- Year:
- 1969
- Length:
- 30
- Hull:
- Fiberglass
- Builder:
- Blix
- Location:
- California
30’x10’x3’ fiberglass Columbia River gillnetter, built by Blix in 1969. John Deere 4045 main rated at 210 hp, w/ Velvet Drive gear. Cruises at 9 knots. 7.5 Vickers hydraulic pump w/ electric clutch. Fish hold packs 4,200 lbs. Includes reel w/ levelwind and hydrauli...
More Details- Year:
- 1958
- Length:
- 58
- Hull:
- Steel
- Location:
- Washington
58’x18.5’ steel seiner built in 1958. Cummins 855 main engine. Twin Disc MG514 gear with 3:1 ratio. 8.5 knot cruise. PTO w/ Pitts clutch. 40 kW Isuzu 4BD1 gen set. Packs 70k# in (2) fish holds. 20 ton RSW system. Kolstrand deck winch, Marco power block, (2) booms...
More Details- Year:
- 1987
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- American Welding
- Location:
- Alaska
34’x12’ aluminum combination vessel built in 1987 by American Welding. Set up for gillnet, crab, longline, and dive fisheries. Isuzu A6BGITQW main engine rated at 180 hp. (3) fish holds, slush ice. Deck equipment includes crab block. longline hauler, gillnet drum, a...
More Details- Year:
- 1989
- Length:
- 83
- Hull:
- Aluminum
- Builder:
- Peregrine Marine
- Location:
- Alaska
83’x24’x6’ aluminum research and charter landing craft built in 1989 by Peregrine Marine. (3) Cummins QSL940SMCD main engines rated at 405 hp each. ZF 325-1 gears with 2.5:1 ratio. 34” 4-blade props (3 spares included). 38 kW and 50 kW Northern Lights generators dri...
More Details- Year:
- 1980
- Length:
- 72
- Hull:
- Steel
- Builder:
- Duke's Welding
- Location:
- Oregon
72’x22’x10’ steel combination vessel. Monk-design, built by Duke’s Welding in 1980. Currently set up as a crabber/shrimper/tuna. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW Is...
More Details- Year:
- 1978
- Length:
- 134
- Hull:
- Steel
- Builder:
- Lantana Boatyard
- Location:
- Alaska
134’x32’ steel landing craft built by Lantana Boatyard Inc in 1978. Current COI for freight, oil response and oceanographic research. Cruises at 10 knots. Draws 4’ light and 7’ loaded. 14.5’ wide ramp w/ 72’x31’ cargo deck. Twin Cat C-18 each rated at 600 hp w/ Twin...
More Details- Year:
- 1980
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Albion
- Location:
- Washington
36’x11’x4.5’ fiberglass RSW sternpicker built by Albion in 1980. John Deere 6068 main rated at 201 hp, w/ 8,900 hours. ZF 220 gear w/ 2.5:1 ratio. 6.5 cube load sensing hydraulic pump off main, 20 gpm at idle. 380 gallon fuel capacity. Pac West 3-ton RSW system chi...
More Details4A – 7400# – Minimum bid $5.50/# - B-B. 4C – 5500# - Minimum bid $7.00/# - C-B. 4C – 5300# - Minimum bid $7.00/# - C-U. Accepting bids for 45 days. Auction ends on May 31, 2024. Call for information. ***QS/IFQ is being sold as-is, where-is, with all fa...
More Details- Year:
- 1946
- Length:
- 40
- Hull:
- Wood
- Builder:
- Canoe Cove
- Location:
- Oregon
40’x12’x6’ wood freezer troller built in Canoe Cove Shipyard (BC) in 1946. Currently rigged for tuna. John Deere 6068 rated 330 hp, new in 2017, and new reduction gear. Insulated, fiberglassed fish hold packs 14k lbs. 640 gallons fuel capacity. Copelametic refriger...
More Details- Year:
- 1928
- Length:
- 84
- Hull:
- Wood
- Builder:
- Johnson Brothers
- Location:
- Washington
84’x20’x12’ wood gillnet tender / charter vessel, built by Johnson Brothers for the US Bureau of Fisheries in 1928. Completely rigged for tendering but also set up for chartering with (3) passenger staterooms, plus crew quarters, (2) heads w/ showers, large comfortable...
More Details- Year:
- 2022
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Next Gen Fab
- Location:
- Alaska
32’x14.5’x18” aluminum, double jet, Bristol Bay bow picker built by Next Gen Fab in 2022. Twin John Deere each rated at 340 hp w/ ZF gear and Hamilton 276 water jets. Packs 18,000 lbs (9) fish holds. Kinematic sliding reel w/ levelwind and 36” stern roller. Electron...
More Details- Year:
- 2022
- Length:
- 36
- Hull:
- Aluminum
- Builder:
- Velocity Marine
- Location:
- Washington
36’X13’ Aluminum crabber built by Velocity Marine in 2022, like new. Twin Suzuki 350 Dual prop outboards rated at 350 hp each. 850 hrs. 18 knot cruise, 35 knots top speed. MER 22Kw gen set Model MGM-KNI three-phase gen set with front mounted with Pitts clutch. 300 ga...
More Details- Year:
- 1977
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Deltage
- Location:
- Alaska
36’x11.6’x4.4’ fiberglass troller built in 1977 by Deltage Boats LTD, British Columbia. CAT 3106 main rated at 210 hp w/ Twin Disc 506 gear. Fuel capacity of 450 gallons in (4) tanks. (2) insulated fish holds pack 9,500 lbs. Deck equipment includes aluminum A-frame...
More Details- Year:
- 1983
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
47’x14’x8.5’ fiberglass combination vessel rigged for gillnet, crab, salmon, and longline. Delta laid hull finished by private party in 1983. Detroit 671 main rated at 200 hp, w/ only 750 hours on rebuild. Twin Disc 509 gear. 10kw Isuzu genset. Packs 15,000 lbs cr...
More Details- Year:
- 2002
- Length:
- 35
- Hull:
- Aluminum
- Builder:
- North Sound Marine Inc.
- Location:
- Washington
35’x11.5’x6’ aluminum crabber built in 2002 by North Sound Marine. Twin Volvo Penta KAMD44P-B main engines rated at 265 hp each. Volvo HS563VE-A gears with 2:1 ratio. Makes 18 knots. 340 gallons fuel capacity. Packs 6k# in (2) insulated fish holds. Stove, sink, he...
More Details- Year:
- 1976
- Length:
- 21
- Hull:
- Fiberglass
- Builder:
- Glasply
- Location:
- Washington
21’x6’3’ fiberglass built by Glasply in 1976. Gas, 302 Ford rated at 200 w/ low hours and Volvo gear. Victor hydraulic pump. No hold, uses up to 5 coolers on deck. A-frame polls, davits, gurdies and wash down pump. Electronics include GPS, VHF, sounder autopilot an...
More Details- Year:
- 1942
- Length:
- 44
- Hull:
- Wood
- Builder:
- Jacobson Shipyard
- Location:
- California
44’x12’x6’ wood troller/crabber built in 1942 by Jacobson Shipyard in Tacoma, WA. Detroit 671 main w/ 7,408 hours and “crash box” reduction gear. 9kw Northern Lights genset. 14-ton fish hold w/ 6,000 lb crab tank insert. (2) Kolstrand 3-spool gurdies, aluminum outri...
More Details- Year:
- 1992
- Length:
- 42
- Hull:
- Aluminum
- Builder:
- American Eagle Mfg
- Location:
- Alaska
42’x14’x5’ aluminum stern picker built in 1992 by American Eagle Mfg in LaConnor, WA. Twin Volvo TAMD 71B each rated at 380 hp, port side main rebuilt in 2019. Includes total rebuild kit. ZF reduction gears. Packs 20k lbs in (3) insulated holds w/ bins. (2) 6 cu. R...
More Details- Year:
- 1954
- Length:
- 58
- Hull:
- Wood
- Builder:
- Hansen
- Location:
- Washington
58’x18’x8.5’ wood salmon seiner built by Hansen in 1954. CAT 343 rated at 365 hp w/ Twin Disc MG514 reduction gear. Updated aluminum bull rails, fore-deck, house roof and bridge. Kubota-MER 28 kW genset. Insulated fish holds pack 70k lbs combined. 20 ton RSW system...
More Details- Year:
- 1986
- Length:
- 39
- Hull:
- Wood
- Builder:
- Peter Smith
- Location:
- BC
39’x11.5’x5.2’ wood troller built by Peter Smith (BC) in 1986. Isuzu 6BG1 rated at 140 hp, new in 2015. PRM 401 gear. Aluminum A-frame and (2) 3-spool Simplex Gurdies. Packs approx. 10k lbs in single insulated fish hold. Electronics include (2) GPS, (2) VHF, Furuno...
More Details- Year:
- 1966
- Length:
- 44
- Hull:
- Steel
- Location:
- Oregon
44.9’x14’x7.8’ steel combination vessel rigged for crab, salmon, tuna, black cod, and built in 1966. Detroit 671 main rated at 210 hp, rebuilt in 2021. Twin Disc 509 reduction gear. Isuzu 21kw genset. Fish hold insert packs 8,500 lbs crab. Blast freeze system w/ 10...
More Details- Year:
- 1983
- Length:
- 27
- Hull:
- Fiberglass
- Builder:
- FIbercraft
- Location:
- Washington
27’x10’x2’ fiberglass bowpicker built in 1983 by Fibercraft. Twin Mercruisers make 220 hp each. Makes 40 knots, wide open. 200 gallons fuel capacity in (2) tanks. Packs 6k# salmon in (1) insulated fish hold. Deck equipment includes davit for crabbing/shrimping and...
More Details- Year:
- 1978
- Length:
- 153
- Hull:
- Steel
- Builder:
- Sea-Tac Marine
- Location:
- Washington
***TO BE SOLD AT AUCTION BY US MARSHAL BY ORDER OF THE COURT, 11:30 AM, MAY 29, 2024, AT FISHERMEN'S TERMINAL, NORTHWEST DOCK, SEATTLE, WA. LENDER’S OPTIONAL CREDIT BID POSITION IS APPROXIMATELY $700,000.00. CURRENT SURVEYED VALUE OF $3.3 MILLION. CALL OR EMAIL...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Marco
- Location:
- Alaska
32’x12’ aluminum Bristol Bay gillnetter built by Marco in 1980. Recently installed remaned CAT 3208TA rated at 375 hp, installed in 2022 by Johnson Diesel. Rebuild Twin Disc 507 gear. Packs 15,000 lbs in (8) fish holds w/ insulated slush bags. Updated bow thruster....
More Details- Year:
- 1966
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Uniflite/US Navy
- Location:
- California
36’x13.5’x3’ fiberglass vessel rigged for crab, built by Uniflite for the US Navy in 1966. Detroit 671 main w/ Twin Disc reduction gear. Fuel capacity of 300 gallons in (3) tanks. Cruises at 8 kts burning 2.5gph. Fish hold packs 4,500 lbs in tank insert. Deck equip...
More Details- Year:
- 2024
- Length:
- 31
- Hull:
- Fiberglass
- Builder:
- Neptune
- Location:
- Washington
31’x11’ fiberglass, potentially rigged to crab, gillnet and dive. Great multi-use vessel for the Puget Sound. Built by Neptune Boats in 2024. Volvo D6 rated 350 hp w/ apprx 3400 hrs and Volvo dual prop outdrive. Reported to make 42 MPH. Aluminum phone booth st...
More Details- Year:
- 1968
- Length:
- 72
- Hull:
- Steel
- Builder:
- Berg
- Location:
- Washington
72’x21’x12’ steel longliner built in 1968 by Berg. Originally built as a crabber, has tendered. Caterpillar 3412 main engine rated at 510 hp. Twin Disc MG-5202 gear with 5.04:1 ratio. 145 kW Caterpillar C6.6 gen set and 80 kW John Deere 4045 w/ new Northern Lights g...
More Details- Year:
- 2000
- Length:
- 17
- Hull:
- Aluminum
- Builder:
- Alfab
- Location:
- Alaska
18’x9.5’ aluminum seine skiff built by Alfab in 2000. GMC 453 main engine recently rebuilt, makes 140 hp. Twin Disc MG506 gear, recently gone through. Shaft pulled, stuffing box re-packed, and keel coolers flushed recently. Located in Petersburg. Asking $19,000.
More Details- Year:
- 1989
- Length:
- 53
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
53’x15.9’x6.2’ fiberglass 1989 Delta combination vessel rigged for troll, longline, and seine fisheries. John Deere FG 6081 main rated at 300 hp. Twin Disc 541C reduction gear. Isuzu 37kw and Northern Lights 5kw gensets, both with low hours. Packs 50,000 lbs in main...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Alaska
32’x10’x5’ fiberglass Monterey-style troller built in 1978 by Sunnfjord. John Deere 4039 main engine rated at 85 hp. Twin Disc 5050 gear with 3:1 ratio. Packs 4k# salmon in ice. (1) berth, stove, and sink. Includes (2) 2-spool Hasbra gurdies. Electronics include V...
More Details