Vessels - Tenders

90’x28’x3’ steel Bristol Bay tender built in 1977 by Barbour Boats, retrofitted in 2019-2020. 3408 Caterpillar port main makes 500 hp and 3408 Caterpillar starboard main makes 700 hp. Twin Disc gears. New port shaft 2024, new shaft starboard 2022. Twin Caterpillar C...

110’x25.5’ steel tender vessel built by North American in 1979. Twin GMC main engines rated at 550 hp each. Twin Disc MG521 gears. Cruises at 10 knots. 250 kW John Deere 6081, 175 kW Cummins NTC350, and 125 kW John Deere 4045 gen sets. Packs 210k# in (4) fish holds...

64’x17.5’x8’ aluminum Canadian seiner set up to tender salmon. Built by Matsumoto Shipyards in 1974. Cat 3406 rated at 265 hp w/ Twin Disc MG514 gear. Packs 90k lbs combined in (2) fiberglass fish holds. Cold Sea 40 ton RSW w/ 35 hp compressor and all new circ plumb...

108’x27’x9’ steel crabber built by Marco in 1975. Vessel sunk and salvaged in 2024. Reported to pack approximately 360k# pinks in 7,500 cu ft. Machinery and electronics are presumed to not be operable. Asking $100,000, make offers. ******Additional Terms******* V...

88’x22.5’ steel tuna vessel built by D&T Marine in 1991. Cummins KTA1150 main engine rated at 500 hp. Twin Disc MGX516 with 6:1 ratio. 8.5 knot cruise. Twin 60 kW Cummins 6BT gen sets, (1) 30 kW Cummins 4B gen set. 14k gallons fuel capacity in (10) tanks. (4) fish...

92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...

87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...

84’x20’x12’ wood gillnet tender / charter vessel, built by Johnson Brothers for the US Bureau of Fisheries in 1928. Completely rigged for tendering but also set up for chartering with (3) passenger staterooms, plus crew quarters, (2) heads w/ showers, large comfortable...

59.5’x24.5’ steel, shelter decked, schooner rigged for longline, pot, and tendering. Built in 2000 by Alley & Nichols. New in 2024, John Deere 6135 rated at 420 hp main. Rebuilt Twin Disk MG5114 reduction gear. Lugger 32 kW and Northern Lights 8 kW gensets. Chills 1...

112.5’x26’x8’ steel tender vessel originally built in 1939 by the US Navy, converted in 1985. GMC 1671 main engine rated at 700 hp. 250 kW Caterpillar 3306, 150 kW GMC 871, and 90 kW Caterpillar 3304 gensets. Packs 400k# in (4) insulated fish holds. (2) 50-ton RSW sy...

53’x15.6’x7’ Delta Marine combination vessel built in 1979, rigged for seine, longline, crab, and jig fisheries. Detriot 60 series main rated at 450 hp w/ Twin Disc gear. Isuzu 35kw genset. Fuel capacity of 2,200 gallons in (4) tanks. IMS 18-ton RSW system. Packs 4...

107’x30’x11’ steel aft-house crabber built in 1979 by Bender. Twin Caterpillar D3412 main engines rated at 624 hp each. Twin Disc MG-520 gears. Twin 225 kW Caterpillar 3406B gensets. 33k gallons fuel capacity. Packs 120k# king crab, 165k# opilio, 330k# sockeye. (2)...

52’x17’x4’ fiberglass seiner built by Roberts in 1991. Lugger 6125 main rated at 400 hp. ZF400 gear w/ 2:1 ratio. Isuzu 4JBl 25kw genset. Fuel capacity of 950 gallons in (2) tanks. Insulated fish hold packs 55,000 lbs. 15-ton RSW system. Deck equipment includes K...

68’x21’x7’ steel combination longline/tender/pot boat built by Peterson Boat Building in 1974. John Deere 6125AFM75 rated at 400 hp, new in 2008. Twin Disc 516 gear new in 2008. (2) John Deere 6068 100kW gensets w/ updated exhaust. Packs 120k lbs salmon in (2) insula...

114’x30’x11’ steel, single-crew crabber/tender built at Fairhaven Shipyard in 1973. Caterpillar 3512DI main engine rated at 1207 hp. Caterpillar 7261 gear with 3.84:1 ratio. Cruises at 10 knots. 180 kW Caterpillar 3306 and 190 kW Caterpillar 3306 gen sets. 40,000 g...

58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...

125’x32’x9’ steel tender built by Burton Shipbuilding in 1957. Twin Mitsubishi S6B3-MPTA mains rated at 385 hp each. Tonasco gear on port engine and Twin Disc 514 on starboard. John Deere 200kw and Northern Lights 40kw gensets. 17,000 gallon fuel capacity in (10) tan...

126’x30’x12’ steel house-aft crabber/tender vessel built in 1949 by FB Walker and Sons, Inc. Twin Caterpillar 3408 DI main engines rated at 365 hp each. Twin Disc MG514 gears with 6:1 ratio. Twin 180 kW Caterpillar 3306 TA and (1) 40 kW John Deer 4045DFM70 gensets. P...

100’x25’x12’ steel, tender/crabber built by Toche Enterprises Inc in 1973. Converted to a Bering Sea crabber and lengthened 10’ in 1975. Detroit 16V71 rated at 480 hp w/ Capitol HPC10500 gear w/ 6:1 ratio. (2) Detroit 671 135 kW and Yanmar 45 kW. Packs 210k lbs salm...

65’x19’x7’ steel tender built by the Raymond Dugat Company in 1957. Twin Detroit 671 mains rated at 165 hp each w/ Twin Disc 509 gears. Kubota 28kw MER genset. Fuel capacity of 4,200 lbs in (4) tanks. IMS titanium 23-ton RSW system, new in 2016. Packs 90,000 lbs in...

79’x21x4.5’ steel, US Army LCM-8 built in 1954, converted to tender in 2014. Twin Cat 3406T mains rated at 335 hp w/ Twin Disc MG514-C gears, 2:1 ratio. Kort nozzles refurbished in 2015. John Deere 90kW and Cummins 45 kW gensets. 200k# capacity in (2) insulated fish...

66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. Twin John Deere gen sets, 65 kW and 45 kW, recently installed. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 26-ton...

104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...

84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...

63’x25’x6.4’ wooden Whatcom County ferry converted over to a AK tote tender. Built by Bellingham Ship in 1929. Detroit 671 rated at 150 hp and Twin Disc 509 gear w/ 4:1 ratio. Isuzu 20kW genset. Shallow V bottom, single flush deck, steel house and galvanized bulwarks...

71’x19’ wood tender vessel built in 1931 by Menchins. Caterpillar 343A main engine rated at 365 hp, rebuilt in 2018. Caterpillar 5L3968 gear with 6:1 ratio. Burns 8 gph at 8 knots. 2200 gallons fuel capacity in (2) tanks. Low-hours GMC 471 auxiliary w/PTO and new g...

78’x22.6’x11’ steel combination built by Berg in 1975. Rigged for tendering, longline and pots. GMC 12-V149 main rated at 725 hp. GMC 671 90 kW and Lugger 55 kW gensets. Packs 168,000 lbs cod in (2) insulated fish holds. 30 ton RSW system w/ new compressor, (2) cir...

150’x38’x16’ steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds, extensiv...

48’x14’x7.7’ steel crabber, Troyer design, built by St. Clair in 1978. Isuzu UM6Hk1 rated at 350 hp w/ Twin Disc 509 gear. Isuzu 20kW genset. (2) insulated fish holds pack approx. 40k lbs salmon. Recent work includes blasted/painted hull, lazerette, boom and new wat...

56’x14’x4’ steel, combination tender/LCM, built by US Navy in 1967. Ideal setnet tender. Twin Cummins 6BTA each rated at 250 hp w/ Twin Disc 506MG gears. Northern Lights 20 kW genset and self contained John Deere 4045 w/ 30 kW genset. Usable deck space measures 30’x...