BB24-016

$7,000
Year:
1970
Length:
32
Hull:
Aluminum
Builder:
Matsumoto
Location:
Alaska

BB24-016

32’ aluminum Bristol Bay gillnetter built by Matsumoto in 1970 and rebuilt in 1983. Crusaider 454 gas engine w/ approx 350 hp. Aluminum reel, levelwind and anchor winch. Packs 12,000 lbs in (7) aluminum fish holds. (3) steering stations. Includes contents of locker...

More Details

TN24-001

$1,100,000
Year:
1991
Length:
88
Hull:
Steel
Builder:
D&T Marine
Location:
Hawaii

TN24-001

88’x22.5’ steel tuna vessel built by D&T Marine in 1991. Cummins KTA1150 main engine rated at 500 hp. Twin Disc MGX516 with 6:1 ratio. 8.5 knot cruise. Twin 60 kW Cummins 6BT gen sets, (1) 30 kW Cummins 4B gen set. 14k gallons fuel capacity in (10) tanks. (4) fish...

More Details

CR24-020

$3,200,000
Year:
1967
Length:
92
Hull:
Steel
Builder:
Pac Fish
Location:
Washington

CR24-020

92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 20 kW Isuzu hotel gen set. Packs 275k# reds, 130k# crab in (2) fish holds. 80...

More Details

SP24-009

$82,000
Year:
1974
Length:
38
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SP24-009

38’x13’ fiberglass gillnet/crab/shrimp vessel built in 1974 by Delta. Volvo TAMD61A main engine rated at 301 hp. Twin Disc MG-509 gear with 2:1 ratio. Burns 5 gph at 7.5 knots. 10 kW Isuzu LB31 gen set. Packs 15k# in (4) insulated fish holds. Deck equipment includ...

More Details

SE24-011

$315,000
Year:
1976
Length:
42
Hull:
Fiberglass
Builder:
Delta
Location:
Alaska

SE24-011

42’x13’ fiberglass seiner/crabber built by Delta in 1976, overhauled in 2013-14. John Deere 6090 main engine rated at 330 hp. Twin Disc gear with 2.5:1 ratio. Burns 3.5 gph at 7 knots. 18 kW Mitsubishi gen set. Packs 28k# salmon. IMS 12.5 ton RSW system. Vickers...

More Details

CR24-019

$180,000
Year:
1976
Length:
38
Hull:
Fiberglass
Builder:
Delta
Location:
California

CR24-019

38’x13.5’x5.4’ fiberglass Delta crabber/troller built in 1976. John Deere 6068 rated at 240 hp w/ Twin Disc 506 gear. Fuel capacity of 740 gallons in (4) tanks. Single tanked fish hold and two tank inserts - crab insert packs 6,100 lbs and insulated salmon insert pac...

More Details

CR24-018

$150,000
Year:
1976
Length:
37
Hull:
Aluminum
Builder:
Freeman Marine
Location:
Oregon

CR24-018

37.6’x13.5’x5.5’ aluminum vessel built by Freeman Marine in 1976, rigged for crab, troll, and tuna. John Deere 6068 main rated at 260 hp w/ Twin Disc gear. Isuzu 21kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Packs 8,600 lbs in (2) fish holds below deck,...

More Details

SP24-008

$75,000
Year:
1970
Length:
36
Hull:
Fiberglass
Builder:
Roberts
Location:
Washington

SP24-008

36’x12.5’x3.5’ fiberglass gillnetter built by Roberts in 1970. CAT 3126b main rated at 450. ZF reduction gear, new in 2019. Fuel capacity of 400 gallons in (2) tanks. Packs 10,000 lbs in (5) tanked and insulated fish holds. Deck equipment includes gillnet reel, lev...

More Details

BB24-015

$220,000
Year:
1980
Length:
32
Hull:
Aluminum
Builder:
Marco
Location:
Alaska

BB24-015

32’x11.5’x2.5’ aluminum, RSW, flush deck, Bristol Bay gillnetter built by Marco in 1980. 2015 Yanmar 6LY rated at 440 hp w/ ZF360 gear. Makes 14 knots. Bow thruster. IMS 7.5 ton RSW system. Packs 11k lbs in double walled fish holds w/ insulation. Maritime Fab. re...

More Details

CR24-016

$25,000
Year:
1985
Length:
32
Hull:
Fiberglass
Builder:
Radon
Location:
California

CR24-016

32’x10’x3.6’ fiberglass Radon built in 1985, rigged for crab and salmon. Twin GM 383 gas engines rated at 250hp each. Does 20kts. Fuel capacity of 250 gallons in one tank. Fish hold packs 1,600 lbs crab. Deck equipment includes crab block, davit, boom w/ winch, sal...

More Details

TR24-013

$185,000
Year:
1979
Length:
42
Hull:
Fiberglass
Builder:
SeaMaster
Location:
Alaska

TR24-013

42’x12.5’ fiberglass troller built in 1979 by SeaMaster. GMC 471 main engine rated at 120 hp. Twin Disc gear with 3.83:1 ratio. Makes 7.5 knots, 1k gallons fuel capacity. Eaton 421 hydraulics. Packs 9500# frozen coho (1) fish hold, plate freezer system. Includes E...

More Details

CO24-004

$780,000
Year:
1995
Length:
58
Hull:
Steel
Builder:
Studeman
Location:
Oregon

CO24-004

58’x20’x9.5’ steel combination vessel built in Reedsport, OR by Scott Studeman in 1995. John Deere 6135 main rated at 425hp w/ Twin Disc 5114 gear. (2) John Deere 4045 65kw gensets. Fish hold w/ removable partitions packs 33,000 lbs crab w/ aft section as bait freeze...

More Details

BB24-014

$155,000
Year:
1989
Length:
32
Hull:
Fiberglass
Builder:
Wegley
Location:
Alaska

BB24-014

32’x13’ fiberglass Jumbo Wegley buiit in 1989. Cummins QSC main engine rated at 550 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Makes 12 knots. Packs 15k# in (12) insulated holds. IMS 7.5 ton RSW system. Deck equipment incudes Maritime Fab reel and Ki...

More Details

SE24-010

$2,100,000
Year:
1992
Length:
58
Hull:
Steel
Builder:
Bill Berggren
Location:
California

SE24-010

58’x21’x10.5’ steel seiner package w/ skiff and permits, built in 1992 by Bill Berggren. Cummins KTA-19 main rated at 500 hp w/ Twin Disc reduction gear. Northern Lights 60kw and Northern Lights 30kw gensets. 20-ton RSW system w/ titanium chillers. Pakcs 116,000 lbs...

More Details

CR24-015

$340,000
Year:
2018
Length:
33
Hull:
Aluminum
Builder:
ACI
Location:
Washington

CR24-015

33’x11’x2’ aluminum crabber built by ACI in 2018. Twin Honda 250hp outboards. Cruises at 22kts and does 40kts WOT. Fuel capacity of 200 gallons in (2) tanks. 13hp power pack w/ 30 gallon hydraulic tank. 15” Junes crab block, hydraulic davit, and dump box. Fish hold...

More Details

SP24-007

$165,000
Year:
1978
Length:
32
Hull:
Fiberglass
Builder:
Roberts
Location:
Alaska

SP24-007

32’x11.5’ fiberglass sternpicker built in 1978 by Roberts. Volvo TAMC70D main engine rated at 260 hp, low hours on rebuild. Twin Disc gear with 2:1 ratio. Packs 9k# in (6) insulated fish holds. Deck equipment includes Maritime Fab drum, levelwind, rower roller, and...

More Details

CO24-003

$2,500,000
Year:
1990
Length:
87
Hull:
Steel
Builder:
Mid Coast Marine
Location:
Alaska

CO24-003

87’x23’x11’ Corten steel combination tender/pot/longliner built by Mid-Coast Marine in 1990 and stretched by Fred Wahl in 2001. Extensive shipyard completed fall 2022 and 2020. CAT 3412 main rated at 540 hp rebuilt in 2022. Twin Disc 518 reduction gear. MER/Isuzu 75...

More Details

PR24-002

$2,500,000
Year:
1978
Length:
167
Hull:
Steel
Builder:
Maxon Marine Industries, Inc.
Location:
Washington

PR24-002

167’x46’x16’ combination catcher/processor vessel built in 1978 by Maxon Industries. Twin Caterpillar 3508 main engines rated at 850 hp each, in-framed 2023. Caterpillar 7261 marine gears with 5.11:1 ratio. (2) 190 kW Caterpillar 3306 and 55 kW Caterpillar gen sets....

More Details

CR24-013

$175,000
Year:
2003
Length:
32
Hull:
Fiberglass
Builder:
H&H Marine
Location:
California

CR24-013

32’x11.5’x4.5’ fiberglass lobster boat built by H&H Marine in 2003. Cummins 6BTA turbo diesel rated at 315hp w/ 2,800 hours. ZF reduction gear. 14kt cruise at 2200rpm and 11kt cruise at 2000 rpm. (2) 100gal live-wells below deck w/ (3) water and (2) air quick releas...

More Details

SE24-009

$35,000
Year:
1929
Length:
52
Hull:
Wood
Location:
Alaska

SE24-009

52.7’x15’x7’ wood seiner built in 1929. Detroit 8V71 main w/ Twin Disc 509 reduction gear. Kubota 28kw genset. Fuel capacity of 450 gallons in (2) tanks. IMS 18-ton RSW system. Fish hold packs 40,000 lbs. Deck equipment includes Kolstrand deck winch, Vitek power b...

More Details

TR24-010

$56,000
Year:
1973
Length:
35
Hull:
Fiberglass
Builder:
Pettis
Location:
Oregon

TR24-010

35.2’x12’x6.4’ fiberglass troller built by Pettis in 1973. Cummins 555 main rated at 255 hp. Fuel capacity of 150 gallons in (2) tanks. Insulated fish hold packs 12,000 lbs in (6) bays. Deck equipment includes 3-spool gurdies, tuna pullers, crab block and hydraulic d...

More Details

CR24-012

$70,000
Year:
1997
Length:
31
Hull:
Fiberglass
Builder:
Mel Martin
Location:
California

CR24-012

31’x12’x2’ fiberglass Mel Martin crabber built in 1997. Volvo Penta Kad 44 main rated at 260 hp w/ 1100 hours. Outdrive. Does 15 kts. Packs 6,000 lbs in (3) tanked fish holds. Electronics include (2) Garmin 182c GPS/plotters and (2) VHF radios. Also includes 2014...

More Details

CH24-004

$495,000
Year:
2008
Length:
72
Hull:
Steel
Builder:
Schrier Boats
Location:
Alaska

CH24-004

72’x18’ steel hull, aluminum house, research/pleasure vessel built by Schrier Boats in 1999 and finished by owner in 2008. Sleeps (10) guests and (4) crew. (2) heads w/ showers. Lugger L1276A rated at 340 hp w/ updated Twin Disc CPG12 reduction gear and Hundested var...

More Details

SE24-008

$325,000
Year:
1958
Length:
58
Hull:
Steel
Location:
Washington

SE24-008

58’x18.5’ steel seiner built in 1958. Cummins 855 main engine. Twin Disc MG514 gear with 3:1 ratio. 8.5 knot cruise. PTO w/ Pitts clutch. 40 kW Isuzu 4BD1 gen set. Packs 70k# in (2) fish holds. 20 ton RSW system. Kolstrand deck winch, Marco power block, (2) booms...

More Details

SP24-006

$135,000
Year:
1987
Length:
34
Hull:
Aluminum
Builder:
American Welding
Location:
Alaska

SP24-006

34’x12’ aluminum combination vessel built in 1987 by American Welding. Set up for gillnet, crab, longline, and dive fisheries. Isuzu A6BGITQW main engine rated at 180 hp. (3) fish holds, slush ice. Deck equipment includes crab block. longline hauler, gillnet drum, a...

More Details

CO18-029

$1,500,000
Year:
1980
Length:
72
Hull:
Steel
Builder:
Duke's Welding
Location:
Oregon

CO18-029

72’x22’x10’ steel combination vessel. Monk-design, built by Duke’s Welding in 1980. Currently set up as a crabber/shrimper/tuna. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW...

More Details

LC24-001

$2,200,000
Year:
1978
Length:
134
Hull:
Steel
Builder:
Lantana Boatyard
Location:
Alaska

LC24-001

134’x32’ steel landing craft built by Lantana Boatyard Inc in 1978. Current COI for freight, oil response and oceanographic research. Cruises at 10 knots. Draws 4’ light and 7’ loaded. 14.5’ wide ramp w/ 72’x31’ cargo deck. Twin Cat C-18 each rated at 600 hp w/ Twin...

More Details

TE24-003

$375,000
Year:
1928
Length:
84
Hull:
Wood
Builder:
Johnson Brothers
Location:
Washington

TE24-003

84’x20’x12’ wood gillnet tender / charter vessel, built by Johnson Brothers for the US Bureau of Fisheries in 1928. Completely rigged for tendering but also set up for chartering with (3) passenger staterooms, plus crew quarters, (2) heads w/ showers, large comfortable...

More Details

CR24-011

$435,000
Year:
2022
Length:
36
Hull:
Aluminum
Builder:
Velocity Marine
Location:
Washington

CR24-011

36’X13’ Aluminum crabber built by Velocity Marine in 2022, like new. Twin Suzuki 350 Dual prop outboards rated at 350 hp each. 850 hrs. 18 knot cruise, 35 knots top speed. MER 22Kw gen set Model MGM-KNI three-phase gen set with front mounted with Pitts clutch. 300 ga...

More Details

TR24-008

$60,000
Year:
1977
Length:
36
Hull:
Fiberglass
Builder:
Deltage
Location:
Alaska

TR24-008

36’x11.6’x4.4’ fiberglass troller built in 1977 by Deltage Boats LTD, British Columbia. CAT 3106 main rated at 210 hp w/ Twin Disc 506 gear. Fuel capacity of 450 gallons in (4) tanks. (2) insulated fish holds pack 9,500 lbs. Deck equipment includes aluminum A-frame...

More Details

Sign up for email updates