Vessels - Crabbers

53’x15.6’x7’ Delta Marine combination vessel built in 1979, rigged for seine, longline, crab, and jig fisheries. Detriot 60 series main rated at 450 hp w/ Twin Disc gear. Isuzu 35kw genset. Fuel capacity of 2,200 gallons in (4) tanks. IMS 18-ton RSW system. Packs 4...

107’x30’x11’ steel aft-house crabber built in 1979 by Bender. Twin Caterpillar D3412 main engines rated at 624 hp each. Twin Disc MG-520 gears. Twin 225 kW Caterpillar 3406B gensets. 33k gallons fuel capacity. Packs 120k# king crab, 165k# opilio, 330k# sockeye. (2)...

58’x19.5’ fiberglass combination/seiner built By Delta in 1981. Caterpillar 3408 main engine rated at 365 hp. Twin Disc MG54C gear with 4.5:1 ratio. 40 kW John Deere and 25 kW Isuzu gen sets. New exhaust on main in 2019.  4900 gallons fuel capacity. Packs...

28’x10.5’x1.5’ aluminum crabber built by Western Fab in 2006. Twin Honda BF225A outboards make 225 hp each, new in 2021. (2) 100 gallon fuel tanks. Makes 34 knots light. Packs 1,500# crab in (1) hold, 2k# on deck in totes. Configured for crab with davit, hauler, dum...

68’x21’x7’ steel combination longline/tender/pot boat built by Peterson Boat Building in 1974. John Deere 6125AFM75 rated at 400 hp, new in 2008. Twin Disc 516 gear new in 2008. (2) John Deere 6068 100kW gensets w/ updated exhaust. Packs 120k lbs salmon in (2) insula...

114’x30’x11’ steel, single-crew crabber/tender built at Fairhaven Shipyard in 1973. Caterpillar 3512DI main engine rated at 1207 hp. Caterpillar 7261 gear with 3.84:1 ratio. Cruises at 10 knots. 180 kW Caterpillar 3306 and 190 kW Caterpillar 3306 gen sets. 40,000 g...

36’x12’x4.5’ fiberglass crabber/troller built in 1985. Cummins 6BTA 5.9 main rated at 315 hp. ZF Hurth gear. 150 gallon fuel capacity. Portable Honda 2kw generator. Deck equipment includes Junes crab block, davit, and outriggers. Single fish hold with raised hatch...

58’x18’ steel combination vessel built as a seiner in 1975 by Marco. John Deere 6135AFM main engine rated at 425 hp, new 2013. Twin Disc 514 marine gear with 4.5:1 ratio, rebuilt 2013. Makes 7.5 knots. 3000 gallons fuel capacity in (2) tanks. 50 kW Isuzu 4B61T genset. P...

58’x22’x8’ steel combination vessel built in 1977 in Moss Landing, CA. Caterpillar 3406B main engine rated at 385 hp. Twin Disc MG514 gear with 4:1 ratio. 60 kW Iveko and 28 kW Kubota gensets. Packs 80k# in (1) insulated fish hold. IMS 18-ton RSW system. Accommod...

126’x30’x12’ steel house-aft crabber/tender vessel built in 1949 by FB Walker and Sons, Inc. Twin Caterpillar 3408 DI main engines rated at 365 hp each. Twin Disc MG514 gears with 6:1 ratio. Twin 180 kW Caterpillar 3306 TA and (1) 40 kW John Deer 4045DFM70 gensets. P...

100’x25’x12’ steel, tender/crabber built by Toche Enterprises Inc in 1973. Converted to a Bering Sea crabber and lengthened 10’ in 1975. Detroit 16V71 rated at 480 hp w/ Capitol HPC10500 gear w/ 6:1 ratio. (2) Detroit 671 135 kW and Yanmar 45 kW. Packs 210k lbs salm...

65’x21’x8.5’ steel Gulf shrimper built in 1980 by Irving Steel Fab. Rebuilt CAT 3408 rated at 400 hp w/ Twin Disc 514C gear. Kabota V2203 20kW genset. Rigged for crab, shrimp and ground fish. Recent work completed at Giddings Boat Works includes rebuilt main, new ou...

42’x13.9’x6’ fiberglass Delta built in 1974, rigged for spot prawns, salmon, and as a squid light boat. Volvo D-12 main rated at 450 hp. Twin Disc gear w/ 2:1 ratio. Kubota 18kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Fish hold packs 14 tons. Deck equi...

34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...

56’x16’x7’ steel purse seiner, Monk design, built in 1982. Detroit 871 rated at 350 hp w/ 4850 hrs on the rebuild. Perkins auxiliary runs hydraulic RSW system. Packs 75k lbs in (2) insulated fish holds. RSW w/ 18 ton compressor. Marco power block w/ gripper, deck w...

66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. Twin John Deere gen sets, 65 kW and 45 kW, recently installed. (2) 35/25 gpm Vickers hydro pumps. Cool Sea 26-ton...

39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furono radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes crab block, davit, dum...

104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...

85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....

42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...

29.4’x12.3’ fiberglass crabber built by Modutech in 1979. Cat 3208 rated at 300 hp. Mitsubishi 19 kW auxillary. Single hold packs 4000 lbs crab. Includes crab block and hydraulic davit. Electronics include multi system display w/ GPS, plotter, radar and sounder. I...

84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...

44’x13’3”x8’8” fiberglass troller built by C&M in 1987. John Deere 6414 main rated at 150 hp w/ Twin Disc 506 gear, both rebuilt in 2019. Fuel capacity of 600 gallons in (2) tanks. Tanked and insulated fish hold packs 15,000 lbs iced, with (2) 2,000 lb slush tanks on...

59’x17’x7’ steel crabber built by Martinolich in 1966. Caterpillar D343 main engine makes 400 hp, 1500 hours on rebuild. Twin Disc MG514 gear with 4.5:1 ratio. Makes 7 knots. (2) 20 kW Northern lights gen sets. 2,250 gallons fuel capacity in (3) tanks. Packs 50k#...

53’x15’x3.5’ fiberglass Beck/LeClerq combination vessel, built in 1986. Currently rigged as a crabber. Lugger 6125 main engine rated at 410 hp. Makes 7.5 knots at 9 gph. Twin Disc 509TD gear with 2:1 ratio. 30 kW Isuzu gen set. Packs 20k# crab,40# of salmon in (1)...

38’x13’x4.2’ fiberglass 1974 Ledford seiner rigged for crab, gillnet, and seine. John Deere 6068T main rated at hp w/ Twin Disc 506 gear. 450 gallon fuel capacity in (2) tanks. Packs 7,000 lbs crab in tanked middle hold, plus two un-tanked holds outside. Deck equip...

54.9’x17’x10.5’ fiberglass Little Hoquiam built in 1990, rigged for crab and seine. Cummins 855NA main rated at 425 hp, w/ Tonanco TN-7295 gear. John Deere 4045 65kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Packs 41,000 lbs of crab, or 80,000 lbs of salm...

36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...

42’x12’x7’ wood troller/crabber with permits, built by Remmen in 1965. Detroit v6-71 main rated at 165hp w/ Capital gear. Fuel capacity of 800 gallon in (4) tanks. Fiberglassed fish hold packs 8 tons iced tuna, and 8k lbs crab in insert. Deck equipment includes 19” J...

42’x14.5’x4’ fiberglass gillnetter built by Polar Boat Works, AK in 1990. John Deere 6081AFM75 rated at 375 hp w/ Twin Disc 5111. Lugger Northernlights 5.5 kW genset. Makes 10 knots at 9.5 gph fuel consumption. Packs 30,000 in (3) insulated fish holds. Aluminum art...