- Year:
- 1978
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Alaska
32’x12’x22” fiberglass hull, aluminum flush deck, RSW, BB gillnetter built by Modutech in 1978. Volvo TAMD 61A rated at 275 hp. Twin Disc MG 507 gear. 4.5 cube Eaton pump runs 7.5 ton IMS RSW system. Packs 10,000 lbs in (10) insulated fish holds. Kem Equipment narr...
More Details- Year:
- 1979
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Mel Martin
- Location:
- Alaska
32’x12’ fiberglass, RSW, Bristol Bay gillnetter built by Mel Martin in 1979. Rebuilt Lugger 6125 main rated at 460 hp. Twin Disc MG-5011 gear rebuilt in 2022. Makes 14.5 knots. Gen III 7.5 ton IMS RSW system chills 10k lbs in new insulated fish holds. Kinematic ste...
More Details- Year:
- 1977
- Length:
- 52
- Hull:
- Steel
- Builder:
- Leo H. Bohn
- Location:
- Oregon
52’x15’x7’ steel combination vessel rigged for crab, tuna, salmon, longline, and built by leo H. Bohn in 1977. Detroit 871 main rated at 325 hp w/ Twin Disc 509 gear. 65kw John Deere genset. Spray brine system w/ 15-ton compressor. Fish hold packs 50,000 lbs tuna, a...
More Details- Year:
- 1975
- Length:
- 78
- Hull:
- Steel
- Builder:
- Berg Shipyard
- Location:
- Alaska
78’x22.6’x11’ steel combination built by Berg in 1975. Rigged for tendering, longline and pots. GMC 12-V149 main rated at 725 hp. GMC 671 90 kW and Lugger 55 kW gensets. Packs 168,000 lbs cod in (2) insulated fish holds. 30 ton RSW system w/ new compressor, (2) cir...
More Details- Year:
- 1999
- Length:
- 40
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Washington
40’x14’x5’ custom aluminum troller/pleasure vessel, built by Rozema Boat Works in 1999. Cummins 6CTA 8.3 main rated at 450 hp, w/ 2,700 hours. Twin Disc w/ troll valve. Northern Lights/Lugger 5kw genset. Fuel capacity of 400 gallons in (2) tanks. (2) insulated fish...
More Details- Year:
- 1994
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Hoquiam
- Location:
- Alaska
32’x9.7’x5.5’ fiberglass charter/dive boat, built by Hoquiam in 1994. CAT 3116 main rated at 300 hp w/ 2,500 hours. ZF Hurth gear w/ troll valve. 2kw Honda generator. 5gpm Vickers hydraulic pump. Fuel capacity of 275 gallons in (3) tanks. Single fish hold packs 500...
More Details- Year:
- 1974
- Length:
- 58
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Alaska
58’x18.3’x9.3’ steel combination vessel rigged for pots, longline and tendering. Built by Marco in 1974. Cummins KT-19-M rated at 425 hp w/ Twin Disc 514 reduction gear. John Deere 4045 w/ 55kW and Sahabu w/ 22kW gensets. Packs 98k lbs in (2) insulated fish holds....
More Details- Year:
- 1990
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Alaska
32’x13.6’ Jumbo Rawson, flush deck, RSW, Bristol Bay gillnetter, built in 1990. Factory reman CAT 3208 rated at 350 hp w/ 1,500 hours. Twin Disc 507 gear. 520 gallon fuel capacity in (2) tanks. Packs 11,400 lbs in (8) fish holds. IMS 7.5-ton RSW system.&nb...
More Details- Year:
- 1967
- Length:
- 39
- Hull:
- Wood
- Location:
- California
39’3”x12’x4’ wood troller/crabber with permits, built in North Bend, OR in 1967. John Deere main rated at 175 hp w/ approx 3,300 hours. Twin Disc 5050SC gear. 440 gallon fuel capacity in (2) tanks. Briggs & Stratton gas generator. Fish hold packs 5,000 lbs. Includ...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Alaska
32’x13.6’ fiberglass, RSW, flush deck, Bristol Bay gillnetter built by Modutech in 1980. Cat 3208 w/ approx 4403 hrs. Packs 13,000 lbs in insulated fish holds with PacWest 7.5 ton RSW. Electronics include GPS, VHF, radar, and inverter. Stove, (4) berths and hot wate...
More Details- Year:
- 1982
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Mel Martin
- Location:
- Alaska
32’x12’x2’ fiberglass, RSW, flush deck, Bristol Bay gillnetter built by Mel Martin in 1982. Stored under cover in Naknek. John Deere 6068 main rated at 330 hp w/ 1,600 hours, new in 2017. ZF gear w/ 2:1 ratio. Fuel capacity of 260 gallons in (2) tanks. Packs 12,000...
More Details- Year:
- 1984
- Length:
- 115
- Hull:
- Steel
- Builder:
- Bender Shipbuilding
- Location:
- Rhode Island
115’x30’ steel trawler built by Bender Shipbuilding in 1984. Caterpillar D35167 main engine rated at 1700 hp. Reintjes WAF870 gear, 6.044:1 ratio. 78”, four-blade, stainless steel prop. 320 kW GMC 12V71, 320 kW GMC 8V92, and 99 kW John Deere gen sets. 15k gallons f...
More Details- Year:
- 1998
- Length:
- 38
- Hull:
- Aluminum
- Builder:
- Ed Wing
- Location:
- Oregon
38’x15’x3’ aluminum crabber/troller built by Ed Wing in 1998. Cummins 8.3 main rated at 330 hp w/ 2,000 hours. Twin Disc 507 gear. 600 gallon fuel capacity in (2) tanks. Fish hold packs 10,000 lbs crab. Deck equipment includes crab block, davit, dump box, longline...
More Details- Year:
- 1987
- Length:
- 25
- Hull:
- Fiberglass
- Builder:
- Ken Kraft
- Location:
- California
25’x8.5’x3’ fiberglass fishing vessel, built by Ken Kraft in 1987. Cummins 6bt main rated at 250 hp w/ 3,000 hours and ZF gear. 90 gallon fuel capacity in (2) tanks. Does 19 kts. Electronics include GPS, VHF, sounder, plotter, and autopilot. Asking $31,000.
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Alaska
32’x11.5’x28” fiberglass, flush deck, RSW, Bristol Bay gillnetter built by Modutech in 1980. Vessel was rebuilt from house aft and repowered in 2010. Cat 3208TA rated at 270 hp w/ Twin Disc gear, both installed in 2010. Bow thruster. IMS 5.5 ton RSW system w/ titaniu...
More Details- Year:
- 1981
- Length:
- 112
- Hull:
- Steel
- Builder:
- Eastern Shipyards
- Location:
- Massachusetts
112’x30’ steel trawler built by Eastern Shipyards in 1981. Twin Caterpillar 3412 main engines rated at 725 hp each. Twin Disc MG5222 gears, 5:1 ratio. 61”, four-blade, bronze props. (3) 190 kW Caterpillar 3306 gen sets. Hydraulics for haul back driven by additional...
More Details- Year:
- 2021
- Length:
- 35
- Hull:
- Aluminum
- Builder:
- North Cross Aluminum, Custom
- Location:
- Washington
35’x12’x3.5’ custom aluminum crabber, built in 2021. Cummins QSB 6.7 main rated at 480 hp w/ approx. 1,000 hours. ZF286A gear w/ 2.208:1 ratio. 400 gallon fuel capacity. 8” bow thruster. Does 24kts at 3000 rpm. Deck equipment includes 12” Hydroslave block, davit,...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Sea Venture
- Location:
- Alaska
32’x11.8’x3’ aluminum, flush deck, RSW, Bristol Bay gillnetter built by Sea Venture in 1978. Repowered in 2011 w/ Detroit 6V92TA rated at 300 hp and Twin Disc MG 509 reduction gear. Packs 12k lbs in Blue Seal and insulated fish holds. Sliding reel, Kinmatic drive and...
More Details- Year:
- 2022
- Length:
- 23
- Hull:
- Aluminum
- Builder:
- Wave Marine
- Location:
- Alaska
23’x9’ aluminum setnet skiff and custom aluminum trailer built by West Marine in 2022, brand new. Built for all weather conditions. 90 hp Yamaha 4-stroke outboard. Proven design provides 4k# capacity in (5) or (6) brailers or totes on bow, capacity for an additi...
More Details- Year:
- 1987
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- KG Marine
- Location:
- Alaska
32’x13.4’x3’ aluminum, RSW, Bristol Bay gillnetter built by KG Marine in 1987. Original owner. Lugger rated at 460 hp w/ Twin Disc 509 gear. Updated IMS 8.5 ton RSW system. Packs 15,000 lbs in (6) holds. 10" bow thruster. Sliding aluminum re...
More Details- Year:
- 1976
- Length:
- 43
- Hull:
- Fiberglass
- Builder:
- Delta Marine
- Location:
- Alaska
43’x14’x6’ fiberglass pleasure/troller built by Delta Marine in 1976. Twin Cat 3208 NA, each rated at 210 hp w/ Twin Disc MG 506G. Easthope gurdies, updated aluminum hayrack, trolling poles, and rigging. Packs apprx 4k lbs combined in (2) deck totes and (1) tote belo...
More Details- Year:
- 1978
- Length:
- 150
- Hull:
- Steel
- Builder:
- Halter Marine Services, Inc.
- Location:
- Alaska
150’x38’x16’ steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds, extensiv...
More Details- Year:
- 1974
- Length:
- 52
- Hull:
- Fiberglass
- Builder:
- Little Hoquiam
- Location:
- Alaska
52’x16’ fiberglass seiner built in 1974 by Little Hoquiam. Brand new John Deere AFM856090 main engine makes 325 hp. Factory rebuilt Twin Disc C110HP3 reduction gear. 30 kW Isuzu 4801 gen set. 700 gallons fuel capacity in (2) tanks. Packs 42k# in (1) fish hold with n...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Alumaform Inc.
- Location:
- Alaska
32’x11.3’x36” aluminum, RSW, Bristol Bay, flush deck, gillnetter built by Alumaform in 1978. Iveco 806SRM rated at 300 hp w/ Newage gear. IMS 7.5 ton RSW w/ updated motor and dedicated hydraulic system. Barrier coated fish holds pack 12k lbs. Narrow reel w/ Rexroth...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Wegley
- Location:
- Alaska
32’x11’ flush deck, RSW Bristol Bay gillnetter built by Wegley in 1978. Re-powered, new main and gear in 2020. Cummins 6BT main engine rated at 210 hp. Twin Disc 5061SC gear, 24” prop. Shallow w/ 7” bow thruster. Pac West 7.5 ton RSW system, new compressor. Packs...
More Details- Year:
- 1980
- Length:
- 32
- Hull:
- Fiberglass
- Builder:
- Midland Marine
- Location:
- Alaska
32’x12’x3.5’ fiberglass, RSW, flush deck Bristol Bay boat built by Midland in 1980. Volvo Penta 63 main engine rated at 315 hp. 4,000 hours since rebuild. ZF RRM301 gear with 2:1 ratio. Makes 10 knots. Kubota 4.5 kW diesel genset. 8 t...
More Details- Length:
- 35
- Hull:
- Fiberglass
- Location:
- California
35’x14’ fiberglass troller located in Morro Bay, CA. INCLUDES CA AND OR SALMON TROLL PERMITS. Cummins 855 main engine rated at 500 hp. Twin Disc 509 gear with 2:1 ratio. Pack 4k# in (1) insulated fish hold. Spray brine system. Includes salmon gurdies, trolling gea...
More Details- Year:
- 1966
- Length:
- 50
- Hull:
- Steel
- Builder:
- James Murphy
- Location:
- California
50’x14.5’x8’ steel troller/crabber built in 1966 by James Murphy. Detroit 671 main engine. Capitol gear with 3:1 ratio. 2500 gallons fuel capacity. Makes 7 knots. Nissan 27 kW and Hydropower 5 kW gensets. Packs 24,000# salmon, crab insert holds 7k#. Copeland blast fre...
More Details- Year:
- 1984
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Hydraulic Fishing Supply
- Location:
- Alaska
32’x14.5’ Bristol Bay sternpicker with top house, flush deck, RSW and bow thruster. Built in 1984 by Hydraulic Fishing Supply. New in 2015 Cat C-7 main rated at 450 hp. Twin Disc 507 gear. New 2” shaft and propellor. Pacific West 7.5 ton RSW system, w/ new compress...
More Details- Year:
- 1978
- Length:
- 48
- Hull:
- Steel
- Builder:
- Troyer St. Clair
- Location:
- Alaska
48’x14’x7.7’ steel crabber, Troyer design, built by St. Clair in 1978. Isuzu UM6Hk1 rated at 350 hp w/ Twin Disc 509 gear. Isuzu 20kW genset. (2) insulated fish holds pack approx. 40k lbs salmon. Recent work includes blasted/painted hull, lazarette, boom and new wat...
More Details