- Year:
- 1976
- Length:
- 45
- Hull:
- Aluminum
- Builder:
- Freeman-Howard
- Location:
- California
45’x13.7’x7.2’ aluminum combination vessel rigged for crab and salmon, built by Freeman-Howard in 1976. Detroit 871 main rated at 310 hp w/ Twin Disc 509 gear. Isuzu 10kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Single tanked/insulated fish hold packs 12...
More Details- Year:
- 2015
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Kvichak
- Location:
- Alaska
32’x16’x2.5’ aluminum, twin jet, Bristol Bay gillnetter built by Kvichak in 2015. Makes 39 kt lite and 30 kt w/ fish on board. Twin Volvo D11 each rated at 625 hp w/ ZF305 gears and Hamilton 14” water jets. Wet exhaust. Packs 20k lbs in (6) insulated fish holds. PacWe...
More Details- Year:
- 1972
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
45’x14’x4.5’ charter/research vessel built in 1971 by Delta Marine Industries. Twin Cummins QS6 mains rated at 380 hp each w/ ZF 280 gears. 600 gallon fuel capacity in (4) tanks. Vickers 11gpm hydraulic pump. Single fish hold with (3) sections. Electronics include...
More Details- Year:
- 1965
- Length:
- 33
- Hull:
- Fiberglass
- Builder:
- Owens
- Location:
- California
33.3’x11.5’x4’ fiberglass crabber built by Owens in 1965. Volvo Penta turbo diesel rated at 200hp, w/ dual prop outdrive. Fuel capacity of 200 gallons. Packs 2,500 lbs in (2) floodable holds, and 1,500 lbs on deck. Vessel holds (50) 38” crab pots on deck. Aluminum...
More Details- Year:
- 1973
- Length:
- 114
- Hull:
- Steel
- Builder:
- Fairhaven Shipyard
- Location:
- Alaska
114’x30’x11’ steel, single-crew crabber/tender built at Fairhaven Shipyard in 1973. Caterpillar 3512DI main engine rated at 1207 hp. Caterpillar 7261 gear with 3.84:1 ratio. Cruises at 10 knots. 180 kW Caterpillar 3306 and 190 kW Caterpillar 3306 gen sets. 40,000 g...
More Details- Year:
- 1986
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Alaska
32’x13’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Rozema in 1986. Detroit 6V92 rated at 430 hp w/ Twin Disc 509 gear. Updated turbo, exhaust, blower and injectors. IMS 7.5 ton RSW w/ (2) zones. Packs 12,500 lbs in (8) fish holds. Sliding Kinemati...
More Details- Year:
- 1985
- Length:
- 36
- Hull:
- Fiberglass
- Location:
- California
36’x12’x4.5’ fiberglass crabber/troller built in 1985. Cummins 6BTA 5.9 main rated at 315 hp. ZF Hurth gear. 150 gallon fuel capacity. Portable Honda 2kw generator. Deck equipment includes Junes crab block, davit, and outriggers. Single fish hold with raised hatch...
More Details- Year:
- 2007
- Length:
- 52
- Hull:
- Aluminum
- Builder:
- Maxweld
- Location:
- Alaska
52’x15.5’x4’ aluminum catamaran built in 2007 by Maxweld. Previously held COI for 28 + 2. Twin Caterpillar C-9 main engines rated at 505 hp each, low hours. Twin Disc gears with 2.04:1 ratio and Arneson ASD 10B1L piercing drives. Makes 23 knots at 40 GPH. 5.5 kW Nor...
More Details- Year:
- 1975
- Length:
- 58
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...
More Details- Year:
- 1996
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All American Marine
- Location:
- Alaska
32’x13’x18” aluminum, double jet, RSW, Bristol Bay jet boat built by All American Marine in 1996. Twin Volvo Penta TAMD 63 each rated at 318 hp. Twin Hamilton 273 water jets. New IMS 8.5 ton RSW system. Packs 16k lbs in (8) fish holds. Sliding and spinning net reel...
More Details- Year:
- 1957
- Length:
- 125
- Hull:
- Steel
- Builder:
- Burtin Shipbuilding
- Location:
- Alaska
125’x32’x9’ steel tender built by Burton Shipbuilding in 1957. Twin Mitsubishi S6B3-MPTA mains rated at 385 hp each. Tonasco gear on port engine and Twin Disc 514 on starboard. John Deere 200kw and Northern Lights 40kw gensets. 17,000 gallon fuel capacity in (10) tan...
More Details- Year:
- 1980
- Length:
- 55
- Hull:
- Steel
- Builder:
- Van Peer
- Location:
- California
55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...
More Details- Year:
- 1983
- Length:
- 32
- Hull:
- Fiberglass
- Location:
- Alaska
32’x10’x4’ fiberglass Monterey double-ender, rigged for salmon trolling, and built in 1983. Isuzu MS-60 main w/ Borg Warner Velvet drive. 6,400 engine hours. Packs 500-700 lbs below deck in (3) insulated fish holds. Deck equipment includes (2) 2-spool Simplex gurdie...
More Details- Year:
- 1992
- Length:
- 95
- Hull:
- Steel
- Builder:
- La Force Shipyard
- Location:
- Washington
95’x26’x11.5’ steel tender vessel built in 1992 by La Force Shipyard. Twin Caterpillar 3408B main engines rated at 402 hp each. Twin Disc MG516 gears with 6:1 ratio. 150 kW John Deere 6068AFM (new 2021) and 175 kW Caterpillar 3306 gen sets. Packs 245k# salmon in (2)...
More Details- Year:
- 1984
- Length:
- 118
- Hull:
- Steel
- Builder:
- Giddings Boat Works
- Location:
- Alaska
118’x25’x8’ steel tender vessel built in 1984 by Giddings. Twin Cummins KT19M main engines, rated at 425 hp each. Twin Disc MG5116 gears with 4.52:1 ratio. 175 kW John Deere 6081AFM75E, 175 kW Isuzu, and 35 kW Klassen gen sets. Packs 350k# salmon in (3) fish holds....
More Details- Year:
- 1968
- Length:
- 58
- Hull:
- Wood
- Builder:
- Tacoma Boat
- Location:
- Washington
58’x16’x8’ wood seiner built by Tacoma Boat in 1968. Cat 3406 main engine rated at 335 hp w/ Twin Disc gear. Northern Lights 20 kW genset. 2,400 gallons fuel capacity in (4) tanks. Packs 70k lbs in (2) newly conditioned fish holds. 18-ton RSW system. Recently refaste...
More Details- Year:
- 1981
- Length:
- 98
- Hull:
- Steel
- Builder:
- Columbia Marine
- Location:
- Alaska
98’x24’x8.5’ steel tender vessel built in 1981 by Columbia Marine Construction Co. Twin Cummins NTA855M main engines, rated at 315 hp each. Twin Disc MG509 gears with 2.95:1 ratio. (2) 99 kW John Deere 4045AFM gen sets, new in 2019 and 2021. New exhaust for mains an...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’ aluminum, RSW, flush deck Bristol Bay gillnetter built by Marco in 1980. CAT 3116 rated at 300 hp, new in 2008. Twin Disc MG507 gear. Fixed 200 fathom narrow reel, White drum drive, Maritime Fab auto levelwind and power roller. IMS 7.5 ton RSW system. Update...
More Details- Year:
- 1967
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Skookum Boatworks
- Location:
- Washington
44’x14’x6’ fiberglass troller/longliner built by Skookum Boatworks in 1967. John Deere 6068 rated at 200 hp. Twin Disc 506 gear w/ 3:1 ratio. IMS hydraulic 7.5 ton refrigeration system can be used for spray brine or RSW in slush bags. Insulated fish hold p...
More Details- Year:
- 1977
- Length:
- 58
- Hull:
- Steel
- Location:
- Alaska
58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...
More Details- Year:
- 1980
- Length:
- 58
- Hull:
- Steel
- Builder:
- Peacock
- Location:
- Alaska
58’x24’x8’ steel combination vessel built by Peacock in 1980. Sponsoned by Wahl. Cummins QSK19 main engine rated at 660 hp. Twin Disc MG-5202 gear with 4.5:1 ratio. 90 kW John Deere 6068 and 25 kW Isuzu gen sets. Packs 140k# salmon. 25 ton IMS RSW system. Deck equ...
More Details- Year:
- 1977
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Barrie Farrell/Snoball
- Location:
- Alaska
40’x11’x5’ fiberglass gillnetter/troller/longliner built by Barrie Ferrell/Snoball in 1977. Caterpillar 3208 NT main engine rated at 210 hp. Twin Disc 502 gear. Packs 10,000 in ice in (6) fiberglass insulated slush tanks. Deck equipment includes KEM drum w/ levelwin...
More Details- Year:
- 1949
- Length:
- 126
- Hull:
- Steel
- Builder:
- FB Walker and Sons, Inc.
- Location:
- Washington
126’x30’x12’ steel house-aft crabber/tender vessel built in 1949 by FB Walker and Sons, Inc. Twin Caterpillar 3408 DI main engines rated at 365 hp each. Twin Disc MG514 gears with 6:1 ratio. Twin 180 kW Caterpillar 3306 TA and (1) 40 kW John Deer 4045DFM70 gensets. P...
More Details- Year:
- 1973
- Length:
- 100
- Hull:
- Steel
- Builder:
- Toche Enterprises, Inc.
- Location:
- Washington
100’x25’x12’ steel, tender/crabber built by Toche Enterprises Inc in 1973. Converted to a Bering Sea crabber and lengthened 10’ in 1975. Detroit 16V71 rated at 480 hp w/ Capitol HPC10500 gear w/ 6:1 ratio. (2) Detroit 671 135 kW and Yanmar 45 kW. Packs 210k lbs salm...
More Details- Year:
- 1979
- Length:
- 58
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Washington
58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...
More Details- Year:
- 1992
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Maritime Fabrication
- Location:
- Alaska
32’x13’x36” fiberglass, flush deck, top house, Bristol Bay gillnetter built by Maritime Fab in 1992. Lugger 6125A rated at 460 hp w/ ZF310A gear. Maritime Fab. fixed reel, w/ auto levelwind and 36” stern roller. IMS 7.5 ton RSW system. Bow thruster. Packs 13k lbs i...
More Details- Year:
- 1964
- Length:
- 56
- Hull:
- Steel
- Builder:
- JM Martinac
- Location:
- Washington
56’x17’x8’ steel longliner/crabber built in 1964 by JM Martinac. John Deere 6125AFM75 main engine rated at 340 hp. Twin Disc MG516 gear with 4.5:1 ratio. 65 kW John Deere 4045TF genset. 2,800 gallons fuel capacity. Nshaft and bearings in 2022. Packs 65,000 salmon...
More Details- Year:
- 1957
- Length:
- 65
- Hull:
- Steel
- Builder:
- Raymond Dugat Company
- Location:
- Alaska
65’x19’x7’ steel tender built by the Raymond Dugat Company in 1957. Twin Detroit 671 mains rated at 165 hp each w/ Twin Disc 509 gears. Kubota 28kw MER genset. Fuel capacity of 4,200 lbs in (4) tanks. IMS titanium 23-ton RSW system, new in 2016. Packs 90,000 lbs in...
More Details- Year:
- 1980
- Length:
- 65
- Hull:
- Steel
- Builder:
- Irving Steel Fabrication
- Location:
- Oregon
65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...
More Details- Year:
- 1970
- Length:
- 38
- Hull:
- Wood
- Location:
- Oregon
38’x11.4’x5’ wooden troller/crabber built in 1970 in Longview, WA. Perkins 6354 rated at 140 hp w/ Capitol gear. PTO connected with Pitts Clutch connected to 36 GPM hydraulic pump. Kolstrand (3) spool salmon gurdies, Junes crab block, trolling cockpit and anchor winc...
More Details