Vessels - Crabbers

38’x15’x3’ aluminum crabber/troller built by Ed Wing in 1998. Cummins 8.3 main rated at 330 hp w/ 2,000 hours. Twin Disc 507 gear. 600 gallon fuel capacity in (2) tanks. Fish hold packs 10,000 lbs crab. Deck equipment includes crab block, davit, dump box, longline...

35’x12’x3.5’ custom aluminum crabber, built in 2021. Cummins QSB 6.7 main rated at 480 hp w/ approx. 1,000 hours. ZF286A gear w/ 2.208:1 ratio. 400 gallon fuel capacity. 8” bow thruster. Does 24kts at 3000 rpm. Deck equipment includes 12” Hydroslave block, davit,...

150’x38’x16’ steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds, extensiv...

50’x14.5’x8’ steel troller/crabber built in 1966 by James Murphy. Detroit 671 main engine. Capitol gear with 3:1 ratio. 2500 gallons fuel capacity. Makes 7 knots. Nissan 27 kW and Hydropower 5 kW gensets. Packs 24,000# salmon, crab insert holds 7k#. Copeland blast fre...

48’x14’x7.7’ steel crabber, Troyer design, built by St. Clair in 1978. Isuzu UM6Hk1 rated at 350 hp w/ Twin Disc 509 gear. Isuzu 20kW genset. (2) insulated fish holds pack approx. 40k lbs salmon. Recent work includes blasted/painted hull, lazarette, boom and new wat...

33.5’x12’ aluminum bowpicker/longliner built in 1988 by J&H Boatworks. Twin Volvo D6330A main engines rated at 330 hp each. Cruises at 25 knots. 200 gallons fuel capacity in (2) tanks. Packs 18k#. Full galley and marine head. Deck equipment includes drum and power...

36’x11’x5’ aluminum Shore built in 1968, INCLUDING CA 400 pot crab permit good to 69’10” mloa. Crusader 454 main rated at 350 hp, w/ less than 500 hours. Insulated fish hold packs 16,000 lbs. Deck equipment includes net reel and power roller. Electronics include GPS...

65’x20’x6’ steel, combination tender/crabber built in 1988 in San Leon, TX. Detroit 12V71 rated at 580 hp. Detroit 4DT w/ 60 kW and Cummins 4BT w/ 25 kW auxiliaries. 40 ton RSW system. Insulated fish hold packs approx. 100k lbs salmon. 19’ steel picking boom and 36...

30’x10’x2’ fiberglass Wilson dive boat built in 1980, rigged for crab. 315 hp Cummins 6BT main w/ only 250 hrs, installed Jan 2020. Bravo II outdrive. Fuel capacity of 150 gallons in (2) tanks. Packs approximately 2,000 lbs in (2) glassed fish holds, with room for to...

45’x16’x5’ fiberglass, combination crabber/gillnetter built in 2021. Millennium Marine 45 hull. John Deere 6135 SFM85 rated at 750 hp w/ Twin Disc 5126. 18 kts WOT and 10 kts cruise. Aluminum roof, free standing mast, and 16’ boom. Getec 7.5 kW hydraulic generator....

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Rebuilt Cummins 6BTA rated at 315 hp w/ 2k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold. Hydraulic davit, 15” Junes block and bins for crab tank. Vickers 24 GPM hydraulic...

36’x11’x3’ aluminum crabber built by Matsumoto in 1965. Recently upgraded Cummins 6BTA rated at 315 hp w/ 1k hrs and Twin Disc 50/50 gear. Mitsubishi 8 kW genset. Packs 4k lbs crab in (1) hold w/ insert. Hydraulic davit, 17” Junes block and dump box. Vickers 24...

38.5’x13’x5’ fiberglass Hoquiam crabber/troller built in 1970. Detroit 653 main rated at 150 hp w/ Twin Disc gear. 3kw Honda genset. Fuel capacity of 500 gallons in (2) tanks. Packs 12,000 lbs frozen tuna. Blast freeze system w/ Carrier 5f-30 compressor.  Rece...

27’x10’x2’ fiberglass Boston Whaler built in 1988, rigged for nearshore fishing and longline. Twin Honda BF250 hp outboards w/ only 900 hours. Cruises at 22 kts, and 30+ kts WOT. 300 gallon fuel capacity in (3) tanks. Honda powerpack runs Warren Junes 15” hauler, Hy...

48’x16’x8.8’ steel crabber/longliner built by Troyer in 1980. Cummins 855 main engine rated at 275 hp. Twin Disc 509 gear with 3:1 ratio. Makes 7 knots, 1200 gallons fuel capacity in (2) tanks. 40 kW John Deere 4045 genset. Packs 46k# cod in (1) fish hold. 20 ton...

32’x11’x3.5’ fiberglass over wood troller built in 1982 by Gary Morris. GMC 353T main engine rated at 175 hp. Burns 2.5 GPH.makes 7 knots. 150 gallons fuel capacity in (2) tanks. 3650 watt gas generator. Packs 1200# tank in, 3k# dry. Deck equipment includes Junes...

54’x16.2’x6’ fiberglass over wood combination vessel, rigged for crab, troll, and live bait seining. Built by Seaway in 1977. Detroit 871 main rated at 318 hp w/ 2,200 hrs on rebuild. Twin Disc 509 gear. 35kw Isuzu genset, new in 2018. Packs 20,000# in (4) tanked/i...

28.6’x9’x3’ fiberglass cruiser rigged for crab and trolling, built by C&M Manufacturing in 1970. Cummins 6BTA main rated at 210 hp w/ 1,700 hrs. Fuel capacity of 180 gallons in (2) tanks. Aluminum mast and trolling poles, (2) double hydraulic gurdies, crab block, and...

93’x31’ steel combination vessel built in 1974 by Marine Power and Equipment. Lengthened and sponsoned at Duwamish Shipyard in 1991, new wheelhouse by Snow and Co. in 2019. GMC main rated at 940 hp. Twin Disc gear with 6:1 ratio. 232 kW Detroit 50 Series and 125 kW...

37’x10’ fiberglass sternpicker built by Ferrell in 1976. Cummins 6BT main engine rated at 330 hp, low hours. Twin Disc gear with 2:1 gear. Makes 15 knots WOT. Yamaha 2000 suitcase generator included. Packs 10k# in (3) fish holds. Equipment includes drum, boom, and...

32’x14’x3’ aluminum crabber/longliner combination vessel built by La Conner in 1984. Twin Cummins 6BTA main engines rated at 315 hp each. ZF 2-20 AS gears. Yamaha EF2600 110v portable generator. Deck equipment includes Maritime Fab roller, longline reel with level...

63’x17.7’x8’ steel combination vessel, rigged for bottom trawling, built by Mike Brown in Port Hueneme, CA. Isuzu UM6WG main rated at 505 hp and Twin Disc 514 gear. PTO drives (2) 60 gpm pumps. John Deere 40 kW genset w/ Vickers 20 gpm pump. Packs 70,000# iced groun...

40'x10'x7' double-skinned wood troller/crabber built by Hansen in 1952. GMC 371 main engine rated at 140 hp. Twin Disc 509 marine gear. Packs 3,000# crab in tank, 5,000# deckloaded. Chilled water salmon tank holds 3,000#. Deck equipment includes a 17" Warren Junes...

25'x8' fiberglass, built in 1982 by Farallon. 325 hp Mercruiser gas, only 2 hrs on engine. 12 gpm hydraulics, electric clutch. 500# fish hold. Crab block, davit, and salmon tree w/ poles. Electronics include GPS, plotter, autopilot, sounder, and (2) VHF. Asking $7...

50'x15'x8.5' steel combination vessel, rigged for crab and tuna. Monk design, built by W. Robertson in 1979. Cummins main rated at 325 hp. Kubota 30 kW auxiliary. 1,800 gallon fuel capacity in (4) tanks. 10 ton Spray Brine system w/ 5F30 Carrier compressor. Capac...

70'x21'x9.5' steel dragger, currently used for research work. Built in 1978 by Nichols Bros. 425 hp Cat 353 main w/ appr. 14K hrs on overhaul. Burns 9 gph @ 8 kts. Twin Disc 4.5:1 gear. Yanmar 36 kW and Kubota 28 kW gen sets. Marco hauler and coiler, Yaquina YB5 t...

58’x16.5’x7’ steel seiner/pot boat, built in 1949 by Long Marine. Needs new main engine. Isuzu 30 kw gen set.  Electronics include Furuno radar, (2) VHF, (2) GPS, Furuno sounder, ComNav autopilot, computer w/ NobelTec. Packs appr. 80,000#. New galley appliances...

160'x36' ex-supply vessel, built in 1967 by Zigler, converted to crab in 1990. Vessel has undergone major steel work, needs completion of refitting. Twin Cat 398 mains rated at 950 hp, partial rebuilds need completion. (2) 500 kw Detroit 16V92 gen sets, (1) 75 kw 4-7...