- Year:
- 1982
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Alaska
32’x14.5’ fiberglass Bristol Bay boat, built in 1982 by Modutech. Twin Caterpillar 3208 mains, rated at 260 hp each. Caterpillar marine gears. Makes 10 knots. 500 gallons fuel capacity. Packs 12k# in (10) insulated holds. IMS 7.5 ton RSW system. Kinematics deck e...
More Details- Year:
- 1944
- Length:
- 156
- Hull:
- Steel
- Builder:
- Ira Bushey and Sons
- Location:
- Washington
156’x30’x10.6’ steel, catcher processor, longline vessel, built for the Navy by Ira Bushey and Sons in 1944. Converted to LL, freezer processor in 2002. Cat 3512 main rated at 1280 hp w/ Twin Disc MG530 gear. (2) Cat 3406 w/ 320 kW gensets, plus backup Perkins gen....
More Details- Year:
- 1973
- Length:
- 41
- Hull:
- Fiberglass
- Builder:
- Custom, Monk design
- Location:
- Hawaii
41’x12’x6’ custom fiberglass tuna longliner and troller, built in 1973. Detroit 453 main rated at 140 hp w/ 1,500 hrs on rebuild and Borg Warner Velvet drive gear. 15kW Kubota genset. 650 gallon fuel capacity in (4) tanks. Packs 8,000 lbs in (3) fiberglass fish hold...
More Details- Year:
- 1970
- Length:
- 64
- Hull:
- Fiberglass
- Builder:
- Goldrupp
- Location:
- BC
64’x18’x8’ (6’ stern extension can be easily modified to 58’) fiberglass tender built in 1970 by Goldrupp. Cat 334 main rated at 240 hp. Twin Disc gear. 8 knot cruise, 10 knot WOT. Perkins aux. 120,000 pounds capacity with 30 ton RSW.Transvac pump, dewatering, grad...
More Details- Year:
- 1981
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x12.5’ aluminum Bristol Bay boat built by Shore in 1981. Packs 20k# in (8) fish holds. (3) bunks, full galley and head. 100 gallons water capacity250 gallons fuel capacity (gas). GPS and VHF. Needs new main engine. Reduced to $10,000.
More Details- Year:
- 1980
- Length:
- 38
- Hull:
- Wood
- Builder:
- Pettis Boat Works
- Location:
- Washington
38'x12'x4.7' wood troller, built in 1974 by Pettis Boat Works. Economical John Deere 4045, new in 2005. Good electronics with ComNav pilot, GPS, plotter, sounder, radar, new 3500W inverter, and more. New liferaft and epirb. Lots of recent work. Comes complete with...
More Details- Year:
- 1978
- Length:
- 90
- Hull:
- Steel
- Builder:
- Unkown
- Location:
- Alaska
90’x26’x7.5’ steel, twin screw tender vessel built in 1978, rebuilt in 1990. Twin Caterpillar D343T main engines, rated at 400 hp each. Tonanco TM8280 gear with 4.6:1 ratio and Twin Disc MG-514 gear with 4.5:1 ratio. 8k gallons fuel capacity in (2) steel tanks. 130...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- American Commercial
- Location:
- Alaska
32’x12’4”x36” fiberglass flush deck, RSW, Bristol Bay gillnetter built by American Commercial in 1980. Cat 3208 rated 265 hp and Twin Disc 506 gear. IMS 7.5 ton RSW new in 2015. Updated 8” Wesmar bow thruster and 8” Naiad stern thruster. Narrow reel, w/ Poclain drum...
More Details- Year:
- 1970
- Length:
- 65
- Hull:
- Fiberglass
- Builder:
- Hatteras Yacht Coporation
- Location:
- Oregon
65’x22’ fiberglass combination vessel built in 1970 by Hatteras Yacht Corp. Cummins NH/NT 855 main engine rated at 350 hp. ZF marine gear with 6:1 ratio. 7,700 gallons fuel capacity in (4) steel tanks. 500 gallons fresh water capacity. (3) crew cabins, full head and...
More Details- Year:
- 1974
- Length:
- 97
- Hull:
- Steel
- Builder:
- Lykes
- Location:
- California
97’x35’ Navy-built steel Sea Bee Lash built by Lykes in New Orleans, LA in 1970. Very little use and maintained to United States Navy standards. Dimensions 97.5’ x 35,’ with draft of 2’-10.5’. Recently inspected inside and out, found to be in above-average condition....
More Details- Year:
- 1979
- Length:
- 62' 3.5"
- Hull:
- Steel
- Builder:
- Monk design, OK Welding
- Location:
- California
62’3.5"x19’x10’ steel combination vessel rigged for trawl and tuna. Monk design, built by OK Welding in 1979. Cummins KT 1150 main w/ Twin Disc 514 gear. 6-cyl John Deer aux and 40kW Isuzu genset. 6,000 gal fuel capacity in (6) tanks. Blast freeze system, 5F40 comp...
More Details- Year:
- 1977
- Length:
- 54
- Hull:
- Fbr/wood
- Builder:
- Seaway
- Location:
- California
54’x16.2’x6’ fiberglass over wood combination vessel, rigged for crab, troll, and live bait seining. Built by Seaway in 1977. Detroit 871 main rated at 318 hp w/ 2,200 hrs on rebuild. Twin Disc 509 gear. 35kw Isuzu genset, new in 2018. Packs 20,000# in (4) tanked/i...
More Details- Year:
- 1970
- Length:
- 28.7
- Hull:
- Fiberglass
- Builder:
- C&M Manufacturing
- Location:
- California
28.6’x9’x3’ fiberglass cruiser rigged for crab and trolling, built by C&M Manufacturing in 1970. Cummins 6BTA main rated at 210 hp w/ 1,700 hrs. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and...
More Details- Year:
- 1976
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Vega Marine
- Location:
- Alaska
41’x13.2’x5.9’ Vega Marine troller built in 1976. Detroit 8V-71 main rated at 310 hp rebuilt in 2015 w/ Detroit Allison reduction gear. 9 kw Northern Lights genset. RSW deck tank. Rebuilt Simplex gurdies, slide out davits, hayrack, crab block and updated poles. Elec...
More Details- Year:
- 1982
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x12’x3’ aluminum Bristol Bay boat built in 1982 by Shore. Chevrolet 454 hp main engine. Borg Warner gear with 2.5:1 ratio. Makes (12) knots. Packs 16k# in (8) fish holds. VHF, GPS, sounder, plotter, and inverter. Asking $45,000.
More Details- Year:
- 1969
- Length:
- 48
- Hull:
- Fiberglass
- Builder:
- Westport
- Location:
- Oregon
48’x14’x5’ fiberglass crabber built by Westport in 1969. John Deere 6076 main rated at 310 hp, w/ approx 3,300 hrs. Twin Disc 509 gear. Noerthern Lights 6 kw genset w/ 8,000 hrs. New stainless rudder, prop, and shaft. (3) fish holds, but packs 4,200 lbs crab in alu...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- American Commercial
- Location:
- Alaska
32’x11.2’x36” Bristol Bay sternpicker built in 1980 by American Commercial. 8.2 Detroit main engine rated at 190 hp. ZF gear with 2:1 ratio. 10,000 pounds capacity in (10) insulated holds. Plumbed for RSW. Sliding reel, auto levelwind, Kinematics power roller and t...
More Details- Year:
- 1974
- Length:
- 93
- Hull:
- Steel
- Builder:
- Marine Power and Equipment
- Location:
- Alaska
93’x31’ steel combination vessel built in 1974 by Marine Power and Equipment. Lengthened and sponsoned at Duwamish Shipyard in 1991, new wheelhouse by Snow and Co. in 2019. GMC main rated at 940 hp. Twin Disc gear with 6:1 ratio. 232 kW Detroit 50 Series and 125 kW...
More Details- Year:
- 1969
- Length:
- 30
- Hull:
- Wood
- Builder:
- Bryant
- Location:
- Alaska
30’x10’ wood, Bristol Bay gillnetter built in 1969. GMC rated at 200 hp. Aluminum articulating net reel, hydraulic stern roller and anchor winch. Packs 8,000 pounds in (6) fish holds. (4) perths. Includes 300 fathoms of gear. Located in Naknek. Asking $10,000.
More Details- Year:
- 1943
- Length:
- 76.5
- Hull:
- Steel
- Builder:
- unknown
- Location:
- Alaska
76.5’x22’x5’ steel combination LC/tender vessel, originally built in 1943, rebuilt in 1985 and completely reconditioned in 2010. 50’x20’ deck space w/ 16’ drop gate. (2) CAT C9 mains each rated at 502 hp w/ ZF gears. New exhaust for all (5) engines in 2019. Plumbed...
More Details- Year:
- 1979
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Roberts
- Location:
- Alaska
32’x11’8”x36” fiberglass Bristol Bay gillnetter built by Roberts in 1980. Volvo Penta TAMD70E rated at 310 hp w/ 7,000 hrs. Twin Disc gear. All new hydraulics in 2019. Packs 12k lbs in (6) insulated fish holds, plumbed for RSW. Articulating aluminum reel w/ Kem dri...
More Details- Year:
- 1973
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- Alaska
38’x13.3’x7’ fiberglass power troller built by Thermodyne in 1973. Volvo MD70B main rated at 120 hp w/ Twin Disc 506 reduction gear. Fuel capacity of 375 gallons in (2) tanks. Insulated semi-tote fish hold packs 4,000 iced product. Fully rigged with all troll gear f...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Hydraulic Fishing Supply
- Location:
- Alaska
32’x12.5’ aluminum Bristol Bay gillnetter built by Hydraulic Fishing Supply in 1980. Cummins 6BTA rated at 250 hp w/ Newage Covington reduction gear. New exhaust, from the manifold up, to be installed. Maritime Fab stern roller, aluminum reel w/ Twister drive. 500 g...
More Details- Year:
- 1981
- Length:
- 110
- Hull:
- Steel
- Builder:
- Collier Shipbuilding, Inc.
- Location:
- Alaska
110’x26’x7.5’ steel supply vessel built in 1981 by Collier Shipbuilding. Twin Detroit 16V-71 mains rated at 478 hp ea, w/ Twin Disc 518 gears. Makes 11 knots. (2) 40kw Detroit 471 gensets. Fuel capacity of 25,000 gallons. Draws 7.5 loaded, 5’ light. 70’x24’ flush...
More Details- Year:
- 1992
- Length:
- 98
- Hull:
- Fiberglass
- Builder:
- Master Marine, Inc.
- Location:
- Washington
98’x27.5’x12’ fiberglass combination tender/dragger built by Master Marine, Inc in 1992. Cat 3512 rated at 1750 hp w/ top end rebuild in 2017. New Reintjes reduction gear, installed 2022. Cat 3408 300 kW and Cat 3306 150 kW gensets. Packs 300k lbs total in...
More Details- Year:
- 1990
- Length:
- 186
- Hull:
- Steel
- Builder:
- McDermott Shipyards
- Location:
- Washington
186’x40’ steel oceanographic research/utility vessel built in 1990 by McDermott Shipyards. Cummins KTA50M main engine rated at 1,250 hp. Reintjes gear with 7.053:1 ratio. Ulstein azumith stern drives, 300 hp each, with 3:1 ratio. Bow thruster. (3) Cummins VTA 600 k...
More Details- Year:
- 1970
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Albion
- Location:
- Alaska
36’x10.5’x5’ fiberglass troller/longliner, built in 1970 by Albion. Volvo MD70 rated at 120 hp, Capitol reduction gear. New Nidacore deck and rebuilt fish holds. Packs 12k lbs in (9) insulated fish holds. New sliding longline reel built by Precision Boatworks. Alumi...
More Details- Year:
- 1976
- Length:
- 37
- Hull:
- Fiberglass
- Builder:
- Ferrell
- Location:
- Alaska
37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...
More Details- Year:
- 1977
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Okabi
- Location:
- Alaska
36’x11’x4’ fiberglass sternpicker/dive boat built by Okabi Boat Work, in B.C., in 1977. Cummins 6BTA 5.9L rated at 210 hp. Borge Warner Velvet drive reduction gear. Rebuilt deck, cabin, and fish holds. (3) Insulated fish holds pack 10k lbs. Kem gear net reel, power...
More Details- Year:
- 1979
- Length:
- 124
- Hull:
- Steel
- Builder:
- Marine Industries Northwest
- Location:
- Washington
124’x32’x11’ factory trawler built in 1979 by Marine Industries Northwest. Man B&W Alpha model 10V23LU main engine rated at 1,450 hp. Alpha reduction gear. Twin 250 kW Cat 3406 B gensets. Fully operational factory. Approximately 190mt capacity for finished, frozen...
More Details