Vessels - Combination

58’x20’x8’ fiberglass vessel built by Kettenburg in 1974, and rigged for crab, salmon troll, and tuna. Cummins QS MII main rated at 455 hp. Twin Disc MGX 5114 gear. (2) 65kw John Deere 4045TFM gensets. 50-ton Sea Water RSW system w/ (2) compressors and spray brine s...

50’x21.5’x4’ fiberglass over wood combination vessel built in 2005 by William Perry in Canada, currently rigged as squid light boat. CAT C18 main rated at 469 hp, w/ Twin Disc MGX516 gear. 15kw Stamford and 50kw Kubota gensets. Fuel capacity of 2,000 gallons in (6) t...

58’x22’x10’ steel combination vessel built in 1986 by Mid Coast Marine. New Yanmar main rated at 755 hp w/ completely rebuilt Twin Disc 5170 gear. John Deere 4045 65-kW and John Deere 4039 42-kW gensets. Packs 130k lbs salmon in main hold, plus bait freezer. 27 ton...

58’x21’x10.5’ steel seiner package w/ skiff and permits, built in 1992 by Bill Berggren. Cummins KTA-19 main rated at 500 hp w/ Twin Disc reduction gear. Northern Lights 60kw and Northern Lights 30kw gensets. 20-ton RSW system w/ titanium chillers. Pakcs 116,000 lbs...

58’x23’x10’ steel combination seiner/pot/LL/trawler built by Van Peer in 1994. Extensive shipyard at Platypus in 2018. Yanmar 6AYM-FT main rated at 755 hp, new in 2018. Twin Disc MG5222 gear w/ 6:1 ratio. John Deere 99 kW and Kubota 28 kW gensets both new in 2018. P...

58’x20’x9.5’ steel combination vessel built in Reedsport, OR by Scott Studeman in 1995. John Deere 6135 main rated at 425hp w/ Twin Disc 5114 gear. (2) John Deere 4045 65kw gensets. Fish hold w/ removable partitions packs 33,000 lbs crab w/ aft section as bait freeze...

87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...

167’x46’x16’ combination catcher/processor vessel built in 1978 by Maxon Industries. Twin Caterpillar 3508 main engines rated at 850 hp each, in-framed 2023. Caterpillar 7261 marine gears with 5.11:1 ratio. (2) 190 kW Caterpillar 3306 and 55 kW Caterpillar gen sets....

72’x22’x10’ steel combination vessel. Monk-design, built by Duke’s Welding in 1980. Currently set up as a crabber/shrimper/tuna. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW...

36’X13’ Aluminum crabber built by Velocity Marine in 2022, like new. Twin Suzuki 350 Dual prop outboards rated at 350 hp each. 850 hrs. 18 knot cruise, 35 knots top speed. MER 22Kw gen set Model MGM-KNI three-phase gen set with front mounted with Pitts clutch. 300 ga...

47’x14’x8.5’ fiberglass combination vessel rigged for gillnet, crab, salmon, and longline. Delta laid hull finished by private party in 1983. Detroit 671 main rated at 200 hp, w/ only 750 hours on rebuild. Twin Disc 509 gear. 10kw Isuzu genset. Packs 15,000 lbs cr...

58’x19.5’ fiberglass combination/seiner built By Delta in 1981. Caterpillar 3408 main engine rated at 365 hp. Twin Disc MG54C gear with 4.5:1 ratio. 40 kW John Deere and 25 kW Isuzu gen sets. New exhaust on main in 2019.  4900 gallons fuel capacity. Packs...

68’x21’x7’ steel combination longline/tender/pot boat built by Peterson Boat Building in 1974. John Deere 6125AFM75 rated at 400 hp, new in 2008. Twin Disc 516 gear new in 2008. (2) John Deere 6068 100kW gensets w/ updated exhaust. Packs 120k lbs salmon in (2) insula...

58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...

55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...

58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...

58’x24’x8’ steel combination vessel built by Peacock in 1980. Sponsoned by Wahl. Cummins QSK19 main engine rated at 660 hp. Twin Disc MG-5202 gear with 4.5:1 ratio. 90 kW John Deere 6068 and 25 kW Isuzu gen sets. Packs 140k# salmon. 25 ton IMS RSW system. Deck equ...

58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...

65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...

34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...

66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. Twin John Deere gen sets, 65 kW and 45 kW, recently installed. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 26-ton...

85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....

84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...

59’x17’x7’ steel crabber built by Martinolich in 1966. Caterpillar D343 main engine makes 400 hp, 1500 hours on rebuild. Twin Disc MG514 gear with 4.5:1 ratio. Makes 7 knots. (2) 20 kW Northern lights gen sets. 2,250 gallons fuel capacity in (3) tanks. Packs 50k#...

47’x15’x5.5’ custom built lobster boat. Keel laid by Long Beach Boatyard (CAN) in 2005, owner completed in 2017. Twin John Deere 8.1 mains rated at 380 hp each, both w/ low hours. ZF 280-1A gears. Isuzu 15kw genset. Fuel capacity of 1,000 gallons. Packs an estimated...

80’x29’x11’ steel dragger/combination vessel built in 1980 by Allied Shipyard, overhauled in 2001. Cat 3508 main engine rated at 805 hp. Twin Disc 540 gear. Makes 9 knots. Isuzu rated at 350 hp drives hydraulics. 100 kW Isuzu and 33 kW Daewoo gen sets. (2) 88 hp D...

53’x15’x3.5’ fiberglass Beck/LeClerq combination vessel, built in 1986. Currently rigged as a crabber. Lugger 6125 main engine rated at 410 hp. Makes 7.5 knots at 9 gph. Twin Disc 509TD gear with 2:1 ratio. 30 kW Isuzu gen set. Packs 20k# crab,40# of salmon in (1)...

38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...

53.1’x14.7’x8’ steel crabber/troller combo vessel, built in 1967 by Wilwerding. 250 hp Cummins 855 main w/ Twin Disc 509 gear. Isuzu C240 20kw genset. Fuel capacity of 2,600 gallons in (3) tanks. Fish hold packs 20 tons tuna, and has 10k lb crab tank insert. Spray...

68’x20’x8’ wood shrimp trawler w/ permits, built by Toche Boats in 1965. 855 Cummins main rated at 325 hp, w/ Twin Disc 509 gear. Isuzu 4JB1 30kw genset. Fuel capacity of 2,800 gallons in (4) tanks. Fish hold capacity of 50,000 lbs shrimp. Deck equipment includes h...