- Year:
- 1978
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Puget Trawler
- Location:
- Washington
45’x15’x4’ fiberglass cruiser built by Puget Trawler in 1978. Ford Lehman 350 main engine. Two steering stations. Accommodations include stateroom, salon area, full galley with stove, fridge, and sink, (2) heads with showers, hot water, and heating throughout. Elect...
More Details- Year:
- 1989
- Length:
- 58
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Washington
58’x19’ aluminum seiner/crabber built by Shore in 1989. Caterpillar 3408 main engine rated at 365 hp. Twin Disc 514 gear with 3.5:1 ratio. Burns 7 gph at 9 knt cruise. 28 kW Isuzu 4LEI Turbo and Isuzu 6RB1 gen sets. Packs 80k# salmon in (4) insulated fish holds. 1...
More Details- Year:
- 2016
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Aliotti Enterprises
- Location:
- Alaska
32’x15.5’ aluminum Bristol Bay boat built in 2016 by Aliotti. Twin Cummins QSC8.3500KC, keel-cooled mains make 600 hp each. ZF 286 gears and Ultra Jet water jets. Cruises at 22 knots. Gets on step with 12-14k#. Packs 25k# under the hatches in double-walled fish hold...
More Details- Year:
- 1986
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Work Boats Northwest
- Location:
- Alaska
32’x13.5’ aluminum Bristol Bay vessel built by Work Boats Northwest in 1986. Volvo TAMD70E main engine makes 310 hp. Twin Disc gear with 2:1 ratio. Vickers hydraulics. Packs 14k in (5) fish holds. IMS 8.5 ton RSW system. Sound Hydraulics power roller and reel and...
More Details- Year:
- 1993
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Winterhalter
- Location:
- Washington
32’x13.5’ fiberglass Bristol Bay boat built by Winterhalter in 1993. Renovated in 2025. New, factory reman, 8.3L Cummins main engine installed in 2025 makes 430 hp. Cruises at 14 knots. Twin Disc MG507 gear with 2:1 ratio. 8” Niad bow thruster. Eaton 6 and 4.8...
More Details- Year:
- 1923
- Length:
- 65
- Hull:
- Wood
- Builder:
- Conrad Anderson
- Location:
- Washington
65’x18’x7.9’ wood Puget Sound seiner/tender, built in Gig Harbor by Conrad Anderson in 1923. Extensively refitted including planking, frames, deck, beams, stringers, stem to stern bulwarks, rigging, fuel tanks, electrical and more. Detroit 8V-71 main rated at 250 hp w...
More Details- Year:
- 1981
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Shore
- Location:
- Alaska
32’x11.5’x36” aluminum, RSW, flush deck, Bristol Bay gillnetter built by Shore in 1981. Repowered w/ John Deere 6068 rated at 201 hp w/ 4k hrs and Twin Disc 5050 reduction gear. PacWest 10 ton RSW system. Packs 11k lbs in (8) insulated and fiberglassed fish holds. S...
More Details- Year:
- 1998
- Length:
- 34
- Hull:
- Fiberglass
- Builder:
- Northshore
- Location:
- Washington
34’11”x13’8”x4’ fiberglass, lobster style, crabber/sternpicker built by Northshore in 1998. Cruises at 12 knots, makes 20 knots. Cummins QSB 6.7L rated at 425 hp w/ wet exhaust and ZF280 reduction gear. Crab deck gear includes hydraulic davit, Junes 15” crab block,...
More Details- Year:
- 1996
- Length:
- 32
- Hull:
- Alumiinum
- Builder:
- Edwing
- Location:
- Alaska
32’x16’ triple-jet Bristol Bay boat, built in 1996 by Edwing. Port and stbd Caterpillar 3116 main engines rated at 350 hp each with Twin Disc 505A gears. Center Caterpillar C7.1 rated at 425 hp, direct drive. Makes 30 knots WOT, 21-26 knot cruise. Packs 15k# in (6)...
More Details- Year:
- 1965
- Length:
- 110
- Hull:
- Steel
- Builder:
- Harbor Boat Building
- Location:
- Alaska
110’x32’x3.5’ steel commercial utility barge built in 1965. Converted to a self contained ice barge in 2008. Built to support the Bristol Bay fishing fleet. Deck level w/ galley, office, laundry, shop, ice room, AC generator space, knuckle crane and heli-pad topside....
More Details- Year:
- 1987
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- American Welding
- Location:
- Alaska
34’x12’ aluminum combination vessel built in 1987 by American Welding. Set up for gillnet, crab, longline, and dive fisheries. Isuzu A6BGITQW main engine rated at 180 hp. (3) fish holds, slush ice. Deck equipment includes crab block. longline hauler, gillnet drum, a...
More Details- Year:
- 1967
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Skookum Boatworks
- Location:
- Washington
44’x14’x6’ fiberglass troller/longliner built by Skookum Boatworks in 1967. John Deere 6068 rated at 200 hp. Twin Disc 506 gear w/ 3:1 ratio. IMS hydraulic 7.5 ton refrigeration system can be used for spray brine or RSW. Insulated fish hold packs 8 tons. Kolst...
More Details- Year:
- 1992
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Maritime Fabrication
- Location:
- Alaska
32’x13’x36” fiberglass, flush deck, top house, Bristol Bay gillnetter built by Maritime Fab in 1992. Lugger 6125A rated at 460 hp w/ ZF310A gear. Maritime Fab. fixed reel, w/ auto levelwind and 36” stern roller. IMS 7.5 ton RSW system. Bow thruster. Packs 13k lbs i...
More Details- Year:
- 1945
- Length:
- 69
- Hull:
- Wood
- Builder:
- Hanson
- Location:
- Washington
69’x18’ wood longliner built by Hanson Boat Co. in 1945. Caterpillar 353 main engine rated at 425 hp, installed in 2022. Twin Disc 521 gear with 4:1 ratio. Cruises at 9.5 knots. 30 kW Kubota and 18 kW Yanmar gensets. 3600 gallons fuel capacity in (4) tanks. Packs...
More Details- Year:
- 1999
- Length:
- 40
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Washington
40’x14’x5’ custom aluminum troller/pleasure vessel, built by Rozema Boat Works in 1999. Cummins 6CTA 8.3 main rated at 450 hp, w/ 2,700 hours. Twin Disc w/ troll valve. Northern Lights/Lugger 5kw genset. Fuel capacity of 400 gallons in (2) tanks. (2) insulated fish...
More Details- Year:
- 1983
- Length:
- 65
- Hull:
- aluminum
- Builder:
- Swiftship Boat
- Location:
- Oregon
65’x17’x6’ aluminum, charter/research vessel built by Swiftship Boat in 1983. Current COI for 55 persons. Cruise between 15 kts and 22 kts. Recently installed John Deere 6090 SFM85 and remaned Detroit 12V71-TTI w/ Twin Disc 5114 reduction gears. New Northern Lights...
More Details