT6 main rated at 250 hp w/ Newage reduction gear. 4-blade stainless prop, dripless bearing.  Vickers V20 hydraulic pump. PacWest 5.5-ton RSW system. Packs 14,000 lbs in (8)...

More Details

LL22-006

$350,000
Year:
1973
Length:
52
Hull:
Steel
Builder:
Monk
Location:
Alaska

LL22-006

52’x16’x6’ Monk designed Cor-Ten steel longliner/troller, built by Port Angeles Shipyard in 1972. Twin Cummins 6BT 5.9L mains rated at 120hp each. Twin Disc 506-1 gears. 15kw Isuzu genset. (2) Vickers variable speed hydarulic pumps. Insulated fish hold packs 30,000...

More Details

LL22-005

$149,000
Year:
1945
Length:
69
Hull:
Wood
Builder:
Hanson
Location:
Washington

LL22-005

69’x18’ wood longliner built by Hanson Boat Co. in 1945. Caterpillar 353 main engine rated at 425 hp, installed in 2022. Twin Disc 521 gear with 4:1 ratio. Cruises at 9.5 knots. 30 kW Kubota and 18 kW Yanmar gensets. 3600 gallons fuel capacity in (4) tanks. Packs...

More Details

TR22-024

$300,000
Year:
1977
Length:
47
Hull:
Fiberglass
Builder:
Sunnfjord
Location:
California

TR22-024

47.5’x14’x5.5’ fiberglass freezer troller, crabber, and tuna vessel, built by Sunnfjord in 1977. John Deere 6068 main rated at 200 hp w/ Twin Disc 509 gear. Isuzu 4-cyl aux w/ backup hydraulic system. Insulated fish hold packs 12k-14k frozen at sea salmon. Thermokin...

More Details

BB22-055

$97,000
Year:
1980
Length:
32
Hull:
Fiberglass
Builder:
Chinook
Location:
Alaska

BB22-055

32’x11’x33” fiberglass, RSW, Bristol Bay gillnetter, built in 1980 by Chinook. IMS 7.5 ton RSW system. 8” HPS bow thruster. Cat 3208 rated at 425 hp w/ Twin Disc 507 gear. Articulating aluminum drum, (4) shackle capacity, Kinematic power roller. 6 cube Vickers for...

More Details

Sign up for email updates