All Vessel Listings[651 listings]

Click here to be notified of updates to the All Vessel Listings pagewatch helphelp
« first ‹ previous next › last »
Vessels 51 - 100 of 651
$45,000
thumbnail TR15-010  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 48    Hull: Wood    Builder: K Carter    Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA salmon troll permit. 250 pot crab permit and approx 190 pots available. Asking $45,000.
$575,000
thumbnail PK18-023  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 49    Hull: Wood    Builder: Tacoma Boatyard    Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$1,400,000
thumbnail CO18-036  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 98    Hull: Steel    Builder: Bender    Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$1,400,000
thumbnail DR18-006  Draggers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 98    Hull: Steel    Builder: Bender    Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$1,400,000
thumbnail CR18-050  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 98    Hull: Steel    Builder: Bender    Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$1,400,000
thumbnail TE18-018  Tenders You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 98    Hull: Steel    Builder: Bender    Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$100,000
thumbnail BB18-050  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 32    Hull: Aluminum    Builder: Elliot Metal Fabricators    Location: Alaska
32'x12'x14" aluminum, top house, flush deck, Bristol Bay gillnetter built by Elliot Metal Fab. in 1990. Cat 3116 rated at 300 hp connected to a Hamilton 291 jet. Maritime Fab stern roller, sliding reel w/ auto levelwind and Twister drive. Packs 12k lbs in 13 fish holds. Direct drive 16 gpm hydraulic pump engaged by pto. Electronics include (3) VHF, (3) GPS, sounder, and CB radio. Red Dot heater, (3) berths, plus day bunk in top house, marine toilet, shower and fridge. Call for a survey. Asking $100,000.
$200,000
thumbnail PK18-022  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1924    Length: 47    Hull: Wood    Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$200,000
thumbnail TR18-049  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1924    Length: 47    Hull: Wood    Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$200,000
thumbnail CR18-049  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1924    Length: 47    Hull: Wood    Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$420,000
thumbnail SE18-020  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 57    Hull: Wood    Builder: Wahl    Location: Washington
57'x18'x10' wood seiner built by Wahl in 1978. Cummins 855 rated at 300 hp w/ Twin Disc gear, approx 3k hrs. Perkins 45 kW and Kabota 27 kW gensets both w/ low hours. Aluminum top house and bulwarks. All new RSW system w/ (2) compressors. Insulated fish hold packs 80k lbs. Pilkington deck winch, new steering, aluminum hatch cover, winches, cables, A-frame mast, picking boom and main boom w/ slider. All new electronics include, radar, autopilot, sounder, plotter and sat-phone and sat-TV. (2) state rooms, (7) berths, new floor, electric stove, marine head, and hot water heater. Excellent condition throughout. Asking $420,000.
$200,000
thumbnail TE18-017  Tenders You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1965    Length: 145    Hull: Steel    Builder: American Marine Corp    Location: Washington
145’x35’x11’ steel tender vessel built in 1965 by American Marine Corp in New Orleans. Vessel operated for a number of years as a Bering Sea crab vessel. Twin Cat D398 main engines rated at 850 hp each with Cat 3192 reverse reduction gears. (2) MTU 585 kW gensets and (1) Cummins 150 kW genset. Holds 54K gallons fuel in (5) steel tanks. Packs 200k# crab, 500k# salmon in (4) tanks. Large galley with Imperial (6) burner oven. Accomodations for (12). (2) deck cranes, (1) straight boom, (1) knuckle boom. Full electronics package. Call for survey. Asking $200,000.
$575,000
thumbnail TN18-020  Tuna You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 49    Hull: Wood    Builder: Tacoma Boatyard    Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$575,000
thumbnail TR18-048  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 49    Hull: Wood    Builder: Tacoma Boatyard    Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$575,000
thumbnail CR18-048  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 49    Hull: Wood    Builder: Tacoma Boatyard    Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$250,000
thumbnail TR18-047  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2005    Length: 41    Hull: Fiberglass    Builder: George Vandelft    Location: Canada
41'x14'x6' fiberglass combination troller/gillnet/longliner built by George Vandelft in 2005. John Deere 6081 rated at 340 hp connected to a Twin Disc gear w/ 3:1 ratio. New SS exhaust. Bulbous bow and rolling chalks. Easthope gurdies, 25 skate longline drum, hauler and longline spooler. Lifting davit for skiff and nets. Fiberglass fish hold packs 25k lbs of halibut. Removable tank insert. Holds 4k gallons fuel in (4) tanks. Electronics include radar, autopilot, sounder, AIS, (2) computers, gps and inverter. Diesel stove, full size freezer/fridge, marine head w/ shower and (4) berths. Asking $250,000 CDN.
$250,000
thumbnail CO18-035  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2005    Length: 41    Hull: Fiberglass    Builder: George Vandelft    Location: Canada
41'x14'x6' fiberglass combination troller/gillnet/longliner built by George Vandelft in 2005. John Deere 6081 rated at 340 hp connected to a Twin Disc gear w/ 3:1 ratio. New SS exhaust. Bulbous bow and rolling chalks. Easthope gurdies, 25 skate longline drum, hauler and longline spooler. Lifting davit for skiff and nets. Fiberglass fish hold packs 25k lbs of halibut. Removable tank insert. Holds 4k gallons fuel in (4) tanks. Electronics include radar, autopilot, sounder, AIS, (2) computers, gps and inverter. Diesel stove, full size freezer/fridge, marine head w/ shower and (4) berths. Asking $250,000 CDN.
$400,000
thumbnail PK18-021  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 44    Hull: Steel    Builder: Figueiredo    Location: California
44'x14.2'x6.5' steel crabber built by Figueiredo in 1971. Cummins main rated at 250 hp, overhauled in 2009. Twin Disc reduction gear. Fuel capacity of 1,700 gal in (3) tanks. Vickers 24 gal and 30 gal hydraulic pumps off fwd/aft PTOs. Packs 19,000# in fish hold, insulated with fiberglass over foam. Electronics include GPS, (3) VHF, radar, Furuno sounder, plotter, and 3000w inverter. INCLUDES CA 400 pot crab permit good to 44' (+5'), crab block, and approx. 350 crab pots. Call for survey. Asking $400,000.
$400,000
thumbnail CR18-047  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 44    Hull: Steel    Builder: Figueiredo    Location: California
44'x14.2'x6.5' steel crabber built by Figueiredo in 1971. Cummins main rated at 250 hp, overhauled in 2009. Twin Disc reduction gear. Fuel capacity of 1,700 gal in (3) tanks. Vickers 24 gal and 30 gal hydraulic pumps off fwd/aft PTOs. Packs 19,000# in fish hold, insulated with fiberglass over foam. Electronics include GPS, (3) VHF, radar, Furuno sounder, plotter, and 3000w inverter. INCLUDES CA 400 pot crab permit good to 44' (+5'), crab block, and approx. 350 crab pots. Call for survey. Asking $400,000.
$195,000
thumbnail TR18-046  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 73    Hull: Steel    Builder: Carroll Hoeppner    Location: Oregon
73'x22'x7' steel tuna troller built by Carroll Hoeppner in 1978. Twin Detroit 6-71 w/ 360 hp total. Twin Disc gears w/ 4.5:1 ratio. Isuzu 40 kW and 35 kW gensets. Spray brine system freezes 4 tons/day. Packs 50 tons in (1) insulated fish hold. Lyon's hydraulic fish pullers. Electronics include sonar, autopilot, redundant radar, VHF, computer, plotter and sonar. Spacious galley, (2) staterooms, marine head, and shower. Asking $195,000.
$195,000
thumbnail TN18-019  Tuna You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 73    Hull: Steel    Builder: Carroll Hoeppner    Location: Oregon
73'x22'x7' steel tuna troller built by Carroll Hoeppner in 1978. Twin Detroit 6-71 w/ 360 hp total. Twin Disc gears w/ 4.5:1 ratio. Isuzu 40 kW and 35 kW gensets. Spray brine system freezes 4 tons/day. Packs 50 tons in (1) insulated fish hold. Lyon's hydraulic fish pullers. Electronics include sonar, autopilot, redundant radar, VHF, computer, plotter and sonar. Spacious galley, (2) staterooms, marine head, and shower. Asking $195,000.
$185,000
thumbnail BB18-046  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 32    Hull: Aluminum    Builder: Marco    Location: Alaska
32'x12' Marco Bristol Bay boat, built in 1980. 330 hp Lugger installed 1992, appr 8,500 hrs. 7.5 ton Pac West RSW system, engine room installation, new in 2014. New Micro Command controls. Rebuilt anchor winch and power roller. Curry articulating drum. Packs 10k lbs, fish holds insulated and glassed in 2012. Garmin 162 GPS, Furuno radar, (3) VHF, and more. Good opportunity for a repowered and refrigerated Marco. Asking $185,000.
$45,000
thumbnail PL18-007  Pleasure You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 41    Hull: Fiberglass    Builder: DeFever    Location: Washington
41'x14'x3' fiberglass tri-cabin trawler style pleasure boat, built by Davis/DeFever in 1985. Twin 6-cylinder Ford Lehman Diesel 120 hp mains w/ 200 hours, and Borg Warner gears. 3kW Empac genset. Fuel capacity of 400 gallons in (2) tanks. Recent upgrades include replacing all through hull fittings, connections, and hoses. New engine room and laz bulkheads. Cabin has (2) staterooms, Dickinson diesel stove, (2) heads, and a shower. Call for survey. Asking $45,000.
$30,000
BB18-045  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1959    Length: 32    Hull: Aluminum    Builder: Marco    Location: Alaska
32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics include GPS, VHF, radar and depth sounder. Asking $30,000.
$30,000
SP18-019  Sternpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1959    Length: 32    Hull: Aluminum    Builder: Marco    Location: Alaska
32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics include GPS, VHF, radar and depth sounder. Asking $30,000.
$85,000
thumbnail PL18-006  Pleasure You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 36    Hull: Fiberglass    Builder: Genmar Yacht Group    Location: Washington
36'x13'x5' twin-screw fiberglass pleasure craft built by Genmar Yacht Group in 1973, rebuilt inside and out by Little Hoquiam. Twin Cat 3116 main engines rated at 350 hp each. ZF 220 gears with 1.53:1 ratio. (3) steering stations, (2) bronze spade-style rudders, (2) 4-blade bronze propellers. Cruises at 20 knots. 400 gallons fuel capacity in (4) aluminum tanks. 100 gallons fresh water capacity in (1) aluminum tank. Aft deck overlaid with teak strip decking. Galley includes propane stove top, stainless steel sink, refrigerator, and microwave, with adjacent setee. Stateroom with (2) stacked berths. Sleeps (2) additional in fo'c'sle. Electronics include (2) VHF, radar, sounder, and plotter. Very clean vessel with comfortable accommodations. Call for survey. Asking $85,000.
$150,000
thumbnail SE18-043  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1946    Length: 64.5    Hull: Wood    Builder: Tacoma Boat Works    Location: Washington
64.5'x18'x8' grandfathered limit seiner rigged as crabber/tender, built by Tacoma Boat Works in 1946. CAT D343 main w/ Twin Disc 514 gear. Isuzu 40 kw genset. 3,600 gallon fuel capacity in (4) tanks. Packs 78,000 lbs in (2) tanked, insulated holds. 30 ton RSW system, chills both fish holds. Deck equipment includes aluminum tuna poles, crab block, bait chopper, line coiler, and pot pump. Electronics include VHF, Garmin GPS, (2) Furuno radars, and Freeman autopilot. CA salmon permit available. Call for survey. Asking $150,000.
$150,000
thumbnail CR18-043  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1946    Length: 64.5    Hull: Wood    Builder: Tacoma Boat Works    Location: Washington
64.5'x18'x8' grandfathered limit seiner rigged as crabber/tender, built by Tacoma Boat Works in 1946. CAT D343 main w/ Twin Disc 514 gear. Isuzu 40 kw genset. 3,600 gallon fuel capacity in (4) tanks. Packs 78,000 lbs in (2) tanked, insulated holds. 30 ton RSW system, chills both fish holds. Deck equipment includes aluminum tuna poles, crab block, bait chopper, line coiler, and pot pump. Electronics include VHF, Garmin GPS, (2) Furuno radars, and Freeman autopilot. CA salmon permit available. Call for survey. Asking $150,000.
$350,000
thumbnail BB18-043  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 32    Hull: Aluminum    Builder: Baycraft    Location: Alaska
32'x15'x37" aluminum, flush deck, RSW, Bristol Bay gillnetter built by Baycraft in 1991. Twin Volvo 122D w/ 1000 hp combined. ZF RM310 gears rebuilt in 2012 w/ 1.79:1 ratio. New IMS 8.5 ton RSW chills 15k lbs in (6) recently insulated fish holds. Packs 20,000 lbs total. 500 gallons fuel in (2) tanks. Custom reel, Rex Roth drive, Maritime levelwind and roller. New brailers. Complete electronics package. Spacious galley, (4) berths plus day bunk, Red Dot heater, shower and head. Available after the 2019 season. Call for survey. Asking $350,000.
$225,000
thumbnail LL17-016  Longliner You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2017    Length: 38    Hull: Fiberglass    Builder: Bluewater Marine    Location: Washington
38'x11.4'x5' fiberglass troller, brand new, never been fished. Built 2017 by Bluewater Marine. Builder constructed for his own use, no detail overlooked. All equipment is new. John Deere 6068DFM rated at 131 hp, ZF W220 gear. Well insulated 330 cu ft fish hold. 400 gal fuel, 250 gal water. Electronics include Standard chart plotter, Koden sounder, GPS, ComNav autopilot, Furuno 1835 radar, and more. Head, shower and (2) berths. Very nice boat. Call for details. Reduced to $225,000.
$225,000
thumbnail TR17-031  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2017    Length: 38    Hull: Fiberglass    Builder: Bluewater Marine    Location: Washington
38'x11.4'x5' fiberglass troller, brand new, never been fished. Built 2017 by Bluewater Marine. Builder constructed for his own use, no detail overlooked. All equipment is new. John Deere 6068DFM rated at 131 hp, ZF W220 gear. Well insulated 330 cu ft fish hold. 400 gal fuel, 250 gal water. Electronics include Standard chart plotter, Koden sounder, GPS, ComNav autopilot, Furuno 1835 radar, and more. Head, shower and (2) berths. Very nice boat. Call for details. Reduced to $225,000.
$2,600,000
thumbnail TE18-016  Tenders You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 100    Hull: Steel    Builder: Pacific Fishermen Shipyard    Location: Washington
100'x36'x12.5' steel crabber built by Pacific Fishermen Shipyard in 1969. Cat D348 main engine rated at 750 hp. Twin Disc MG527 gear with ratio of 5.17:1. (2) Cat 3306B 165 kW and (1) Deere 4039D 40 kW gen sets. Packs 200,000# crab, 400,000# salmon. 40 ton RSW system built by Highland, new compressors, motors, condensers in 2017. 12 ton Slattery deck crane. Full tender package and hydraulic sorting table included. Electronics include (3) VHF, (2) Furuno radars, (2) Furuno GPS, and Robertson autopilot. Call for survey. Asking $2,600,000.
$2,600,000
thumbnail CO18-033  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 100    Hull: Steel    Builder: Pacific Fishermen Shipyard    Location: Washington
100'x36'x12.5' steel crabber built by Pacific Fishermen Shipyard in 1969. Cat D348 main engine rated at 750 hp. Twin Disc MG527 gear with ratio of 5.17:1. (2) Cat 3306B 165 kW and (1) Deere 4039D 40 kW gen sets. Packs 200,000# crab, 400,000# salmon. 40 ton RSW system built by Highland, new compressors, motors, condensers in 2017. 12 ton Slattery deck crane. Full tender package and hydraulic sorting table included. Electronics include (3) VHF, (2) Furuno radars, (2) Furuno GPS, and Robertson autopilot. Call for survey. Asking $2,600,000.
$2,600,000
thumbnail CR18-045  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 100    Hull: Steel    Builder: Pacific Fishermen Shipyard    Location: Washington
100'x36'x12.5' steel crabber built by Pacific Fishermen Shipyard in 1969. Cat D348 main engine rated at 750 hp. Twin Disc MG527 gear with ratio of 5.17:1. (2) Cat 3306B 165 kW and (1) Deere 4039D 40 kW gen sets. Packs 200,000# crab, 400,000# salmon. 40 ton RSW system built by Highland, new compressors, motors, condensers in 2017. 12 ton Slattery deck crane. Full tender package and hydraulic sorting table included. Electronics include (3) VHF, (2) Furuno radars, (2) Furuno GPS, and Robertson autopilot. Call for survey. Asking $2,600,000.
$115,000
thumbnail PK18-020  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 26    Hull: Fiberglass    Builder: Tollycraft    Location: Oregon
26'x10.5' fiberglass crabber built by Tolley Craft in 1985. Chevy gas engine rated at 320 hp w/ Borg Warner V-drive. Cruises at 22 knots. Junes 15" crab block w/ stainless steal back. Holds 3500 lbs in totes. (2) fuel tanks hold 140 gallons total. 28 GPM hydraulic pump w/ 65 gallon tank. Electronics include VHF, sounder, GPS and auto pilot. Includes OR 200 pot permit good to 26' and gear. Asking $115,000.
$115,000
thumbnail CR18-044  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 26    Hull: Fiberglass    Builder: Tollycraft    Location: Oregon
26'x10.5' fiberglass crabber built by Tolley Craft in 1985. Chevy gas engine rated at 320 hp w/ Borg Warner V-drive. Cruises at 22 knots. Junes 15" crab block w/ stainless steal back. Holds 3500 lbs in totes. (2) fuel tanks hold 140 gallons total. 28 GPM hydraulic pump w/ 65 gallon tank. Electronics include VHF, sounder, GPS and auto pilot. Includes OR 200 pot permit good to 26' and gear. Asking $115,000.
$445,000
thumbnail BB18-042  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 32    Hull: Aluminum    Builder: Strongback Metal Boats    Location: Alaska
32'x14' single-jet, aluminum Bristol Bay gillnetter built by Strongback Metal Boats in 2015. John Deere 6090 AFM85 main engine rated at 500 hp, with 1200 hours. ZE 305-3 gear with 2.25:1 ratio powering a NamJet 431HH jet. Packs 14,000# in (8) holds. 7.5 ton IMS RSW. 8" bow thruster. Deck equipment includes Kinematics 200 fathom reel and 36" power roller. 4 berths. Electronics include (2) Garmin GPS, (2) VHF, Garmin radar, and 4K watt inverter. Asking $445,000.
$1,200,000
thumbnail TE18-014  Tenders You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 56    Hull: Fiberglass    Builder: Hoquiam    Location: Alaska
56'x18'x6' fiberglass seiner/tender, built by Hoquiam in 1990. Cummins 855 main rated at 370 hp, rebuilt in 2013. Isuzu 40kw genset. IMS 20 ton RSW system. Packs 120,000 salmon in (2) insulated holds. Complete electronics package. Call for more information and current survey. Asking $1,200,000.
$1,200,000
thumbnail SE18-016  Seiners You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 56    Hull: Fiberglass    Builder: Hoquiam    Location: Alaska
56'x18'x6' fiberglass seiner/tender, built by Hoquiam in 1990. Cummins 855 main rated at 370 hp, rebuilt in 2013. Isuzu 40kw genset. IMS 20 ton RSW system. Packs 120,000 salmon in (2) insulated holds. Complete electronics package. Call for more information and current survey. Asking $1,200,000.
$21,000
thumbnail BP18-007  Bowpickers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 27.5    Hull: Fiberglass    Builder: Tollycraft    Location: Washington
27.5’x10.5’ fiberglass bowpicker, built by Tollycraft in 1973. Mercruiser 7.4LMPFI main rated at 360 hp, with only 400 hours. Bravo II outdrive. 30 kts top speed. Fuel capacity of 200 gallons in (4) tanks. Vicker hydraulic pump. Fish hold capacity of 14,000 lbs in (9) holds. Includes net reel, currently in storage. Garmin Sounder. Asking $21,000.
$240,000
thumbnail BB18-041  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 32    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
32'x14'x36"aluminum, RSW, flush deck, Bristol Bay gillnetter built by Hydraulic Fishing Supply in 1985. Detroit w/ approx. 435 hp and Twin Disc 509 gear. Bow thruster. IMS 7.5 ton RSW system w/ (3) zones. Packs 18k lbs in (9) insulated fish holds. Aluminum reel, levelwind, and Kinmatic roller. Electronics include (2) GPS, VHF, radar, and inverter. (4) berths, shower, head and freezer. Asking $240,000.
$180,000
thumbnail PK18-019  Boat/Permit Pkgs You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 43    Hull: Aluminum    Builder: US Navy    Location: Washington
43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics include VHF, (2) radars, (2) sounders, plotter, and ComNav autopilot. Includes OR 200 pot crab permit. Call for survey. Asking $180,000 for the package.
$180,000
thumbnail TR18-045  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 43    Hull: Aluminum    Builder: US Navy    Location: Washington
43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics include VHF, (2) radars, (2) sounders, plotter, and ComNav autopilot. Includes OR 200 pot crab permit. Call for survey. Asking $180,000 for the package.
$180,000
thumbnail CO18-032  Combination You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 43    Hull: Aluminum    Builder: US Navy    Location: Washington
43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics include VHF, (2) radars, (2) sounders, plotter, and ComNav autopilot. Includes OR 200 pot crab permit. Call for survey. Asking $180,000 for the package.
$180,000
thumbnail CR18-042  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 43    Hull: Aluminum    Builder: US Navy    Location: Washington
43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics include VHF, (2) radars, (2) sounders, plotter, and ComNav autopilot. Includes OR 200 pot crab permit. Call for survey. Asking $180,000 for the package.
$575,000
thumbnail featured listing LC18-004  Landing Crafts You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1958    Length: 135    Hull: Steel    Builder: Gunderson Bros.    Location: Washington
135'x28.5' LCU landing craft, built in 1958 in Portland, OR. Twin John Deere 6125 mains rated at 340 hp ea., installed 2011. Twin Disc 514 gears. Kort nozzles. (2) Deere 4045 74 kW gen sets, installed 2012. Offset "doghouse" pilothouse. (3) seawater ballast tanks. Hydraulic ramp and (2) Palfinger deck cranes w/ wireless remotes. 8000 gallons fuel, 2000 water. Good electronics. Asking $575,000.
$195,000
thumbnail TN18-018  Tuna You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 42    Hull: Wood    Builder: Poulsbo    Location: California
42'x12.3'x6.8' wood troller rigged for crab, albacore, and black cod. Built by Poulsbo in 1949. Detroit 6-71 main. Fuel capacity of 500 gallons in (2) tanks. Entirely new hydraulic system in 2018. Includes (2) custom inserts for the fish hold, aluminum insert packs 5,500# crab, and insulated insert chills 4,500# fish w/ RSW system. Custom aluminum boom w/ Junes block. Deck equipment is setup to quickly transition between fisheries. Includes 175 pot CA crab permit with a baseline length of 44' (+5). Very well rigged boat with lots of recent upgrades. Call for more information. Asking $195,000.
$195,000
thumbnail TR18-044  Trollers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 42    Hull: Wood    Builder: Poulsbo    Location: California
42'x12.3'x6.8' wood troller rigged for crab, albacore, and black cod. Built by Poulsbo in 1949. Detroit 6-71 main. Fuel capacity of 500 gallons in (2) tanks. Entirely new hydraulic system in 2018. Includes (2) custom inserts for the fish hold, aluminum insert packs 5,500# crab, and insulated insert chills 4,500# fish w/ RSW system. Custom aluminum boom w/ Junes block. Deck equipment is setup to quickly transition between fisheries. Includes 175 pot CA crab permit with a baseline length of 44' (+5). Very well rigged boat with lots of recent upgrades. Call for more information. Asking $195,000.
$195,000
thumbnail CR18-041  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 42    Hull: Wood    Builder: Poulsbo    Location: California
42'x12.3'x6.8' wood troller rigged for crab, albacore, and black cod. Built by Poulsbo in 1949. Detroit 6-71 main. Fuel capacity of 500 gallons in (2) tanks. Entirely new hydraulic system in 2018. Includes (2) custom inserts for the fish hold, aluminum insert packs 5,500# crab, and insulated insert chills 4,500# fish w/ RSW system. Custom aluminum boom w/ Junes block. Deck equipment is setup to quickly transition between fisheries. Includes 175 pot CA crab permit with a baseline length of 44' (+5). Very well rigged boat with lots of recent upgrades. Call for more information. Asking $195,000.
$300,000
thumbnail BB18-040  Bristol Bay You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1986    Length: 32    Hull: Aluminum    Builder: Rozema    Location: Alaska
32'x13' aluminum, flush deck, RSW, Bristol Bay gillnetter, built by Rozema in 1986. Cummins 6CTA rated at 450 hp w/ Twin Disc 507 installed in 2015. Bow thruster. Rebuilt and tested IMS 7.5 ton RSW system. Recently insulated fish holds pack 14k lbs w/ zoned circulation. Maritime Fab drum w/ levelwind and power roller new in 2015. Electronics include new wiring, (3) GPS, Furuno radar, ComNav autopilot, and LED lights. Propane stove, diesel heater, (4) berths, head and shower. Many recent upgrades. Call for a survey. Asking $300,000.
Web Design, 3 Crown Creative