- Year:
- 1985
- Length:
- 38
- Hull:
- Fiberglass
- Location:
- Washington
38’x11’x8’ custom fiberglass troller/longliner built in 1985. John Deere 4045TFM main engine rated at 135 hp. Borg Warner Velvet Drive gear with 2.91:1 ratio. Makes 7 knots, burns 2 gph. Packs 9k# in (1) fish hold w/slush bags and brailer bags. (3) bunks in fo’c’sl...
More Details- Year:
- 1978
- Length:
- 50
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Oregon
50’x15’x7’ fiberglass craber/troller built in 1978 by Sunnfjord. GMC 671 makes 250 hp, rebuilt in 2019. Twin Disc MG509 gear with 2.8:1 ratio. 30 kW Isuzu 4-cyl gen set. Packs 20k# crab in (1) fish hold. 10-ton RSW system. Accommodations include (2) staterooms wit...
More Details- Year:
- 1946
- Length:
- 40
- Hull:
- Wood
- Location:
- California
40’x12’x4.5’ wood combination vessel rigged for crab, longline, and trolling, built in 1946. Detroit 671 main w/ 11,000 hours on rebuild. Twin Disc 506 gear. Fuel capacity of 300 gal in (2) tanks. 10,000 lbs total hold capacity, 4,500 lbs in aluminum insert crab tan...
More Details- Year:
- 2018
- Length:
- 31
- Hull:
- Fiberglass
- Builder:
- Anderson Custom Boats
- Location:
- California
31’x10’ fiberglass longliner built by Anderson Custom Boats in 2018. Rigged for live market deliveries. Cummins DR6497-RX rated at 593 hp, installed 2023 w/ wet exhaust. Vee drive ZF286 reduction gear. Hydroslave longline hauler. (2) insulated fish holds w/ aerator...
More Details- Year:
- 1986
- Length:
- 58
- Hull:
- Steel
- Builder:
- Mid Coast Marine
- Location:
- Washington
58’x22’x10’ steel combination vessel built in 1986 by Mid Coast Marine. New Yanmar main rated at 755 hp w/ completely rebuilt Twin Disc 5170 gear. John Deere 4045 65-kW and John Deere 4039 42-kW gensets. Packs 130k lbs salmon in main hold, plus bait freezer. 27 ton...
More Details- Year:
- 1994
- Length:
- 58
- Hull:
- Steel
- Builder:
- Van Peer Boat Works
- Location:
- Alaska
58’x23’x10’ steel combination seiner/pot/LL/trawler built by Van Peer in 1994. Extensive shipyard at Platypus in 2018. Yanmar 6AYM-FT main rated at 755 hp, new in 2018. Twin Disc MG5222 gear w/ 6:1 ratio. John Deere 99 kW and Kubota 28 kW gensets both new in 2018. P...
More Details- Year:
- 1990
- Length:
- 87
- Hull:
- Steel
- Builder:
- Mid Coast Marine
- Location:
- Alaska
87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...
More Details- Year:
- 2003
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- H&H Marine
- Location:
- California
32’x11.5’x4.5’ fiberglass lobster boat built by H&H Marine in 2003. Cummins 6BTA turbo diesel rated at 315hp w/ 2,800 hours. ZF reduction gear. 14kt cruise at 2200rpm and 11kt cruise at 2000 rpm. (2) 100gal live-wells below deck w/ (3) water and (2) air quick releas...
More Details4A – 7400# – Minimum bid $5.50/# - B-B. 4C – 5500# - Minimum bid $7.00/# - C-B. 4C – 5300# - Minimum bid $7.00/# - C-U. Accepting bids for 45 days. Auction ends on May 31, 2024. Call for information. ***QS/IFQ is being sold as-is, where-is, with all fa...
More Details- Year:
- 1983
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Alaska
47’x14’x8.5’ fiberglass combination vessel rigged for gillnet, crab, salmon, and longline. Delta laid hull finished by private party in 1983. Detroit 671 main rated at 200 hp, w/ only 750 hours on rebuild. Twin Disc 509 gear. 10kw Isuzu genset. Packs 15,000 lbs cr...
More Details- Year:
- 1966
- Length:
- 44
- Hull:
- Steel
- Location:
- Oregon
44.9’x14’x7.8’ steel combination vessel rigged for crab, salmon, tuna, black cod, and built in 1966. Detroit 671 main rated at 210 hp, rebuilt in 2021. Twin Disc 509 reduction gear. Isuzu 21kw genset. Fish hold insert packs 8,500 lbs crab. Blast freeze system w/ 10...
More Details- Year:
- 1968
- Length:
- 72
- Hull:
- Steel
- Builder:
- Berg
- Location:
- Washington
72’x21’x12’ steel longliner built in 1968 by Berg. Originally built as a crabber, has tendered. Caterpillar 3412 main engine rated at 510 hp. Twin Disc MG-5202 gear with 5.04:1 ratio. 145 kW Caterpillar C6.6 gen set and 80 kW John Deere 4045 w/ new Northern Lights g...
More Details- Year:
- 2000
- Length:
- 59
- Hull:
- Steel
- Builder:
- Alley Steel
- Location:
- Alaska
59.5’x24.5’ steel, shelter decked, schooner rigged for longline, pot, and tendering. Built in 2000 by Alley & Nichols. New in 2024, John Deere 6135 rated at 420 hp main. Rebuilt Twin Disk MG5114 reduction gear. Lugger 32 kW and Northern Lights 8 kW gensets. Chills 1...
More Details- Year:
- 1979
- Length:
- 53
- Hull:
- Fiberglass
- Builder:
- Delta Marine
- Location:
- Alaska
53’x15.6’x7’ Delta Marine combination vessel built in 1979, rigged for seine, longline, crab, and jig fisheries. Detriot 60 series main rated at 450 hp w/ Twin Disc gear. Isuzu 35kw genset. Fuel capacity of 2,200 gallons in (4) tanks. IMS 18-ton RSW system. Packs 4...
More Details- Year:
- 1990
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- All Points
- Location:
- Alaska
32’x16’ aluminum combination vessel Built by All Points in 1990. Currently rigged to longline and can be converted to gillnetter in Bristol Bay. John Deere 6125 AFM01 main rated 480 hp w/ ZF305A reduction gear. Lugger Northern Lights 8kW genset. PacWest 10 ton hydra...
More Details- Year:
- 1974
- Length:
- 68
- Hull:
- Steel
- Builder:
- Peterson Boat Building
- Location:
- Alaska
68’x21’x7’ steel combination longline/tender/pot boat built by Peterson Boat Building in 1974. John Deere 6125AFM75 rated at 400 hp, new in 2008. Twin Disc 516 gear new in 2008. (2) John Deere 6068 100kW gensets w/ updated exhaust. Packs 120k lbs salmon in (2) insula...
More Details- Year:
- 1980
- Length:
- 55
- Hull:
- Steel
- Builder:
- Van Peer
- Location:
- California
55’7”x17’x8’ steel combination vessel rigged for crab, longline, and troll. Built by Van Peer in 1980. Detroit 871 main rated at 250 hp w/ Twin Disc 509 gear. John Deere 30kw genset. Fish hold packs 50,000 lbs, and tankable for 25,000 lbs crab w/ bulkhead instert. B...
More Details- Year:
- 1967
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Skookum Boatworks
- Location:
- Washington
44’x14’x6’ fiberglass troller/longliner built by Skookum Boatworks in 1967. John Deere 6068 rated at 200 hp. Twin Disc 506 gear w/ 3:1 ratio. IMS hydraulic 7.5 ton refrigeration system can be used for spray brine or RSW. Insulated fish hold packs 8 tons. Kolst...
More Details- Year:
- 1977
- Length:
- 58
- Hull:
- Steel
- Location:
- Alaska
58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...
More Details- Year:
- 1977
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Barrie Farrell/Snoball
- Location:
- Alaska
40’x11’x5’ fiberglass gillnetter/troller/longliner built by Barrie Ferrell/Snoball in 1977. Caterpillar 3208 NT main engine rated at 210 hp. Twin Disc 502 gear. Packs 10,000 in ice in (6) fiberglass insulated slush tanks. Deck equipment includes KEM drum w/ levelwin...
More Details- Year:
- 1979
- Length:
- 58
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Washington
58’x19.5’x10’ Delta built in 1979, upgraded with big rolling chocks, bulbous bow, 50hp bow thruster, and rigged for seine, longline, and crab. Cummins K19A main w/ ZF gear. John Deere 60kw genset w/ 100 gal auxilliary hydraulics off Pitts clutch and Mitsubishi 20kw ge...
More Details- Year:
- 1964
- Length:
- 56
- Hull:
- Steel
- Builder:
- JM Martinac
- Location:
- Washington
56’x17’x8’ steel longliner/crabber built in 1964 by JM Martinac. John Deere 6125AFM75 main engine rated at 340 hp. Twin Disc MG516 gear with 4.5:1 ratio. 65 kW John Deere 4045TF genset. 2,800 gallons fuel capacity. Nshaft and bearings in 2022. Packs 65,000 salmon...
More Details- Year:
- 1979
- Length:
- 66
- Hull:
- Steel
- Builder:
- Howard Maki
- Location:
- Alaska
66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. Twin John Deere gen sets, 65 kW and 45 kW, recently installed. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 26-ton...
More Details- Year:
- 2018
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- LaConner
- Location:
- Alaska
39’x14’x5.5’ LaConner fiberglass sternpicker/crabber built in 2018. Volvo Penta D13 main engine rated at 600 hp. Twin Disc MGX5126A gear with 2.5:1 ratio. Makes 10 knots. 8” bow thruster. Packs 17k# salmon in (7) insulated holds. IMS 5 ton RSW system. Deck equipm...
More Details- Year:
- 1979
- Length:
- 40
- Hull:
- Fiberglass
- Builder:
- Formosa
- Location:
- California
40’x14’x3.5’ fiberglass troller also rigged for black cod, built in 1979 by Formosa Boat Building. 160 hp Perkins main w/ Twin Disc 373 gear. Lugger w/ 20 kw Northern Lights genset. Fish hold packs 8,000 lbs. Deck equipment includes set of 3-spool gurdies, longline...
More Details- Year:
- 1975
- Length:
- 45
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- Alaska
45’x13.5x9.5’ fiberglass Sunnfjord freezer-troller built in 1975, also rigged for longline and spot prawns. John Deere 6068 main rated at 225 hp w/ Twin Disc 506 gear. Isuzu 30kw genset. Fuel capacity of 1,250 gallons in (4) tanks. Fish hold packs 8,000 lbs frozen p...
More Details- Year:
- 1999
- Length:
- 85
- Hull:
- Steel
- Builder:
- Fred Wahl
- Location:
- Oregon
85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....
More Details- Year:
- 1964
- Length:
- 84
- Hull:
- Steel
- Builder:
- American Marine
- Location:
- Alaska
84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...
More Details- Year:
- 1987
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- C&M Marine
- Location:
- Alaska
44’x13’3”x8’8” fiberglass troller built by C&M in 1987. John Deere 6414 main rated at 150 hp w/ Twin Disc 506 gear, both rebuilt in 2019. Fuel capacity of 600 gallons in (2) tanks. Tanked and insulated fish hold packs 15,000 lbs iced, with (2) 2,000 lb slush tanks on...
More Details- Year:
- 1966
- Length:
- 58
- Hull:
- Steel
- Builder:
- Martinolich
- Location:
- Alaska
59’x17’x7’ steel crabber built by Martinolich in 1966. Caterpillar D343 main engine makes 400 hp, 1500 hours on rebuild. Twin Disc MG514 gear with 4.5:1 ratio. Makes 7 knots. (2) 20 kW Northern lights gen sets. 2,250 gallons fuel capacity in (3) tanks. Packs 50k#...
More Details