Vessels - Crabbers

104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...

85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....

42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...

29.4’x12.3’ fiberglass crabber built by Modutech in 1979. Cat 3208 rated at 300 hp. Mitsubishi 19 kW auxillary. Single hold packs 4000 lbs crab. Includes crab block and hydraulic davit. Electronics include multi system display w/ GPS, plotter, radar and sounder. I...

44’x13’3”x8’8” fiberglass troller built by C&M in 1987. John Deere 6414 main rated at 150 hp w/ Twin Disc 506 gear, both rebuilt in 2019. Fuel capacity of 600 gallons in (2) tanks. Tanked and insulated fish hold packs 15,000 lbs iced, with (2) 2,000 lb slush tanks on...

48’x14.3’x9.5’ steel crabber and tuna vessel built in 1967 in Richmond, CA. 8.3 Cummins main rated at 220 hp w/ Twin Disc 509 gear. Isuzu 4LE2 aux for RSW/ hydraulics and Isuzu 20kw genset. Fuel capacity of 1,600 gallons in (2) steel tanks. 20-ton spray brine sy...

36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...

41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...

65’x20’x9’ wood Canadian crabber/troller built by Frostad in 1974. Detroit 12V71 main rated at 350 hp w/ Twin Disc gear. 20kw John Deere and 30kw Detroit 3V71 gensets. Packs 100,000 lbs salmon in (4) tanked/insulated holds. Includes all deck equipment for crab and s...

52’x15’x7’ steel combination vessel rigged for crab, tuna, salmon, longline, and built by leo H. Bohn in 1977. Detroit 871 main rated at 325 hp w/ Twin Disc 509 gear. 65kw John Deere genset. Spray brine system w/ 15-ton compressor. Fish hold packs 50,000 lbs tuna, a...

58’x18.3’x9.3’ steel combination vessel rigged for pots, longline and tendering. Built by Marco in 1974. Cummins KT-19-M rated at 425 hp w/ Twin Disc 514 reduction gear. John Deere 4045 w/ 55kW and Sahabu w/ 22kW gensets. Packs 98k lbs in (2) insulated fish holds....

39’3”x12’x4’ wood troller/crabber with permits, built in North Bend, OR in 1967. John Deere main rated at 175 hp w/ approx 3,300 hours. Twin Disc 5050SC gear. 440 gallon fuel capacity in (2) tanks. Briggs & Stratton gas generator. Fish hold packs 5,000 lbs. Includ...

38’x15’x3’ aluminum crabber/troller built by Ed Wing in 1998. Cummins 8.3 main rated at 330 hp w/ 2,000 hours. Twin Disc 507 gear. 600 gallon fuel capacity in (2) tanks. Fish hold packs 10,000 lbs crab. Deck equipment includes crab block, davit, dump box, longline...

35’x12’x3.5’ custom aluminum crabber, built in 2021. Cummins QSB 6.7 main rated at 480 hp w/ approx. 1,000 hours. ZF286A gear w/ 2.208:1 ratio. 400 gallon fuel capacity. 8” bow thruster. Does 24kts at 3000 rpm. Deck equipment includes 12” Hydroslave block, davit,...

150’x38’x16’ steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds, extensiv...

48’x14’x7.7’ steel crabber, Troyer design, built by St. Clair in 1978. Isuzu UM6Hk1 rated at 350 hp w/ Twin Disc 509 gear. Isuzu 20kW genset. (2) insulated fish holds pack approx. 40k lbs salmon. Recent work includes blasted/painted hull, lazarette, boom and new wat...

33.5’x12’ aluminum bowpicker/longliner built in 1988 by J&H Boatworks. Twin Volvo D6330A main engines rated at 330 hp each. Cruises at 25 knots. 200 gallons fuel capacity in (2) tanks. Packs 18k#. Full galley and marine head. Deck equipment includes drum and power...

36’x11’x5’ aluminum Shore built in 1968, INCLUDING CA 400 pot crab permit good to 69’10” mloa. Crusader 454 main rated at 350 hp, w/ less than 500 hours. Insulated fish hold packs 16,000 lbs. Deck equipment includes net reel and power roller. Electronics include GPS...

65’x20’x6’ steel, combination tender/crabber built in 1988 in San Leon, TX. Detroit 12V71 rated at 580 hp. Detroit 4DT w/ 60 kW and Cummins 4BT w/ 25 kW auxiliaries. 40 ton RSW system. Insulated fish hold packs approx. 100k lbs salmon. 19’ steel picking boom and 36...

30’x10’x2’ fiberglass Wilson dive boat built in 1980, rigged for crab. 315 hp Cummins 6BT main w/ only 250 hrs, installed Jan 2020. Bravo II outdrive. Fuel capacity of 150 gallons in (2) tanks. Packs approximately 2,000 lbs in (2) glassed fish holds, with room for to...

45’x16’x5’ fiberglass, combination crabber/gillnetter built in 2021. Millennium Marine 45 hull. John Deere 6135 SFM85 rated at 750 hp w/ Twin Disc 5126. 18 kts WOT and 10 kts cruise. Aluminum roof, free standing mast, and 16’ boom. Getec 7.5 kW hydraulic generator....

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Rebuilt Cummins 6BTA rated at 315 hp w/ 2k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold. Hydraulic davit, 15” Junes block and bins for crab tank. Vickers 24 GPM hydraulic...

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Recently upgraded Cummins 6BTA rated at 315 hp w/ 1k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold w/ insert. Hydraulic davit, 17” Junes block and dump box. Vickers 24...

38.5’x13’x5’ fiberglass Hoquiam crabber/troller built in 1970. Detroit 653 main rated at 150 hp w/ Twin Disc gear. 3kw Honda genset. Fuel capacity of 500 gallons in (2) tanks. Packs 12,000 lbs frozen tuna. Blast freeze system w/ Carrier 5f-30 compressor.  Rece...

27’x10’x2’ fiberglass Boston Whaler built in 1988, rigged for nearshore fishing and longline. Twin Honda BF250 hp outboards w/ only 900 hours. Cruises at 22 kts, and 30+ kts WOT. 300 gallon fuel capacity in (3) tanks. Honda powerpack runs Warren Junes 15” hauler, Hy...

32’x11’x3.5’ fiberglass over wood troller built in 1982 by Gary Morris. GMC 353T main engine rated at 175 hp. Burns 2.5 GPH.makes 7 knots. 150 gallons fuel capacity in (2) tanks. 3650 watt gas generator. Packs 1200# tank in, 3k# dry. Deck equipment includes Junes...

28.6’x9’x3’ fiberglass cruiser rigged for crab and trolling, built by C&M Manufacturing in 1970. Cummins 6BTA main rated at 210 hp w/ 1,700 hrs. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and...

93’x31’ steel combination vessel built in 1974 by Marine Power and Equipment. Lengthened and sponsoned at Duwamish Shipyard in 1991, new wheelhouse by Snow and Co. in 2019. GMC main rated at 940 hp. Twin Disc gear with 6:1 ratio. 232 kW Detroit 50 Series and 125 kW...

37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...

32’x14’x3’ aluminum crabber/longliner combination vessel built by La Conner in 1984. Twin Cummins 6BTA main engines rated at 315 hp each. ZF 2-20 AS gears. Yamaha EF2600 110v portable generator. Deck equipment includes Maritime Fab roller, longline reel with level...