CR22-005

$375,000
Year:
1968
Length:
36
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

CR22-005

36’x11’x5’ aluminum Shore built in 1968, INCLUDING CA 400 pot crab permit good to 69’10” mloa. Crusader 454 main rated at 350 hp, w/ less than 500 hours. Insulated fish hold packs 16,000 lbs. Deck equipment includes net reel and power roller. Electronics include GPS...

More Details

TN22-001

$250,000
Year:
1967
Length:
57
Hull:
Steel
Builder:
Don Larsen
Location:
Washington

TN22-001

57’x18’ steel tuna vessel built by Don Wells in 1967. GMC 671 main engine rated at 200 hp. Tonanco 729 gear. 4k gallons fuel capacity. 35 kW Isuzu 4BG1 and 6 kW Yanmar gen sets. Packs 40k# in (1) fish hold, blast-frozen. Includes tuna pullers and safety equipmen...

More Details

SE22-001

$350,000
Year:
1943
Length:
54
Hull:
Wood
Builder:
Hanson
Location:
Washington

SE22-001

54’x15’ wood seiner built in 1943 by Hanson. GMC 871 main engine rated at 250 hp. Twin Disc MG514 gear. Mitsubishi 45 kW gen set. 1k gallons fuel capacity in (2) tanks. Packs 50k# pinks in (2) fish holds. 20 ton Cold Sea RSW system. Deck equipment includes self-pursing...

More Details

TE22-003

$600,000
Year:
1988
Length:
65
Hull:
Steel
Location:
Mexico

TE22-003

65’x20’x6’ steel, combination tender/crabber built in 1988 in San Leon, TX. Detroit 12V71 rated at 580 hp. Detroit 4DT w/ 60 kW and Cummins 4BT w/ 25 kW auxiliaries. 40 ton RSW system. Insulated fish hold packs approx. 100k lbs salmon. 19’ steel picking boom and 36...

More Details

BB22-005

$63,000
Year:
1978
Length:
32
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

BB22-005

32’x11.5’x36” aluminum, RSW, Bristol Bay, Shore boat built in 1978. Perkins 225 Sabre rated at 225 hp. Twin Disc 506 gear. Diesel drive IMS 8.5 ton RSW, new in 2021. Packs 10k lbs in (6) fish holds. Articulating reel, w/ Twister drive, levelwind and Kinematics ster...

More Details

CO19-019

$1,500,000
Year:
1990/2017
Length:
58
Hull:
Steel
Builder:
Martin Allen Design
Location:
Oregon

CO19-019

58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna.  Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017.  Cummins K19 main rated at 600 hp, new in 2017.  Twin Disc gear.  100kW and 65kW...

More Details

BB22-001

$60,000
Year:
1979
Length:
32
Hull:
Aluminum
Builder:
Tacoma Boat Works
Location:
Alaska

BB22-001

32’x13’x3’ aluminum, RSW, Bristol Bay gillnetter built by Tacoma Boat Works in 1979. Volvo TAMD 62 rated at 335 hp w/ apprx. 4k hrs and ZF300 gear. Packs 12k lbs in (5) fish holds. Vickers 6 and 4 cube hydraulic pumps. Coastal Marine RSW w/ Thermo King compressor....

More Details

BB22-002

$155,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Midland
Location:
Alaska

BB22-002

32’x12’x3’ fiberglass, RSW, flush deck, Bristol Bay gillnetter built by Midland in 1979 and rebuilt in 2017. Volvo 71B rated at 386 hp w/ low hours, updated turbo and SS exhaust. Twin Disc 507 gear. IMS 7.5 ton RSW new in 2017. Maritime Fab. reel, auto levelwin...

More Details

CH21-004

$325,000
Year:
1970
Length:
34
Hull:
Fiberglass
Builder:
Bertram and Serka Welding
Location:
Alaska

CH21-004

34’9”x13’x32” fiberglass hull built by Bertram in 1970 and extensively rebuilt in 2017. Twin Cummins 6BTA 5.9 M3 each rated at 370 hp installed in 2020. Twin ZF220A gears. Improvements include new engines, reinforced engine stringers, aluminum tank insert, anchor gea...

More Details

BB21-059

$100,000
Year:
1982
Length:
32
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

BB21-059

32’x11’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Shore in 1982. Ford/International engine rated at 150 hp w/ ZF gear. Kinematic articulating reel w/ Rexroth drive and levelwind. IMS 7.5 ton RSW system. (8) fish holds combined w/ (4) insulated w/ fo...

More Details

BB21-055

$50,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

BB21-055

32’x12’ fiberglass, flush deck, gillnetter built by Roberts in 1979. Volvo 70D at 270 hp. Twin Disc 506 reduction gear. (2) updated fuel tanks and water tank. Packs 16,000 lbs in fish holds. Load sensing hydraulics. Kinematic drum drive and stern roller. Electro...

More Details

CR21-023

$110,000
Year:
1980
Length:
30
Hull:
Fiberglass
Builder:
Wilson
Location:
California

CR21-023

30’x10’x2’ fiberglass Wilson dive boat built in 1980, rigged for crab. 315 hp Cummins 6BT main w/ only 250 hrs, installed Jan 2020. Bravo II outdrive. Fuel capacity of 150 gallons in (2) tanks. Packs approximately 2,000 lbs in (2) glassed fish holds, with room for to...

More Details

PS21-004

$235,000
Year:
1993
Length:
42
Hull:
Aluminum
Builder:
Thompson Bros.
Location:
British Columbia

PS21-004

42’x12’x3’ aluminum whale watch vessel built in 1993 by Thompson Bros. Volvo TAMD 71B main engine rated at 400 hp. Makes 25 knots fully loaded at 11 gph fuel consumption. 450 gallons fuel capacity in (1) tank. Heated house with galley and marine head. 25-man Servit...

More Details

TR21-022

$45,000
Year:
1994
Length:
32
Hull:
Fiberglass
Location:
California

TR21-022

32’x10’ fiberglass troller built in 1994. Volvo Penta main rated at 280 hp w/ 4,200 hrs. Volvo duo-prop outdrive. Fuel capacity of 120 gallons in one tank. Cruises at 12 kts. Packs 2,000 lbs in (2) insulated fish holds. Fully rigged for trolling, including 3-spool...

More Details

DR21-004

$250,000
Year:
1946
Length:
42
Hull:
Wood
Builder:
John's Boatshop
Location:
California

DR21-004

42’x12.5’x5.6’ wood combination vessel rigged for trawl and salmon troll, built in 1946 at John’s Boatshop, Wilmington, CA. John Deere 6081 main rated at 230 hp and Tonanco gear w/ 3:1 ratio. Cruises at 7.5-8 kts and burns 2.5 gal/hr. Northern Lights 6kw genset. Fis...

More Details

LL21-005

$950,000
Year:
1944
Length:
180
Hull:
Steel
Builder:
Higgens
Location:
Washington

LL21-005

180’x32’x15’, twin-screw freezer longliner built in 1944 by Higgins Industres Inc. Built to ABS qualifications and currently maintained to load-line and class specifications. Converted to a freezer/longliner in 1991 by Foss Shipyard. Twin Caterpillar 3412 main engines...

More Details

BB21-048

$150,000
Year:
1994
Length:
32
Hull:
Aluminum
Builder:
Kvichak
Location:
Alaska

BB21-048

32’x12.3’ aluminum, RSW, flush deck, gillnetter, built by Kvichak in 1994. Recently installed Lugger 6108 rated at 300 hp and Twin Disc 506 gear both w/ low hours. IMS 7.5 ton RSW. 6 and 4 cube direct drive hydraulic pumps. (5) insulated fish holds pack 11k lbs comb...

More Details

CO21-008

$925,000
Year:
2021
Length:
45
Hull:
Fiberglass
Builder:
Millennium Marine
Location:
Washington

CO21-008

45’x16’x5’ fiberglass, combination crabber/gillnetter built in 2021. Millennium Marine 45 hull. John Deere 6135 SFM85 rated at 750 hp w/ Twin Disc 5126. 18 kts WOT and 10 kts cruise. Aluminum roof, free standing mast, and 16’ boom. Getec 7.5 kW hydraulic generator....

More Details

SE21-010

$690,000
Year:
1977
Length:
58
Hull:
Fiberglass
Builder:
Kettenberg Marine
Location:
Alaska

SE21-010

57’x20’x7.5’ fiberglass seiner/combination vessel built in 1977 by Kettenberg Marine in Point Loma, CA. Cat 3406 main engine rated at 425 hp. Twin Disc MG5114 gear, new in 2019. Isuzu 60kW and 40kW gen sets. 3,700 gallons fuel capacity. Packs 100k# in (4) fish holds....

More Details

CR21-026

$300,000
Year:
1966
Length:
36
Hull:
Aluminum
Builder:
Matsumoto
Location:
Oregon

CR21-026

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Rebuilt Cummins 6BTA rated at 315 hp w/ 2k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold. Hydraulic davit, 15” Junes block and bins for crab tank. Vickers 24 GPM hydraulic...

More Details

SP21-007

$90,000
Year:
1979
Length:
38
Hull:
Fiberglass
Builder:
Marbin
Location:
Alaska

SP21-007

38’x12’x5’ fiberglass gillnetter built by Marbin in 1979. Deere 6068TFM75 main engine rated at 200 hp. Twin Disc gear with 2:1 ratio. Troll valve on reduction gear. Makes 7 knots at (3) GPH. 400 gallons fuel capacity. Packs 8k# in (7) insulated fish holds. Electr...

More Details

CR21-025

$100,000
Year:
1965
Length:
36
Hull:
Aluminum
Builder:
Matsumoto
Location:
Oregon

CR21-025

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Recently upgraded Cummins 6BTA rated at 315 hp w/ 1k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold w/ insert. Hydraulic davit, 17” Junes block and dump box. Vickers 24...

More Details

CR21-021

$110,000
Year:
1978
Length:
30
Hull:
Fiberglass
Builder:
Wilson
Location:
California

CR21-021

30’x10’x3’ fiberglass Wilson built in 1978, rigged for nearshore and longline. Cummins QSL 8.9 main rated at 405 hp w/ 5,300 hours. ZF 280 V-Drive w/ 1.56:1 ratio. Fish hold capacity of 2,500 lbs + 1,000 lbs ice. Deck equipment includes 15” Warren Junes hauler, (2)...

More Details

TR21-018

$60,000
Year:
1952
Length:
40
Hull:
Wood
Builder:
Triple & Everett
Location:
California

TR21-018

40’x12’x6’ wood troller built in 1952 by Triple & Everett. GMC 371 main engine rated at 110 hp. Twin Disc 5061 gear. Makes 7 knots. 500 gallons fuel capacity in (2) new stainless tanks. Packs 10k# salmon in (1) fish hold. New hatch, recaulk, and refastening done i...

More Details

TR21-015

$80,000
Year:
1986
Length:
47
Hull:
Wood
Builder:
Thames
Location:
Oregon

TR21-015

47’x13’x6’ wood freezer troller rigged for salmon and tuna, built 1986 by Thames Boat Works (Canada). CAT 3306 main rated at 170 hp w/ Twin Disc 509 gear. Fuel capacity of 1,000 gallons in (2) tanks. Blast freeze unit w/ 05GX Carrier compressor. Fish hold packs 20,0...

More Details

CR21-017

$225,000
Year:
1970
Length:
38
Hull:
Fiberglass
Builder:
Hoquiam
Location:
California

CR21-017

38.5’x13’x5’ fiberglass Hoquiam crabber/troller built in 1970. Detroit 653 main rated at 150 hp w/ Twin Disc gear. 3kw Honda genset. Fuel capacity of 500 gallons in (2) tanks. Packs 12,000 lbs frozen tuna. Blast freeze system w/ Carrier 5f-30 compressor.  Rece...

More Details

BB21-043

$20,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Rawson
Location:
Alaska

BB21-043

32’x10.8’ Rawson, combo cabin with fly bridge, built in 1979. CAT 3208T main rated at 275 hp w/ 6,749 hours. Twin Disc 506 gear. Fuel capacity of 200 gallons in (2) tanks. Vickers belt driven hydraulic pump. Packs 9,000 lbs in slush bags. Kinematic reel w/ Twister...

More Details

TR21-013

$29,000
Year:
1940
Length:
40
Hull:
Wood
Builder:
Bremerton
Location:
California

TR21-013

40’x11’ wood troller built by Bremerton in 1940. Detroit 471 main engine rated at 135 hp. Makes 7 knots, burns 2.5 gph. 180 gallons fuel capacity. Packs 5 tons in (1) insulated hold. Deck equipment includes a longline puller, crab block, tuna pullers, and 3-spool g...

More Details

TN21-005

$215,000
Year:
1953
Length:
62
Hull:
Steel
Builder:
National Steel and Shipbuilding
Location:
Oregon

TN21-005

62’x18’ steel tuna/tender vessel originally built by National Steel and Shipbuilding for the US Army in 1953. GMC 8V71 rated at 350 hp, low hours. Twin Disc 509 with 4:1 ratio. 40 kW John Deere gen set. Packs 60k# in RSW, 40k# frozen. 18 ton IMS chiller. Jerry Resl...

More Details

BB21-039

$60,000
Year:
1982
Length:
32
Hull:
Aluminum
Builder:
Shore
Location:
Alaska

BB21-039

32’x12’ aluminum, flush deck, RSW, Bristol Bay boat built by Shore in 1982. Cummins main engine rated at 200 hp. ZF gear with 1.5:1 ratio. Makes 8 knots. Packs 10k# in (8) insulated holds. Pac West 7.5 ton RSW system. Articulating drum, power roller, new brailer...

More Details

Sign up for email updates