CR24-031

$550,000
Year:
1977
Length:
47
Hull:
Fiberglass
Builder:
Delta
Location:
California

CR24-031

47’x14’x5’ fiberglass Delta built in 1977 and rigged for crab and troll fisheries. Recently stretched and added aluminum top house. Cummins 855 main rated at 360 hp w/ Twin Disc 509 gear. Northern Lights 12kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Foa...

More Details

CR24-032

$310,000
Year:
2006
Length:
44
Hull:
Aluminum
Builder:
Edwing
Location:
Washington

CR24-032

44’x15’x5’ aluminum crabber built by Edwing in 2006. John Deere 6135SFM85 rated at 650 hp, new in 2021. Rebuilt Twin Disc MG511 reduction gear. Northern Lights 12kW gen set w/ wet exhaust, gen new in 2017. Packs 12k lbs crab in single fish hold. N.W. Propeller 20”...

More Details

CR24-030

$960,000
Year:
1974
Length:
58
Hull:
Fiberglass
Builder:
Kettenburg
Location:
California

CR24-030

58’x20’x8’ fiberglass vessel built by Kettenburg in 1974, and rigged for crab, salmon troll, and tuna. Cummins QS MII main rated at 455 hp. Twin Disc MGX 5114 gear. (2) 65kw John Deere 4045TFM gensets. 50-ton Sea Water RSW system w/ (2) compressors and spray brine s...

More Details

CO24-007

$500,000
Year:
2005
Length:
50
Hull:
Fiberglass
Builder:
William Perry
Location:
California

CO24-007

50’x21.5’x4’ fiberglass over wood combination vessel built in 2005 by William Perry in Canada, currently rigged as squid light boat. CAT C18 main rated at 469 hp, w/ Twin Disc MGX516 gear. 15kw Stamford and 50kw Kubota gensets. Fuel capacity of 2,000 gallons in (6) t...

More Details

CR24-029

$130,000
Year:
1979
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR24-029

32’x10’ fiberglass 1979 Radon, rigged for crab with CA 250-pot crab permit with a baseline length of 32’ LOA and CA salmon permit. Cummins CTA 450 hp main. 12 to 14 knot cruise, 18 knot WOT. 300 gallons fuel capacity. 2,000# hold capacity, 3,000# in totes on deck. Compl...

More Details

SK24-003

$45,000
Year:
1992
Length:
23
Hull:
Aluminum
Builder:
All-American
Location:
Washington

SK24-003

23’ aluminum All-American skiff built in 1992. 90 hp Honda 4-stroke outboard. 13 hp Honda power pack hydros by LFS. Gillnet reel w/levelwind and crab block. Hydraulic steering station. 22 gallon fuel tank with filter. Anchor gear, 12V batteries, and bilge pumps. D...

More Details

CR24-026

$125,000
Year:
1978
Length:
32
Hull:
Aluminum
Builder:
American Commercial
Location:
Oregon

CR24-026

32’x11.4’x5.5’ aluminum gillnetter rigged for crab, built in 1978 by American Commercial. 210 hp CAT 3208 main. Fuel capacity of 200 gallons in (2) tanks. Hydraulic steering w/ (3) stations. (4) insulated fish holds, (2) are tanked. Deck equipment includes crab dav...

More Details

SE24-013

$275,000
Year:
1979
Length:
50
Hull:
Steel
Builder:
Randy of Moss Landing
Location:
Washington

SE24-013

50’x16.4’x7.6 steel seiner/crabber built in Moss Landing, CA in 1979. John Deere 6090 rated at 330 hp w/ Twin Disc 5114 gear, both new in 2013. Isuzu B4BG1-B w/ 40 kW and new 12 kW gen sets. Packs 42k lbs in insulated fish hold. 30 ton titanium chiller, Carrier comp...

More Details

CR24-028

$350,000
Year:
1978
Length:
50
Hull:
Fiberglass
Builder:
Sunnfjord
Location:
Oregon

CR24-028

50’x15’x7’ fiberglass craber/troller built in 1978 by Sunnfjord. GMC 671 makes 250 hp, rebuilt in 2019. Twin Disc MG509 gear with 2.8:1 ratio. 30 kW Isuzu 4-cyl gen set. Packs 20k# crab in (1) fish hold. 10-ton RSW system. Accommodations include (2) staterooms wit...

More Details

CR24-027

$200,000
Year:
1971
Length:
50
Hull:
Steel
Builder:
Yaquina
Location:
Oregon

CR24-027

50’x14’x7’ steel crabber/troller built in 1971 by Yaquina. Caterpillar 3208 main engine makes 240 hp. Twin Disc 506 gear with 2.96:1 ratio. 25 kW Isuzu 4-cyl gen set. Packs 10k# in crab insert. Accommodations include v-berth, full galley, and head w/shower. Gear a...

More Details

TR24-019

$110,000
Year:
1946
Length:
40
Hull:
Wood
Location:
California

TR24-019

40’x12’x4.5’ wood combination vessel rigged for crab, longline, and trolling, built in 1946. Detroit 671 main w/ 11,000 hours on rebuild. Twin Disc 506 gear. Fuel capacity of 300 gal in (2) tanks. 10,000 lbs total hold capacity, 4,500 lbs in aluminum insert crab tan...

More Details

SE24-012

$625,000
Year:
1979
Length:
58
Hull:
Fiberglass
Builder:
West Lynn Marine
Location:
Washington

SE24-012

58’x17’x7’ fiberglass seiner/crabber built by Pelagic / Westlynn Marine (BC) in 1979. John Deere 6135 rated at 425 hp w/ Twin Disc 504b reduction gear. John Deere 4039 40 kW genset. New cutlass bearing 2023. Packs 115k lbs salmon and 35k lbs crab in (4) insulated, R...

More Details

CR24-025

$136,500
Year:
1972
Length:
27
Hull:
Fiberglass
Builder:
R. Thomas
Location:
California

CR24-025

27’5”x10’2” fiberglass crabber/troller built by R. Thomas, Brookings, OR in 1972. Detroit 353 rated at 103 hp, new in 2008. Borg Warner model 71-C reduction gear. Dry fish hold packs 2400# in (8) 300# boxes plus spillage Slush tank insert for salmon. Crab gear incl...

More Details

CR24-024

$200,000
Year:
1979
Length:
38
Hull:
Fiberglass
Builder:
Sunnfjord
Location:
California

CR24-024

38’x12.9’x6’ fiberglass Sunnfjord built in 1979 and rigged for crab, salmon, and open access. John Deere 6068 main rated at 266hp w/ Twin Disc gear. Northern Lights 4kw genset. 500 gallons fuel capacity in (2) tanks. Packs 3,000 lbs below deck, and another 4,000 in...

More Details

LL24-005

$300,000
Year:
2018
Length:
31
Hull:
Fiberglass
Builder:
Anderson Custom Boats
Location:
California

LL24-005

31’x10’ fiberglass longliner built by Anderson Custom Boats in 2018. Rigged for live market deliveries. Cummins DR6497-RX rated at 593 hp, installed 2023 w/ wet exhaust. Vee drive ZF286 reduction gear. Hydroslave longline hauler. (2) insulated fish holds w/ aerator...

More Details

PL24-003

$55,000
Year:
2002
Length:
21
Hull:
Fiberglass
Builder:
Parker
Location:
California

PL24-003

21.5’x8.5’x3.5’ fiberglass Parker 2120 w/ cuddy cabin, built in 2002. Twin 115hp Yamaha four stroke outboards w/ 1,529 hours. Top speed of 34 mph and burns 9.7 gph. Fuel capacity of 126 gallons in single tank. Electronics include GPS, VHF, radar, autopilot, and Garm...

More Details

CR24-023

$289,000
Year:
1991
Length:
44
Hull:
Fiberglass
Builder:
Main Marine
Location:
Washington

CR24-023

44’x14’x6’ fiberglass crabber built by Main Marine in 1991. Twin Cummins QSB6.7 mains rated at 425 hp each w/ ZF 301A gears and low hours. Northern Lights 20kw genset. Fuel capacity of 600 gallons in (2) tanks. Cruises at 14 kts. Packs 9,000 lbs crab in (5) tanked...

More Details

CO24-006

$2,000,000
Year:
1986
Length:
58
Hull:
Steel
Builder:
Mid Coast Marine
Location:
Washington

CO24-006

58’x22’x10’ steel combination vessel built in 1986 by Mid Coast Marine. New Yanmar main rated at 755 hp w/ completely rebuilt Twin Disc 5170 gear. John Deere 4045 65-kW and John Deere 4039 42-kW gensets. Packs 130k lbs salmon in main hold, plus bait freezer. 27 ton...

More Details

BB24-024

$700,000
Year:
2020
Length:
32
Hull:
Aluminum
Builder:
North River Boats
Location:
Alaska

BB24-024

32’x15.5’x36” aluminum, Bristol Bay gillnetter built by North River Boats in 2020.  Cruise at 23 kts, light.  Man i6 rated at 730 hp w/ ZF360A reduction gear and 5-blade SS prop.  Packs 17k lbs below deck in (8) double walled fish holds.  IMS 8.5 ton...

More Details

CR24-021

$100,000
Year:
1975
Length:
108
Hull:
Steel
Builder:
Marco
Location:
Washington

CR24-021

108’x27’x9’ steel crabber built by Marco in 1975. Vessel sunk and salvaged in 2024. Reported to pack approximately 360k# pinks in 7,500 cu ft. Machinery and electronics are presumed to not be operable. Asking $100,000, make offers. ******Additional Terms******* V...

More Details

TR24-015

$120,000
Year:
1973
Length:
40
Hull:
Aluminum
Builder:
Elmer W. McEachern
Location:
Oregon

TR24-015

40’x11.9’x4.8’ aluminum troller built by Elmer W. McEachern (BC) in 1973. John Deere 6068 rated at 210 hp w/ Twin Disc MG550 gear. Packs 10k lbs in (1) newly fiberglassed and insulated fish hold. Crab insert, davit, picking boom, hay rack, (4) single spool gurdies, p...

More Details

DV24-001

$100,000
Year:
1979
Length:
40
Hull:
Fiberglass
Builder:
Beck
Location:
Washington

DV24-001

40’x13’ fiberglass dive boat/crabber built by Beck in 1979. GMC 671 main engine rated at 250 hp. 750 gallons fuel capacity. Packs estimated 20k# in one fish hold. Tophouse design. (2) davits on deck. Accommodations include (4) berths, kitchen, and marine head. Re...

More Details

CR24-020

$3,200,000
Year:
1967
Length:
92
Hull:
Steel
Builder:
Pac Fish
Location:
Washington

CR24-020

92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...

More Details

SP24-009

$82,000
Year:
1974
Length:
38
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SP24-009

38’x13’ fiberglass gillnet/crab/shrimp vessel built in 1974 by Delta. Volvo TAMD61A main engine rated at 301 hp. Twin Disc MG-509 gear with 2:1 ratio. Burns 5 gph at 7.5 knots. 10 kW Isuzu LB31 gen set. Packs 15k# in (4) insulated fish holds. Deck equipment includ...

More Details

SE24-011

$315,000
Year:
1976
Length:
42
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SE24-011

42’x13’ fiberglass seiner/crabber built by Delta in 1976, overhauled in 2013-14. John Deere 6090 main engine rated at 330 hp. Twin Disc gear with 2.5:1 ratio. Burns 3.5 gph at 7 knots. 18 kW Mitsubishi gen set. Packs 28k# salmon. IMS 12.5 ton RSW system. Vickers...

More Details

CR24-019

$180,000
Year:
1976
Length:
38
Hull:
Fiberglass
Builder:
Delta
Location:
California

CR24-019

38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...

More Details

CR24-017

$225,000
Year:
1968
Length:
36
Hull:
Aluminum
Builder:
McQen
Location:
Washington

CR24-017

36’x12’x2’ aluminum, crabber, Monk design, hull built by McQen in 1968. Hull stored inside, under cover until finished in 2018. Makes 32 knots. Recently installed Volvo D6 rated at 370 hp, w/ apprx 1400 hrs. Humbyrd 15” crab block and hydraulic davit. 16 GPH hydrau...

More Details

CR24-018

$150,000
Year:
1976
Length:
37
Hull:
Aluminum
Builder:
Freeman Marine
Location:
Oregon

CR24-018

37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...

More Details

CR24-016

$25,000
Year:
1985
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR24-016

32’x10’x3.6’ fiberglass Radon built in 1985, rigged for crab and salmon. Twin GM 383 gas engines rated at 250hp each. Does 20kts. Fuel capacity of 250 gallons in one tank. Fish hold packs 1,600 lbs crab. Deck equipment includes crab block, davit, boom w/ winch, sal...

More Details

CO24-004

$780,000
Year:
1995
Length:
58
Hull:
Steel
Builder:
Studeman
Location:
Oregon

CO24-004

58’x20’x9.5’ steel combination vessel built in Reedsport, OR by Scott Studeman in 1995. John Deere 6135 main rated at 425hp w/ Twin Disc 5114 gear. (2) John Deere 4045 65kw gensets. Fish hold w/ removable partitions packs 33,000 lbs crab w/ aft section as bait freeze...

More Details

Sign up for email updates