CR24-015

$340,000
Year:
2018
Length:
33
Hull:
Aluminum
Builder:
ACI
Location:
Washington

CR24-015

33’x11’x2’ aluminum crabber built by ACI in 2018. Twin Honda 250hp outboards. Cruises at 22kts and does 40kts WOT. Fuel capacity of 200 gallons in (2) tanks. 13hp power pack w/ 30 gallon hydraulic tank. 15” Junes crab block, hydraulic davit, and dump box. Fish hold...

More Details

SP24-007

$165,000
Year:
1978
Length:
32
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP24-007

32’x11.5’ fiberglass sternpicker built in 1978 by Roberts. Volvo TAMC70D main engine rated at 260 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Packs 9k# in (6) insulated fish holds. Deck equipment includes Maritime Fab drum, levelwind, rower roller, and...

More Details

CO24-003

$2,500,000
Year:
1990
Length:
87
Hull:
Steel
Builder:
Mid Coast Marine
Location:
Alaska

CO24-003

87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...

More Details

CR24-013

$215,000
Year:
2003
Length:
32
Hull:
Fiberglass
Builder:
H&H Marine
Location:
California

CR24-013

32’x11.5’x4.5’ fiberglass lobster boat built by H&H Marine in 2003. Cummins 6BTA turbo diesel rated at 315hp w/ 2,800 hours. ZF reduction gear. 14kt cruise at 2200rpm and 11kt cruise at 2000 rpm. (2) 100gal live-wells below deck w/ (3) water and (2) air quick releas...

More Details

PR24-002

$2,500,000
Year:
1978
Length:
167
Hull:
Steel
Builder:
Maxon Marine Industries, Inc.
Location:
Washington

PR24-002

167’x46’x16’ combination catcher/processor vessel built in 1978 by Maxon Industries. Twin Caterpillar 3508 main engines rated at 850 hp each, in-framed 2023. Caterpillar 7261 marine gears with 5.11:1 ratio. (2) 190 kW Caterpillar 3306 and 55 kW Caterpillar gen sets....

More Details

SE24-009

$35,000
Year:
1929
Length:
52
Hull:
Wood
Location:
Alaska

SE24-009

52.7’x15’x7’ wood seiner built in 1929. Detroit 8V71 main w/ Twin Disc 509 reduction gear. Kubota 28kw genset. Fuel capacity of 450 gallons in (2) tanks. IMS 18-ton RSW system. Fish hold packs 40,000 lbs. Deck equipment includes Kolstrand deck winch, Vitek power b...

More Details

CH24-005

$2,800,000
Year:
1995
Length:
78
Hull:
Steel
Builder:
Metalcraft Marine
Location:
Alaska

CH24-005

78’x26’ steel, luxury, expedition yacht built in 1995 by Metalcraft Marine. Deluxe charter vessel, in excellent condition. Cat 3412 main rated at 520 hp, rebuilt in 2024. Cummins/Onan 30 kW and John Deere 70 kw gen sets. NAID dynamic stabilizers, bow and stern thruste...

More Details

CR24-012

$70,000
Year:
1997
Length:
31
Hull:
Fiberglass
Builder:
Mel Martin
Location:
California

CR24-012

31’x12’x2’ fiberglass Mel Martin crabber built in 1997. Volvo Penta Kad 44 main rated at 260 hp w/ 1100 hours. Outdrive. Does 15 kts. Packs 6,000 lbs in (3) tanked fish holds. Electronics include (2) Garmin 182c GPS/plotters and (2) VHF radios. Also includes 2014...

More Details

TR24-010

$56,000
Year:
1973
Length:
35
Hull:
Fiberglass
Builder:
Pettis
Location:
Oregon

TR24-010

35.2’x12’x6.4’ fiberglass troller built by Pettis in 1973. Cummins 555 main rated at 255 hp. Fuel capacity of 150 gallons in (2) tanks. Insulated fish hold packs 12,000 lbs in (6) bays. Deck equipment includes 3-spool gurdies, tuna pullers, crab block and hydraulic d...

More Details

CH24-004

$495,000
Year:
2008
Length:
72
Hull:
Steel
Builder:
Schrier Boats
Location:
Alaska

CH24-004

72’x18’ steel hull, aluminum house, research/pleasure vessel built by Schrier Boats in 1999 and finished by owner in 2008. Sleeps (10) guests and (4) crew. (2) heads w/ showers. Lugger L1276A rated at 340 hp w/ updated Twin Disc CPG12 reduction gear and Hundested var...

More Details

SP24-004

$20,000
Year:
1969
Length:
30
Hull:
Fiberglass
Builder:
Blix
Location:
California

SP24-004

30’x10’x3’ fiberglass Columbia River gillnetter, built by Blix in 1969. John Deere 4045 main rated at 210 hp, w/ Velvet Drive gear. Cruises at 9 knots. 7.5 Vickers hydraulic pump w/ electric clutch. Fish hold packs 4,200 lbs. Includes reel w/ levelwind and hydrauli...

More Details

SE24-008

$475,000
Year:
1958
Length:
58
Hull:
Steel
Location:
Washington

SE24-008

58’x18.5’ steel seiner built in 1958. Cummins 855 main engine. Twin Disc MG514 gear with 3:1 ratio. 8.5 knot cruise. PTO w/ Pitts clutch. 40 kW Isuzu 4BD1 gen set. Packs 70k# in (2) fish holds. 20 ton RSW system. Kolstrand deck winch, Marco power block, (2) booms...

More Details

SP24-006

$150,000
Year:
1987
Length:
34
Hull:
Aluminum
Builder:
American Welding
Location:
Alaska

SP24-006

34’x12’ aluminum combination vessel built in 1987 by American Welding. Set up for gillnet, crab, longline, and dive fisheries. Isuzu A6BGITQW main engine rated at 180 hp. (3) fish holds, slush ice. Deck equipment includes crab block. longline hauler, gillnet drum, a...

More Details

RS24-001

$2,450,000
Year:
1989
Length:
83
Hull:
Aluminum
Builder:
Peregrine Marine
Location:
Alaska

RS24-001

83’x24’x6’ aluminum research and charter landing craft built in 1989 by Peregrine Marine. (3) Cummins QSL940SMCD main engines rated at 405 hp each. ZF 325-1 gears with 2.5:1 ratio. 34” 4-blade props (3 spares included). 38 kW and 50 kW Northern Lights generators dri...

More Details

CO18-029

$1,600,000
Year:
1980
Length:
72
Hull:
Steel
Builder:
Duke's Welding
Location:
Oregon

CO18-029

72’x22’x10’ steel combination vessel. Monk-design, built by Duke’s Welding in 1980. Currently set up as a crabber/shrimper/tuna. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW Is...

More Details

LC24-001

$2,200,000
Year:
1978
Length:
134
Hull:
Steel
Builder:
Lantana Boatyard
Location:
Alaska

LC24-001

134’x32’ steel landing craft built by Lantana Boatyard Inc in 1978. Current COI for freight, oil response and oceanographic research. Cruises at 10 knots. Draws 4’ light and 7’ loaded. 14.5’ wide ramp w/ 72’x31’ cargo deck. Twin Cat C-18 each rated at 600 hp w/ Twin...

More Details

SP24-005

$96,000
Year:
1980
Length:
36
Hull:
Fiberglass
Builder:
Albion
Location:
Washington

SP24-005

36’x11’x4.5’ fiberglass RSW sternpicker built by Albion in 1980. John Deere 6068 main rated at 201 hp, w/ 8,900 hours. ZF 220 gear w/ 2.5:1 ratio. 6.5 cube load sensing hydraulic pump off main, 20 gpm at idle. 380 gallon fuel capacity. Pac West 3-ton RSW system chi...

More Details

AUCTION: Halibut QS/IFQ: LL24-005

$0

AUCTION: Halibut QS/IFQ: LL24-005

4A – 7400# – Minimum bid $5.50/# - B-B. 4C – 5500# - Minimum bid $7.00/# - C-B. 4C – 5300# - Minimum bid $7.00/# - C-U. Accepting bids for 45 days. Auction ends on May 31, 2024. Call for information. ***QS/IFQ is being sold as-is, where-is, with all fa...

More Details

TR24-009

$75,000
Year:
1946
Length:
40
Hull:
Wood
Builder:
Canoe Cove
Location:
Oregon

TR24-009

40’x12’x6’ wood freezer troller built in Canoe Cove Shipyard (BC) in 1946. Currently rigged for tuna. John Deere 6068 rated 330 hp, new in 2017, and new reduction gear. Insulated, fiberglassed fish hold packs 14k lbs. 640 gallons fuel capacity. Copelametic refriger...

More Details

TE24-003

$375,000
Year:
1928
Length:
84
Hull:
Wood
Builder:
Johnson Brothers
Location:
Washington

TE24-003

84’x20’x12’ wood gillnet tender / charter vessel, built by Johnson Brothers for the US Bureau of Fisheries in 1928. Completely rigged for tendering but also set up for chartering with (3) passenger staterooms, plus crew quarters, (2) heads w/ showers, large comfortable...

More Details

CR24-011

$435,000
Year:
2022
Length:
36
Hull:
Aluminum
Builder:
Velocity Marine
Location:
Washington

CR24-011

36’X13’ Aluminum crabber built by Velocity Marine in 2022, like new. Twin Suzuki 350 Dual prop outboards rated at 350 hp each. 850 hrs. 18 knot cruise, 35 knots top speed. MER 22Kw gen set Model MGM-KNI three-phase gen set with front mounted with Pitts clutch. 300 ga...

More Details

TR24-008

$88,000
Year:
1977
Length:
36
Hull:
Fiberglass
Builder:
Deltage
Location:
Alaska

TR24-008

36’x11.6’x4.4’ fiberglass troller built in 1977 by Deltage Boats LTD, British Columbia. CAT 3106 main rated at 210 hp w/ Twin Disc 506 gear. Fuel capacity of 450 gallons in (4) tanks. (2) insulated fish holds pack 9,500 lbs. Deck equipment includes aluminum A-frame...

More Details

TR21-012

$125,000
Year:
1983
Length:
47
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

TR21-012

47’x14’x8.5’ fiberglass combination vessel rigged for gillnet, crab, salmon, and longline. Delta laid hull finished by private party in 1983. Detroit 671 main rated at 200 hp, w/ only 750 hours on rebuild. Twin Disc 509 gear. 10kw Isuzu genset. Packs 15,000 lbs cr...

More Details

CR24-010

$100,000
Year:
2002
Length:
35
Hull:
Aluminum
Builder:
North Sound Marine Inc.
Location:
Washington

CR24-010

35’x11.5’x6’ aluminum crabber built in 2002 by North Sound Marine. Twin Volvo Penta KAMD44P-B main engines rated at 265 hp each. Volvo HS563VE-A gears with 2:1 ratio. Makes 18 knots. 340 gallons fuel capacity. Packs 6k# in (2) insulated fish holds. Stove, sink, he...

More Details

TR24-007

$14,000
Year:
1976
Length:
21
Hull:
Fiberglass
Builder:
Glasply
Location:
Washington

TR24-007

21’x6’3’ fiberglass built by Glasply in 1976. Gas, 302 Ford rated at 200 w/ low hours and Volvo gear. Victor hydraulic pump. No hold, uses up to 5 coolers on deck. A-frame polls, davits, gurdies and wash down pump. Electronics include GPS, VHF, sounder autopilot an...

More Details

CR22-019

$25,000
Year:
1942
Length:
44
Hull:
Wood
Builder:
Jacobson Shipyard
Location:
California

CR22-019

44’x12’x6’ wood troller/crabber built in 1942 by Jacobson Shipyard in Tacoma, WA. Detroit 671 main w/ 7,408 hours and “crash box” reduction gear. 9kw Northern Lights genset. 14-ton fish hold w/ 6,000 lb crab tank insert. (2) Kolstrand 3-spool gurdies, aluminum outri...

More Details

SP24-003

$325,000
Year:
1992
Length:
42
Hull:
Aluminum
Builder:
American Eagle Mfg
Location:
Alaska

SP24-003

42’x14’x5’ aluminum stern picker built in 1992 by American Eagle Mfg in LaConnor, WA. Twin Volvo TAMD 71B each rated at 380 hp, port side main rebuilt in 2019. Includes total rebuild kit. ZF reduction gears. Packs 20k lbs in (3) insulated holds w/ bins. (2) 6 cu. R...

More Details

SE24-007

$450,000
Year:
1954
Length:
58
Hull:
Wood
Builder:
Hansen
Location:
Washington

SE24-007

58’x18’x8.5’ wood salmon seiner built by Hansen in 1954. CAT 343 rated at 365 hp w/ Twin Disc MG514 reduction gear. Updated aluminum bull rails, fore-deck, house roof and bridge. Kubota-MER 28 kW genset. Insulated fish holds pack 70k lbs combined. 20 ton RSW system...

More Details

TR24-006

$98,000
Year:
1986
Length:
39
Hull:
Wood
Builder:
Peter Smith
Location:
BC

TR24-006

39’x11.5’x5.2’ wood troller built by Peter Smith (BC) in 1986. Isuzu 6BG1 rated at 140 hp, new in 2015. PRM 401 gear. Aluminum A-frame and (2) 3-spool Simplex Gurdies. Packs approx. 10k lbs in single insulated fish hold. Electronics include (2) GPS, (2) VHF, Furuno...

More Details

CR24-009

$700,000
Year:
1966
Length:
44
Hull:
Steel
Location:
Oregon

CR24-009

44.9’x14’x7.8’ steel combination vessel rigged for crab, salmon, tuna, black cod, and built in 1966. Detroit 671 main rated at 210 hp, rebuilt in 2021. Twin Disc 509 reduction gear. Isuzu 21kw genset. Fish hold insert packs 8,500 lbs crab. Blast freeze system w/ 10...

More Details

Sign up for email updates