- Year:
- 1977
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Oregon
36’x12.2’x5’ fiberglass charter vessel built by Modutech in 1977. Cummins QSB 5.9L rated at 425 hp. Twin Disc 5061 gear w/ 2.43:1 ratio. 250 gal fuel capacity in (2) tanks. Makes 15kts. Aluminum pole holder for (23) poles and manual crab block pulley. Electronics...
More Details- Year:
- 1994
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All Points
- Location:
- Alaska
32’x15’x40” aluminum, Bristol Bay gillnetter built by All Points in 1994. John Deere 6125AFM75, 12.5 liter, rated at 525 hp w/ Twin Disc 5111A reduction gear. Packs 17k lbs in (8) double-walled, aluminum fish holds. Pac West 10-ton RSW system. Narrow, 200 ftm drum,...
More Details- Year:
- 1976
- Length:
- 52
- Hull:
- Fiberglass
- Builder:
- Little Hoquiam
- Location:
- Alaska
52’x16’x10’ fiberglass seiner/crabber built by Little Hoquiam in 1976. John Deere 6081AFM75A main engine rated at 300 hp. Twin Disc MG-509 gear with 2.5:1 ratio. Cruises at 9 knots. 40 kW Isuzu 4JG1 gen set. 3k gallons fuel capacity. Packs 55k# in (1) insulated, t...
More Details- Year:
- 1972
- Length:
- 70
- Hull:
- Steel
- Builder:
- Bender
- Location:
- Washington
70’x21’x8’ steel combination vessel built by Bender in 1972. OR Dungeness crab 200 pot and OR shrimp permit INCLUDED. Cummins main engine rated at 550 hp. Twin Disc MG 514 w/ 3.5:1 ratio. 30kW Detroit gen set. Cruises at 8 knots. Packs 60k lbs shrimp and 40k lbs cr...
More Details- Year:
- 1978
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- California
47’x14.5’x6’ fiberglass crabber/troller built by Sunnfjord in 1978. Caterpillar 3306 main engine rated at 220 hp. Twin Disc 509 marine gear with 3:1 ratio. Cruises at 8 knots. 1k gallons fuel capacity in (2) tanks. New Isuzu 14kw gen set. Packs 4500# of crab in tan...
More Details- Year:
- 2011
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Alaska
47’x14’x6’ fiberglass, flush deck, combination troller/gillnetter built by Sunnfjord in 2011. John Deere 6068 main rated at 210 hp w/ Twin Disc 5050 gear. Next Gen 3.5kW gen w/ Kabota engine. Packs 30k lbs in single fish hold, plus additional hold for storage. Side...
More Details- Year:
- 1992
- Length:
- 30
- Hull:
- Fiberglass
- Builder:
- Frontline
- Location:
- British Columbia
30’x10’ fiberglass bowpicker built by Frontline Boats in 1992. Volvo DP main engine makes 260 hp, 100 hours on rebuild. Makes 20 knots. 200 gallons fuel capacity. Packs 6k# in (3) insulated fish holds. Deck equipment includes drum and power roller. Electronics inc...
More Details- Year:
- 2004
- Length:
- 28
- Hull:
- Fiberglass
- Builder:
- Buffalo
- Location:
- Washington
28’x11’x5’ fiberglass crabber built in 2004 by Buffalo Boats. Volvo D6 main engine makes 340 hp, 2000 hours. DPI outdrive w/ stainless props, controls, and steering installed May 2023. Spare props included. Makes 31 kts WOT. Northern Lights 6kw genset. Packs 1,500...
More Details- Year:
- 1947
- Length:
- 42
- Hull:
- Wood
- Location:
- Washington
42’x11.5’x6’ wood troller built in 1947, and completely refastened above/below water line. Detroit 6v71 main rated at 165 hp w/ Twin Disc reduction gear. Fuel capacity of 450 gallons in (2) tanks. Insulated fish hold tank insert packs 4,000 lbs in slush ice. Deck eq...
More Details- Year:
- 1987
- Length:
- 28
- Hull:
- Fiberglass
- Builder:
- Seahorse Marine
- Location:
- Washington
28’x9.4’x6’ fiberglass vessel rigged for crabbing. Built by Seahorse Marine in 1987. Volvo Penta D6-330 main rated at 330 hp. Volvo Penta DPI Outdrive w/ Nibral prop, installed in 2021. 120 gallons in (2) fuel tanks. Deck equipment includes articulating davit, 10” H...
More Details- Year:
- 1980
- Length:
- 58
- Hull:
- Steel
- Location:
- Alaska
58’x29’x9’ steel longline catcher processor originally built in 1980 by Jones Goodell, rebuilt and sponsoned in 2012. GMC Series 60 main engine rated at 470 hp. Twin Disc 514C gear with 4.5:1 ratio. 270 kW GMC Series 60 and 45 kW John Deere gensets. Packs 90k# in (1...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Alaska
32’x13.6’x6’ fiberglass flush deck, RSW, Modutech built in 1980. Twin Cummins 6BTA 5.9 mains rated at 260 hp each w/ apprx 5k hrs. Twin Disc 5061 gears. Packs 12,000 lbs in (6) insulated fish holds. IMS 7.5-ton RSW system. (2) Eaton 3.8 cu hydraulic...
More Details- Year:
- 1983
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Wesley/Gronler Boat Works
- Location:
- Alaska
32’x13.5’ fiberglass, flush deck, RSW, twin screw, gillnetter built by Wegley in 1983. Twin Detroit 8.2L mains, each rated at 210 hp. Twin Disc 502 gears w/ 2:1 ratio. Diesel drive IMS 8.5 ton RSW. Packs 12K lbs in (8) insulated holds. Kinematics power roller, and n...
More Details- Year:
- 1964
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- Alaska
38’x13.2’x7’ fiberglass sternpicker built by Thermodyne in 1964, rigged for gillnet, crab, and longline. Detroit 6-71 main rated at 180 hp. Twin Disc 509 gear. Fuel capacity of 500 gallons in (2) tanks. 13 gpm Vickers hydraulic pump. Packs 20,000 lbs in (7) insulat...
More Details- Year:
- 1995
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Glegor Marine
- Location:
- Alaska
32’x14’ aluminum Bristol Bay dual jet boat built by Glegor Marine in 1995. Makes 26 knots. Twin Iveco 6.7 mains rated at 380 hp w/ (2) new ZF gears and (2) NAMJ water jets. Onan 9 kW auxiliary. IMS 5-ton RSW w/ electric circ pump. Packs 14k lbs in (14) insulated fi...
More Details- Year:
- 1975
- Length:
- 78
- Hull:
- Steel
- Builder:
- Berg Shipyard
- Location:
- Alaska
78’x22.6’x11’ steel combination built by Berg in 1975. Rigged for tendering, longline and pots. GMC 12-V149 main rated at 725 hp. GMC 671 90 kW and Lugger 55 kW gensets. Packs 168,000 lbs cod in (2) insulated fish holds. 30 ton RSW system w/ new compressor, (2) cir...
More Details- Year:
- 1977
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- Hansen
- Location:
- Alaska
39’x13.5’x3’ fiberglass Hansen seiner built in 1977. CAT 3306 main rated at 210 hp w/ Twin Disc 509 reduction gear. Fuel capacity of 700 gallons in (2) tanks. Fish hold packs 30,000 lbs. IMS 12-ton RSW system. Deck equipment includes Kinematic deck winch and 22”...
More Details- Year:
- 1984
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- La Conner
- Location:
- Alaska
32’x14’x3’ aluminum crabber/longliner combination vessel built by La Conner in 1984. Twin Cummins 6BTA main engines rated at 315 hp each. ZF 2-20 AS gears. Yamaha EF2600 110v portable generator. Deck equipment includes Maritime Fab roller, longline reel with level...
More Details- Year:
- 1972
- Length:
- 54
- Hull:
- Fiberglass
- Builder:
- Pelagic Industries
- Location:
- British Columbia
54’x15’x8’ fiberglass combination vessel built in 1972 by Pelagic Industries. Gardner 8LXEB main engine rated at 176 hp. Twin Disc 509 gear with 2.91:1 ratio. Burns 10 lph @ 7.5 knots. Perkins 4108 genset. Appx 1,000 gallons fuel capacity in (1) tank. P...
More Details