Vessels - Sternpickers

23’ aluminum All-American skiff built in 1992. 90 hp Honda 4-stroke outboard. 13 hp Honda power pack hydros by LFS. Gillnet reel w/levelwind and crab block. Hydraulic steering station. 22 gallon fuel tank with filter. Anchor gear, 12V batteries, and bilge pumps. D...

38’x12’x6’ fiberglass sternpicker built by Wegley and finished by Rozema in 1995. Volvo TAMD 122P rated at 600 hp, with 6,500 hrs on 2015 rebuild. ZF reduction gear w/ 1.50:1 ratio. Fuel capacity of 600 gallons in (2) tanks. IMS 8.5-ton hydraulically driven RSW syst...

36’x10.5’x4’ fiberglass sternpicker, built by Albion in 1970. Volvo MD-70A rated at 140 hp. Capitol 2HEA reduction gear, includes spare gear. New hydraulic pump in 2024. Packs 10,000 in (7) holds setup for slush bags. KEM hydraulic drum and McElroy 40” hydraulic st...

38’x13’ fiberglass gillnet/crab/shrimp vessel built in 1974 by Delta. Volvo TAMD61A main engine rated at 301 hp. Twin Disc MG-509 gear with 2:1 ratio. Burns 5 gph at 7.5 knots. 10 kW Isuzu LB31 gen set. Packs 15k# in (4) insulated fish holds. Deck equipment includ...

36’x12.5’x3.5’ fiberglass gillnetter built by Roberts in 1970. CAT 3126b main rated at 450. ZF reduction gear, new in 2019. Fuel capacity of 400 gallons in (2) tanks. Packs 10,000 lbs in (5) tanked and insulated fish holds. Deck equipment includes gillnet reel, lev...

32’x11.5’ fiberglass sternpicker built in 1978 by Roberts. Volvo TAMC70D main engine rated at 260 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Packs 9k# in (6) insulated fish holds. Deck equipment includes Maritime Fab drum, levelwind, rower roller, and...

30’x10’x3’ fiberglass Columbia River gillnetter, built by Blix in 1969. John Deere 4045 main rated at 210 hp, w/ Velvet Drive gear. Cruises at 9 knots. 7.5 Vickers hydraulic pump w/ electric clutch. Fish hold packs 4,200 lbs. Includes reel w/ levelwind and hydrauli...

34’x12’ aluminum combination vessel built in 1987 by American Welding. Set up for gillnet, crab, longline, and dive fisheries. Isuzu A6BGITQW main engine rated at 180 hp. (3) fish holds, slush ice. Deck equipment includes crab block. longline hauler, gillnet drum, a...

36’x11’x4.5’ fiberglass RSW sternpicker built by Albion in 1980. John Deere 6068 main rated at 201 hp, w/ 8,900 hours. ZF 220 gear w/ 2.5:1 ratio. 6.5 cube load sensing hydraulic pump off main, 20 gpm at idle. 380 gallon fuel capacity. Pac West 3-ton RSW system chi...

47’x14’x8.5’ fiberglass combination vessel rigged for gillnet, crab, salmon, and longline. Delta laid hull finished by private party in 1983. Detroit 671 main rated at 200 hp, w/ only 750 hours on rebuild. Twin Disc 509 gear. 10kw Isuzu genset. Packs 15,000 lbs cr...

42’x14’x5’ aluminum stern picker built in 1992 by American Eagle Mfg in LaConnor, WA. Twin Volvo TAMD 71B each rated at 380 hp, port side main rebuilt in 2019. Includes total rebuild kit. ZF reduction gears. Packs 20k lbs in (3) insulated holds w/ bins. (2) 6 cu. R...

39’x12’x3.5’ fiberglass gillnetter build by Northwind Boats in 1972. Volvo TAMD main rated at 300 hp w/ low hours on rebuild. Capitol Marine reduction gear. Fuel capacity of 300 gallons in (2) tanks. Packs 8,000 lbs in (8) insulated fish holds (1,000 lbs each). Dec...

32’x16’ aluminum combination vessel Built by All Points in 1990. Currently rigged to longline and can be converted to gillnetter in Bristol Bay. John Deere 6125 AFM01 main rated 480 hp w/ ZF305A reduction gear. Lugger Northern Lights 8kW genset. PacWest 10 ton hydra...

37’x12’ fiberglass gillnetter built by Wegley in 1992. Volvo Penta TAMD122A rated at 480 hp. PacWest 7.5 ton RSW, new in 2016. Packs 10k lbs in (8) holds w/ (2) zones. Kolstrand chain drive reel w/ levelwind and power roller. 440 gallons fuel combined in (2) tanks....

40’x11’x5’ fiberglass gillnetter/troller/longliner built by Barrie Ferrell/Snoball in 1977. Caterpillar 3208 NT main engine rated at 210 hp. Twin Disc 502 gear. Packs 10,000 in ice in (6) fiberglass insulated slush tanks. Deck equipment includes KEM drum w/ levelwin...

39’x14’x5.5’ LaConner fiberglass sternpicker/crabber built in 2018. Volvo Penta D13 main engine rated at 600 hp. Twin Disc MGX5126A gear with 2.5:1 ratio. Makes 10 knots. 8” bow thruster. Packs 17k# salmon in (7) insulated holds. IMS 5 ton RSW system. Deck equipm...

36’x11.5’x6.5’ fiberglass sternpicker built by Marben in 1979. John Deere main engine rated at 200 hp. 400 gallons fuel capacity. Packs 10k# in (3) insulated fish holds. IMS 7.5 ton RSW system. Deck equipment includes Kolstrand reel w/levelwind and power roller. E...

42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...

42’x14.5’x4’ fiberglass gillnetter built by Polar Boat Works, AK in 1990. John Deere 6081AFM75 rated at 375 hp w/ Twin Disc 5111. Lugger Northernlights 5.5 kW genset. Makes 10 knots at 9.5 gph fuel consumption. Packs 30,000 in (3) insulated fish holds. Aluminum art...

41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...

32’x13’x36” aluminum, flush deck, RSW, gillnetter built by Sagstad in 1978.  Brand new Cummins QSB 6.7L rated at 375 hp installed and operational. Twin Disc MG 506 reduction gear.  Updated IMS 8.5 ton RSW installed in 2017. Packs 12k lbs in (6) updated,...

42’x14’ aluminum gillnetter built in 1990 by La Conner Boat Works. John Deere 6125TA main engine rated at 525 hp, 4500 hours. ZF gear, recently rebuilt. Packs 20k# in (2) insulated fish hold. 600 gallons fuel capacity in (2) tanks, 50 gallons fresh water capacity. De...

36’x11’x5’ aluminum Shore built in 1968, INCLUDING CA 400 pot crab permit good to 69’10” mloa. Crusader 454 main rated at 350 hp, w/ less than 500 hours. Insulated fish hold packs 16,000 lbs. Deck equipment includes net reel and power roller. Electronics include GPS...

38’x12’x5’ fiberglass gillnetter built by Marbin in 1979. Deere 6068TFM75 main engine rated at 200 hp. Twin Disc gear with 2:1 ratio. Troll valve on reduction gear. Makes 7 knots at (3) GPH. 400 gallons fuel capacity. Packs 8k# in (7) insulated fish holds. Electr...

37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...

36’x11’x4’ fiberglass sternpicker/dive boat built by Okabi Boat Work, in B.C., in 1977. Cummins 6BTA 5.9L rated at 210 hp. Borge Warner Velvet drive reduction gear. Rebuilt deck, cabin, and fish holds. (3) Insulated fish holds pack 10k lbs. Kem gear net reel, power...

36’x12.5’x7’ fiberglass gillnetter built by Frostad in 1987. Canadian vessel, no ad-measurement, but only 6 net tons. Volvo MD71 main rated at 357 hp, w/ Twin Disc 507 gear. Fuel capacity of 400 gallons in (4) tanks. Packs approx. 12,000# in (4) tanked/insulated hol...

38’x11.2’x6.9’ fiberglass sternpicker built by Kachemak Marine in 1983. Cat 3208TA rated at 425 hp w/ rebuilt Twin Disc 507 gear. Packs 20k lbs in (4) updated and insulated fish holds. Kem Marine sliding reel, Kinematic levelwind and stern roller. Vickers single st...

39.5’x12.5’x3.7’ fiberglass sternpicker/troller built by Westport in 1970. Recently installed factory remanufactured Cat 3208NA rated at 215 hp. Twin Disc 506 reduction gear w/ 3:1 ratio. Stretch and composite aft-deck work by Sunfjord. Packs 10k lbs in (6) insulat...

32'x12' aluminum sternpicker built by Marco in 1959. Detroit 4-53 w/ approx. 5,500 hours. Borg Warner 72C gear. Sound Marine roller, aluminum reel w/ Twister drive. Vickers V-20 hydraulic pump and belt drive wash down pump. (2) 100 gallon fuel tanks. Electronics i...