All Vessels

32’x13’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Rozema in 1986. Detroit 6V92 rated at 430 hp w/ Twin Disc 509 gear. Updated turbo, exhaust, blower and injectors. IMS 7.5 ton RSW w/ (2) zones. Packs 12,500 lbs in (8) fish holds. Sliding Kinematics...

29’x8’x2.5’ fiberglass Radon built in 1982, rigged for crab and salmon. 315 hp Yanmar w/ ZF 63A gear. Fish hold packs 1,200 lbs salmon and 1,100 lbs in crab insert. Hydro Slave crab block and davit, bait chopper, 2-spool gurdies, hayrack, and poles. Excellent electr...

32’x12’x30” fiberglass, flush deck, Bristol Bay gillnetter built by Mel Martin in 1980. Cummins 6BTA rated at 220 hp w/ Newage gear. (10) insulated and plumbed fish holds pack 8k lbs combined. Fixed Maritime Fab drum, Twister drive and hydraulic stern roller. 120 ga...

41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...

32’x11’x2.5’ aluminum, RSW, Bristol Bay gillnetter, built by Shore in 1971. Cummins BT6 main rated at 250 hp w/ Newage reduction gear. 4-blade stainless prop, dripless bearing.  Vickers V20 hydraulic pump. PacWest 5.5-ton RSW system. Packs 14,000 lbs in (8)...

32’x11’x5.3’ aluminum, flush deck, RSW, Bristol Bay sternpicker built in 1980 by Workboats Northwest. Cummins QSB 5.9 main rated at 380 hp and Twin Disc 507 gear. 5 ton Pac West RSW system, rebuilt in 2020. 11k pounds total capacity. (2) Eaton 3.8 cube hydraulic ...

32’x12’x36” aluminum, RSW, flush deck, Bristol Bay gillnetter, built by Marco in 1979. Rebuilt Volvo TAMD 70c rated at 300 hp w/ rebuilt Twin Disc gear and new shaft. 8” bow thruster. Recently tuned IMS 7.5 ton RSW system chills 12k lbs in insulated fish holds. Mari...

32’x21’x2’ aluminum, flush deck, Bristol Bay, triple jet, gillnetter. (3) Volvo TAMD-72WJ, keel cooled engines, with 1,350 hp combined. (3) Hamilton 321 jets w/ ZF IRM 301.P2 gears. Packs 26k lbs in (20) fish holds. PacWest 7.5 ton, skin cooled RSW, new in 2016...

42’x12’x7’ wood freezer troller, built in 1947 by Henry Meyer (BC). Gardner 6LXB w/ Twin Disc 509 reduction gear. Kubota auxiliary, new battery. Insulated fish hold w/ Dole freezer plate system and Carrier compressor.  Includes Tuna puller, aluminum poles. 680...

58’x19.5’x10’ fiberglass Delta seiner/longliner built in 1981. Detroit series 60 main rated at 500 hp w/ low hours. ZF 350-1 gear. 60kw John Deere 4045 and 20kw Northern Lights gensets. 3-stage hydro pump off main and 2-stage off big aux. 30-ton Cold Sea RSW system....

57’x15.5’x7.5’ wood combination vessel/permit package, rigged for crab, shrimp, trawl, and albacore. Built by Iver Wilson in 1963. Cummins 6-cyl 250hp main w/ Twin Disc 509 gear. 40kw Kubota genset, new in 2016. 1,200 gallon fuel capacity in (4) tanks. Complete dec...

32’x13’x36” aluminum, flush deck, RSW, gillnetter built by Sagstad in 1978.  New Cummins QSB 6.7L rated at 375 hp is scheduled for installation spring 2023. Twin Disc MG 506 reduction gear.  Updated IMS 8.5 ton RSW installed in 2017. Packs 12k lbs in (6)...

58’x24’ steel crabber built in 1969 and extensively refit and sponsoned in 2018 by North Coast Marine. Detroit 8V71, rebuilt in 2022, rated at 385 hp w/ Twin Disc 509 w/ 4:1 gear ratio. John Deere 4045 w/ 45 kW genset. 30 ton RSW system w/ titanium chill. (2) insula...

68’x22’x7’ steel gulf trawler built by Portier Shipyard in 1987. Detroit 12V-71 main rated at 310 hp, rebuilt in 2016. Twin Disc 514 gear. Cummins 6-cyl 30kw genset. 10,000 gallon fuel capacity in (2) tanks. Fish hold packs 15-20 tons. Deck equipment includes long...

34.5’x11.9’x4.5’ wood troller built in 1944 by Ignacio Trormina, and rigged for crab and salmon. 90 hp Detroit 371 main and Borg Warner gear w/ 2.91:1 ratio. Portable gas Predator generator. Fuel capacity of 300 gallons in (2) tanks. Packs 4,000 lbs crab, and 2,700...

32’x12.5’x3’ fiberglass, RSW, Bristol Bay gillnetter built by Roberts in 1986. Repowered in 2015 w/ Cummins 6BT rated at 260 hp and Twin Disc 5075 gear. Diesel drive, 7.5 ton, RSW, new in 2015. Recently reconfigured fish holds pack 8k lbs. Kinematic stern roller and...

57’x18’ steel tuna vessel built by Don Larsen in 1967. GMC 671 main engine rated at 200 hp. Tonanco 729 gear. 4k gallons fuel capacity. 35 kW Isuzu 4BG1 and 6 kW Yanmar gen sets. Packs 40k# in (1) fish hold, blast-frozen. Includes tuna pullers and safety equipme...

48’x14x5’ fiberglass seiner/crabber built in 1979 by Delta. Volvo TAMD 120A main engine rated at 290 hp. Twin Disc MG509 gear with trolling valve. Makes 8 knots. 800 gallons fuel capacity in (2) tanks. 30 kW MER gen set. Packs 30k# in RSW, (1) fish hold. 20 ton I...

32’x12.3’ aluminum, RSW, flush deck, gillnetter, built by Kvichak in 1994. Recently installed Lugger 6108 rated at 300 hp and Twin Disc 506 gear both w/ low hours. IMS 7.5 ton RSW. 6 and 4 cube direct drive hydraulic pumps. (5) insulated fish holds pack 11k lbs comb...

32’x12’x3’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Marco in 1980. Cat 3208 rated at 425 hp w/ Twin Disc 507 gear. IMS 8.5 ton system new in 2017. Packs 11k lbs in (9) zoned fish holds. 6 and 4.2 cube load sensing hydraulic pumps. Power steering....