- Year:
- 1980
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Hansen Boat Company
- Location:
- Alaska
44’x13’9”x5’ fiberglass seiner built by Hansen Boat in 1980. John Deere 6081 new in 2011 w/ Twin Disc 509. MER Isuzu auxiliary. Updated IMS 20 ton RSW system. Packs approx 25k lbs of chilled product. Kinematic seine block, Kolstrand deck winch, (2) picking booms an...
More Details- Year:
- 1978
- Length:
- 70
- Hull:
- Steel
- Builder:
- Pacific Boat
- Location:
- Washington
70’x24’x10’ steel combination vessel, currently configured as a crabber and tender. Jensen-designed, built in 1978 by Pacific Boat. Cummins KTA19 main engine rated at 700 hp. Twin Discs AG-527 gear with 5.17:1 ratio. (2) 72 kW Marathon/John Deere 4045 gen sets. 950...
More Details- Year:
- 1990
- Length:
- 28
- Hull:
- Aluminum
- Builder:
- La Conner
- Location:
- Washington
28’x10.5’x3’ aluminum crabber and dive boat built by La Conner in 1990. Cummins 5.9LQSB main engine make 425 hp, low hours. Velvet Drive gear. Makes 20 knots. Yanmar 36 hp generator. (2) bether, stove, and sink. Includes Quincy 325 compressor and Gould water pump....
More Details- Year:
- 1978
- Length:
- 31
- Hull:
- Fiberglass
- Builder:
- Radon
- Location:
- California
31’x10.4’x4’ Radon built in 1978, rigged for longline, lobster, and as squid light boat. John Deere 6068 main rated at 265 hp w/ only 1,800 hours. Fuel capacity of 450 gallons in (3) tanks. Isuzu 4JB1 aux w/ new 28kw generator, currently housed in fish hold that pack...
More Details- Year:
- 1948
- Length:
- 65
- Hull:
- Wood
- Builder:
- Pacific Boat Builders
- Location:
- Oregon
65’x19’x9’ wood crabber built in 1948 by Pacific Boat Builders. Caterpillar 343 main engine rated at 320 hp. Twin Disc 514 gear with 4.5:1 ratio. 2,700 gallons fuel capacity. Makes 9 knots. Isuzu 50 kW and MER 12 kW (new 2024) gensets. Packs 80k# salmon, 45k# crab...
More Details- Year:
- 1991
- Length:
- 38
- Hull:
- Aluminum
- Builder:
- Munson
- Location:
- Washington
38’x13’x5’ aluminum dive boat built by Munson in 1991. John Deere 6061 main rated at 335 hp. Twin Disc 506 gear. Fuel capacity of 600 gallons in (3) tanks. Packs 10,000 lbs in (6) fish holds. Two-diver Nitrox system and Myhers water pumps, vanging boom w/ capstan,...
More Details- Year:
- 1964
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- Alaska
38’x13.2’x7’ fiberglass sternpicker built by Thermodyne in 1964, rigged for gillnet, crab, and longline. Detroit 6-71 main rated at 180 hp. Twin Disc 509 gear. Fuel capacity of 500 gallons in (2) tanks. 13 gpm Vickers hydraulic pump. Packs 20,000 lbs in (7) insulat...
More Details- Year:
- 1988
- Length:
- 32
- Hull:
- Fiberglass
- Location:
- Oregon
32’x11.5’x4’ fiberglass vessel built in 1988, rigged for crab and nearshore fishing. 205 hp John Deere 6068 main w/ Twin Disc gear. Northern Lights 5kw genset. 125 gallon fuel tank. Deck equipment includes Northwestern crab block w/ spare roller/peeler/plates and sp...
More Details- Year:
- 1978
- Length:
- 48
- Hull:
- Fiberglass
- Builder:
- Glass-Fab, Inc.
- Location:
- Oregon
48’x13.6’x6.3’ fiberglass crabber/longliner built by Glass-Fab Inc. in 1978. Isuzu UM6HK-AB3 main rated at 300 hp w/ approx. 2,200 hours. Twin Disc 509 gear. Isuzu 40kw genset. Fuel capacity of 1,200 gallons in (4) tanks. Packs 18,000 lbs crab in (2) tanked/insulat...
More Details- Year:
- 2020
- Length:
- 49
- Hull:
- Fiberglass
- Builder:
- Atlantic Boatbuilders
- Location:
- Rhode Island
49.11’x24.9’x6’ fiberglass Novi lobster boat built by Atlantic Boatbuilders in 2020. Cummins QSL9 main rated at 405 hp w/ ZF 325W gear. Kubota Phasor 21kw genset. Fuel capacity of 900 gallons in (2) tanks. 12” bow thruster. Fish hold dimensions are 24’x11’x4.5’, plu...
More Details- Year:
- 1982
- Length:
- 58
- Hull:
- Steel
- Builder:
- Van Peer
- Location:
- Washington
58’x19’x9.6’ steel seiner/crabber built by Van Peer in 1982. Cummins 855 rated at 400 hp w/ Twin Disc 514B. Detroit 471 40 kW genset. Chills 86k lbs in (2) insulated fish holds. Rebuilt 20 ton RSW w/ Bitzer compressor and updated titanium chiller. Marco 28” block,...
More Details- Year:
- 1979
- Length:
- 58
- Hull:
- Steel
- Builder:
- El Morro Boatworks
- Location:
- Washington
58’x18.6’x10’ steel seiner/crabber, built in 1979 by El Morro Boatworks. Cummins KT1150 main rated at 525 hp, rebuilt in 2022. Twin Disc 514 w/ 4:1 ratio. 65kw John Deere 4045, new in 2019. Fuel capacity of 4,500 gallons in (4) tanks. Packs 85,000 lbs salmon in tan...
More Details- Year:
- 1987
- Length:
- 58
- Hull:
- Aluminum
- Builder:
- Shore Boat Works
- Location:
- Washington
57’9”x20.5’x9’ aluminum, combination seine/pot/longliner built by Shore Boat Works (BC) in 1987. Cat D-343 rated at 365 hp rebuilt in 2018, w/ Twin Disc MG518 gear. John Deere 4045 40kW aux new in 2023 and Isuzu 4LE1 18 kW aux rebuilt in 2017. Packs 100k lbs combined...
More Details- Year:
- 1984
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- Rozema
- Location:
- Washington
32’x13’x3’ aluminum Rozema built in 1984, rigged as dive boat. Twin 210 hp Cummins 6BT mains w/ 3,200 hours each. ZF 280-A1 gears. Fuel capacity of 350 gallons in (2) tanks. Packs 5,000 lbs in (4) fish holds. Equipment includes Nuvair nitrox 2-diver system, screw co...
More Details- Year:
- 1990/2017
- Length:
- 58
- Hull:
- Steel
- Builder:
- Martin Allen Design
- Location:
- Oregon
58’x21'x7.5’ steel combination vessel rigged for crab, shrimp, and tuna. Martin Allen design built in Moss Landing, then sponsoned and rebuilt by Wahl/Giddings in 2017. Cummins K19 main rated at 600 hp, new in 2017. Twin Disc gear. 100kW and 65kW...
More Details- Year:
- 1991
- Length:
- 50
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- Washington
50’x15.5’x7’ combination fiberglass vesse built by Delta in 1991. Twin Cummins 8.3 main engines rated at 325 hp each, low hours. Twin Disc 507 gears with 1.98:1. Makes 20 knots, 15 knot cruise. 6 kW Lugger auxiliary. 50 GPM Vickers hydraulic pump. Packs 40,000 sal...
More Details- Year:
- 1969
- Length:
- 58
- Hull:
- Steel
- Builder:
- Pete Shires
- Location:
- Alaska
58’x16.8’x8’ steel combination seiner/troller/pot boat, built by Pete Shires in 1969. Rebuilt Detroit 8V92 rated at 450 hp w/ recently rebuilt Twin Disc 514c gear. Recent shaft work w/ new cutlass, dripless, and intermediate bearing. John Deere 4034T 35kW aux. Pack...
More Details- Year:
- 2022
- Length:
- 37
- Hull:
- Fiberglass
- Builder:
- Cuimond Marine/Millenium
- Location:
- Washington
37’x13’x4’ fiberglass crabber, Millenium hull, built by Guimond Marine in 2022. Ad-measured, eligible for US fisheries. Twin Yamaha outboards, 425 hp each, low hours. 23 knot cruise, 40 knots WOT. 300 gallons fuel capacity in (2) tanks. Predator 20 hp generator and...
More Details- Year:
- 1977
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Delta
- Location:
- California
47’x14’x5’ fiberglass Delta built in 1977 and rigged for crab and troll fisheries. Recently stretched and added aluminum top house. Cummins 855 main rated at 360 hp w/ Twin Disc 509 gear. Northern Lights 12kw genset. Fuel capacity of 1,000 gallons in (2) tanks. Foa...
More Details- Year:
- 1979
- Length:
- 50
- Hull:
- Steel
- Builder:
- Randy of Moss Landing
- Location:
- Washington
50’x16.4’x7.6 steel seiner/crabber built in Moss Landing, CA in 1979. John Deere 6090 rated at 330 hp w/ Twin Disc 5114 gear, both new in 2013. Isuzu B4BG1-B w/ 40 kW and new 12 kW gen sets. Packs 42k lbs in insulated fish hold. 30 ton titanium chiller, Carrier comp...
More Details- Year:
- 1978
- Length:
- 32
- Hull:
- Aluminum
- Builder:
- American Commercial
- Location:
- Oregon
32’x11.4’x5.5’ aluminum gillnetter rigged for crab, built in 1978 by American Commercial. 210 hp CAT 3208 main. Fuel capacity of 200 gallons in (2) tanks. Hydraulic steering w/ (3) stations. (4) insulated fish holds, (2) are tanked. Deck equipment includes crab dav...
More Details- Year:
- 1971
- Length:
- 50
- Hull:
- Steel
- Builder:
- Yaquina
- Location:
- Oregon
50’x14’x7’ steel crabber/troller built in 1971 by Yaquina. Caterpillar 3208 main engine makes 240 hp. Twin Disc 506 gear with 2.96:1 ratio. 25 kW Isuzu 4-cyl gen set. Packs 10k# in crab insert. Accommodations include v-berth, full galley, and head w/shower. Gear a...
More Details- Year:
- 1946
- Length:
- 40
- Hull:
- Wood
- Location:
- California
40’x12’x4.5’ wood combination vessel rigged for crab, longline, and trolling, built in 1946. Detroit 671 main w/ 11,000 hours on rebuild. Twin Disc 506 gear. Fuel capacity of 300 gal in (2) tanks. 10,000 lbs total hold capacity, 4,500 lbs in aluminum insert crab tan...
More Details- Year:
- 1972
- Length:
- 27
- Hull:
- Fiberglass
- Builder:
- R. Thomas
- Location:
- California
27’5”x10’2” fiberglass crabber/troller built by R. Thomas, Brookings, OR in 1972. Detroit 353 rated at 103 hp, new in 2008. Borg Warner model 71-C reduction gear. Dry fish hold packs 2400# in (8) 300# boxes plus spillage Slush tank insert for salmon. Crab gear incl...
More Details- Year:
- 1979
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Sunnfjord
- Location:
- California
38’x12.9’x6’ fiberglass Sunnfjord built in 1979 and rigged for crab, salmon, and open access. John Deere 6068 main rated at 266hp w/ Twin Disc gear. Northern Lights 4kw genset. 500 gallons fuel capacity in (2) tanks. Packs 3,000 lbs below deck, and another 4,000 in...
More Details- Year:
- 1991
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- Main Marine
- Location:
- Washington
44’x14’x6’ fiberglass crabber built by Main Marine in 1991. Twin Cummins QSB6.7 mains rated at 425 hp each w/ ZF 301A gears and low hours. Northern Lights 20kw genset. Fuel capacity of 600 gallons in (2) tanks. Cruises at 14 kts. Packs 9,000 lbs crab in (5) tanked...
More Details- Year:
- 1986
- Length:
- 58
- Hull:
- Steel
- Builder:
- Mid Coast Marine
- Location:
- Washington
58’x22’x10’ steel combination vessel built in 1986 by Mid Coast Marine. New Yanmar main rated at 755 hp w/ completely rebuilt Twin Disc 5170 gear. John Deere 4045 65-kW and John Deere 4039 42-kW gensets. Packs 130k lbs salmon in main hold, plus bait freezer. 27 ton...
More Details- Year:
- 1975
- Length:
- 108
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
108’x27’x9’ steel crabber built by Marco in 1975. Vessel sunk and salvaged in 2024. Reported to pack approximately 360k# pinks in 7,500 cu ft. Machinery and electronics are presumed to not be operable. Asking $100,000, make offers. ******Additional Terms******* V...
More Details- Year:
- 1973
- Length:
- 40
- Hull:
- Aluminum
- Builder:
- Elmer W. McEachern
- Location:
- Oregon
40’x11.9’x4.8’ aluminum troller built by Elmer W. McEachern (BC) in 1973. John Deere 6068 rated at 210 hp w/ Twin Disc MG550 gear. Packs 10k lbs in (1) newly fiberglassed and insulated fish hold. Crab insert, davit, picking boom, hay rack, (4) single spool gurdies, p...
More Details- Year:
- 1967
- Length:
- 92
- Hull:
- Steel
- Builder:
- Pac Fish
- Location:
- Washington
92’x26’ steel crabber built in 1967 by Pac Fish. Twin Caterpillar 3406B main engines rated at 360 hp each. Twin Disc MG-5140 gears with 4.5:1 ratio. (2) 190 kW Caterpillar 3306B gen sets, 40 kW Yanmar hotel gen set, new in 2025. Packs 275k# reds, 130k# crab in (2) f...
More Details