Vessels - Crabbers

100’x25’x12’ steel, tender/crabber built by Toche Enterprises Inc in 1973. Converted to a Bering Sea crabber and lengthened 10’ in 1975. Detroit 16V71 rated at 480 hp w/ Capitol HPC10500 gear w/ 6:1 ratio. (2) Detroit 671 135 kW and Yanmar 45 kW. Packs 210k lbs salm...

58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...

56’x17’x8’ steel longliner/crabber built in 1964 by JM Martinac. John Deere 6125AFM75 main engine rated at 340 hp. Twin Disc MG516 gear with 4.5:1 ratio. 65 kW John Deere 4045TF genset. 2,800 gallons fuel capacity. Nshaft and bearings in 2022. Packs 65,000 salmon...

65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...

38’x11.4’x5’ wooden troller/crabber built in 1970 in Longview, WA. Perkins 6354 rated at 140 hp w/ Capitol gear. PTO connected with Pitts Clutch connected to 36 GPM hydraulic pump. Kolstrand (3) spool salmon gurdies, Junes crab block, trolling cockpit and anchor winc...

42’x13.9’x6’ fiberglass Delta built in 1974, rigged for spot prawns, salmon, and as a squid light boat. Volvo D-12 main rated at 450 hp. Twin Disc gear w/ 2:1 ratio. Kubota 18kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Fish hold packs 14 tons. Deck equi...

34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...

41’x15’x5’ wood troller built in 1970 in Longview, WA. Includes CA salmon troll permit and 250 pot CA crab permit. Cummins 290 main engine rated at 180 hp. Twin Disc 509 gear. Burns 5 gph at 7 knots. Packs 4,500# of crab in (1) fish hold with aluminum insert. Deck...

56’x16’x7’ steel purse seiner, Monk design, built in 1982. Detroit 871 rated at 350 hp w/ 4850 hrs on the rebuild. Perkins auxiliary runs hydraulic RSW system. Packs 75k lbs in (2) insulated fish holds. RSW w/ 18 ton compressor. Marco power block w/ gripper, deck w...

66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. Twin John Deere gen sets, 65 kW and 45 kW, recently installed. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 26-ton...

39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furuno radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California...

104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...

39’x14’x5.5’ LaConner fiberglass sternpicker/crabber built in 2018. Volvo Penta D13 main engine rated at 600 hp. Twin Disc MGX5126A gear with 2.5:1 ratio. Makes 10 knots. 8” bow thruster. Packs 17k# salmon in (7) insulated holds. IMS 5 ton RSW system. Deck equipm...

85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....

42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...

29.4’x12.3’ fiberglass crabber built by Modutech in 1979. Cat 3208 rated at 300 hp. Mitsubishi 19 kW auxillary. Single hold packs 4000 lbs crab. Includes crab block and hydraulic davit. Electronics include multi system display w/ GPS, plotter, radar and sounder. I...

84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...

44’x13’3”x8’8” fiberglass troller built by C&M in 1987. John Deere 6414 main rated at 150 hp w/ Twin Disc 506 gear, both rebuilt in 2019. Fuel capacity of 600 gallons in (2) tanks. Tanked and insulated fish hold packs 15,000 lbs iced, with (2) 2,000 lb slush tanks on...

59’x17’x7’ steel crabber built by Martinolich in 1966. Caterpillar D343 main engine makes 400 hp, 1500 hours on rebuild. Twin Disc MG514 gear with 4.5:1 ratio. Makes 7 knots. (2) 20 kW Northern lights gen sets. 2,250 gallons fuel capacity in (3) tanks. Packs 50k#...

47’x15’x5.5’ custom built lobster boat. Keel laid by Long Beach Boatyard (CAN) in 2005, owner completed in 2017. Twin John Deere 8.1 mains rated at 380 hp each, both w/ low hours. ZF 280-1A gears. Isuzu 15kw genset. Fuel capacity of 1,000 gallons. Packs an estimated...

53’x15’x3.5’ fiberglass Beck/LeClerq combination vessel, built in 1986. Currently rigged as a crabber. Lugger 6125 main engine rated at 410 hp. Makes 7.5 knots at 9 gph. Twin Disc 509TD gear with 2:1 ratio. 30 kW Isuzu gen set. Packs 20k# crab,40# of salmon in (1)...

38’x13’x4.2’ fiberglass 1974 Ledford seiner rigged for crab, gillnet, and seine. John Deere 6068T main rated at hp w/ Twin Disc 506 gear. 450 gallon fuel capacity in (2) tanks. Packs 7,000 lbs crab in tanked middle hold, plus two un-tanked holds outside. Deck equip...

54.9’x17’x10.5’ fiberglass Little Hoquiam built in 1990, rigged for crab and seine. Cummins 855NA main rated at 425 hp, w/ Tonanco TN-7295 gear. John Deere 4045 65kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Packs 41,000 lbs of crab, or 80,000 lbs of salm...

36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...

42’x12’x7’ wood troller/crabber with permits, built by Remmen in 1965. Detroit v6-71 main rated at 165hp w/ Capital gear. Fuel capacity of 800 gallon in (4) tanks. Fiberglassed fish hold packs 8 tons iced tuna, and 8k lbs crab in insert. Deck equipment includes 19” J...

42’x14.5’x4’ fiberglass gillnetter built by Polar Boat Works, AK in 1990. John Deere 6081AFM75 rated at 375 hp w/ Twin Disc 5111. Lugger Northernlights 5.5 kW genset. Makes 10 knots at 9.5 gph fuel consumption. Packs 30,000 in (3) insulated fish holds. Aluminum art...

38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...

34’10”x16’x4’ custom aluminum vessel built in 2005 and significantly updated in 2016, rigged for crab and troll fisheries. John Deere 6068 main rated at 330 hp w/ 8,700 hours. ZF 22A gear. Westerbeke 7.6 kW genset. 260 gallon fuel tank. Tanked fish hold packs 6,000...

41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...

34’x12’x2’ new aluminum Svendsen built in 2021, rigged for crab, shrimp, and longline. Twin Honda 225hp outboards w/ 190 hours each. Cruises at 25kts, and does 44kts WOT. Fuel tank holds 340 gallons. (4) fish holds pack a reported 5,000 lbs. Deck equipment includes...