- Year:
- 1976
- Length:
- 34
- Hull:
- Fiberglass
- Location:
- Oregon
34’x11.5’x4.5’ fiberglass troller/crabber built in 1976. CAT 3208 main rated at 210 hp w/ 4,700 hours. Twin Disc gear w/ 1.97:1 ratio. Fuel capacity of 450 gallons in (3) tanks. Insulated tank insert packs 8,000 lbs. Deck equipment includes (4) single-spool gurdies...
More Details- Year:
- 1970
- Length:
- 41
- Hull:
- Wood
- Location:
- California
41’x15’x5’ wood troller built in 1970 in Longview, WA. Includes CA salmon troll permit and 250 pot CA crab permit. Cummins 290 main engine rated at 180 hp. Twin Disc 509 gear. Burns 5 gph at 7 knots. Packs 4,500# of crab in (1) fish hold with aluminum insert. Deck...
More Details- Year:
- 1963
- Length:
- 51
- Hull:
- Fiberglass
- Builder:
- Rawson
- Location:
- Oregon
51.5’x14’x5’ fiberglass crabber built by Rawson in 1963. John Deere 6068TFM rated at 225 hp. Twin Disc MG5061 with 2.5:1 ratio. 20 kW Isuzu 4LE genset. Packs 8k# crab in forward hold, 4k# iced tuna in aft hold, both insulated. 10 ton spray brine refrigeration syste...
More Details- Year:
- 1981
- Length:
- 56
- Hull:
- Steel
- Location:
- Washington
56’x16’x7’ steel purse seiner, Monk design, built in 1982. Detroit 871 rated at 350 hp w/ 4850 hrs on the rebuild. Perkins auxiliary runs hydraulic RSW system. Packs 75k lbs in (2) insulated fish holds. RSW w/ 18 ton compressor. Marco power block w/ gripper, deck w...
More Details- Year:
- 1979
- Length:
- 66
- Hull:
- Steel
- Builder:
- Howard Maki
- Location:
- Alaska
66’x19’x8’ steel combination vessel rigged for longline, crab, and tendering. Built in 1979 by Howard Maki. 500 hp Cummins KTA19 main w/ Twin Disc 516 gear. (2) John Deere 40kW gensets, one newly installed. (2) 35/25 gpm Vickers hydro pumps. Cold Sea 26-ton RSW system....
More Details- Year:
- 1970
- Length:
- 39
- Hull:
- Aluminum
- Builder:
- Rohd
- Location:
- California
39’x16’ aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furuno radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California...
More Details- Year:
- 1969
- Length:
- 104
- Hull:
- Steel
- Builder:
- Marco
- Location:
- Washington
104’x25’x12’ steel crabber/tender built by Marco in 1969. Cat D348 main engine rated at 750 hp, Cat gear. (2) Cat 155 kW gen sets. Packs 270,000# salmon in (2) holds. IMS 50 ton RSW system, overhauled 2018. Deck equipment includes an Aurora knuckle crane, pot launc...
More Details- Year:
- 2018
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- LaConner
- Location:
- Alaska
39’x14’x5.5’ LaConner fiberglass sternpicker/crabber built in 2018. Volvo Penta D13 main engine rated at 600 hp. Twin Disc MGX5126A gear with 2.5:1 ratio. Makes 10 knots. 8” bow thruster. Packs 17k# salmon in (7) insulated holds. IMS 5 ton RSW system. Deck equipm...
More Details- Year:
- 1999
- Length:
- 85
- Hull:
- Steel
- Builder:
- Fred Wahl
- Location:
- Oregon
85’x26’x12’ steel combination vessel built by Fred Wahl in 1999, and rigged for crab, longline/pots, and albacore. Cummins QSK19-M3 main rated at 750 hp, and Twin Disc 5052 gear. Auxiliary engines include 150kw John Deere 6068, 100kw John Deere 4045, and 25kw Isuzu....
More Details- Year:
- 1979
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Bruno and Stillman
- Location:
- Alaska
42’x13’ fiberglass sternpicker built by Bruno and Stillman in 1979. GMC471 main engine rated at 145 hp. Twin Disc MG509 gear with 2:1 ratio. Vickers hydraulic pump, 24 gpm. Packs 9k# in slush ice, (4) insulated fish holds. 4k# bait hold. Deck equipment includes Kine...
More Details- Year:
- 1979
- Length:
- 29
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- Oregon
29.4’x12.3’ fiberglass crabber built by Modutech in 1979. Cat 3208 rated at 300 hp. Mitsubishi 19 kW auxillary. Single hold packs 4000 lbs crab. Includes crab block and hydraulic davit. Electronics include multi system display w/ GPS, plotter, radar and sounder. I...
More Details- Year:
- 1967
- Length:
- 41
- Hull:
- Wood
- Builder:
- Von Pegert-Humbert
- Location:
- Oregon
41’x11.9’x5.5’ wooden crabber/troller built by Von Pegert-Humbert in 1967. Detroit 671 rate at 165 hp with Tonan 509 gear. Tandem 20 gal hydraulic pumps. Single fish hold packs approx 11k lbs. (2) 3-spool Kolstrand gurdies, 17” Marco power block. Electronics include...
More Details- Year:
- 1964
- Length:
- 84
- Hull:
- Steel
- Builder:
- American Marine
- Location:
- Alaska
84’x33’x10.5’ steel combination vessel, currently set up as a tender. Twin Cummins QSM11455 main engines rated at 450 hp, installed in 2022. Twin Disc 514C gears with 3.5:1 ratio. 170 kW Daewoo, 150 kW GMC 8V71T, and 40 kw Isuzu gensets. Packs 250k# in (3) fish hold...
More Details- Year:
- 1974
- Length:
- 35
- Hull:
- Fiberglass
- Builder:
- CP Chang
- Location:
- California
35’x12’x6’ fiberglass crabber w/ permit built by CP Chang in 1974. Volvo AD41P main rated at 220 hp w/ 5,000 hours. Borg Warner gear w/ 2:1 ratio. Fuel capacity of 325 gallons in (2) tanks. Packs 6,000 lbs in tanked and insulated fish hold. Includes aluminum articu...
More Details- Year:
- 1987
- Length:
- 44
- Hull:
- Fiberglass
- Builder:
- C&M Marine
- Location:
- Alaska
44’x13’3”x8’8” fiberglass troller built by C&M in 1987. John Deere 6414 main rated at 150 hp w/ Twin Disc 506 gear, both rebuilt in 2019. Fuel capacity of 600 gallons in (2) tanks. Tanked and insulated fish hold packs 15,000 lbs iced, with (2) 2,000 lb slush tanks on...
More Details- Year:
- 1966
- Length:
- 58
- Hull:
- Steel
- Builder:
- Martinolich
- Location:
- Alaska
59’x17’x7’ steel crabber built by Martinolich in 1966. Caterpillar D343 main engine makes 400 hp, 1500 hours on rebuild. Twin Disc MG514 gear with 4.5:1 ratio. Makes 7 knots. (2) 20 kW Northern lights gen sets. 2,250 gallons fuel capacity in (3) tanks. Packs 50k#...
More Details- Year:
- 1967
- Length:
- 48
- Hull:
- Steel
- Builder:
- Unknown
- Location:
- Oregon
48’x14.3’x9.5’ steel crabber and tuna vessel built in 1967 in Richmond, CA. CAT 3306 main rated at 220 hp w/ Twin Disc 509 gear. Isuzu 4LE2 aux for RSW/ hydraulics and Isuzu 20kw genset. Fuel capacity of 1,600 gallons in (2) steel tanks. 20-ton spray brine system w/...
More Details- Year:
- 1975
- Length:
- 44
- Hull:
- Steel
- Builder:
- Monk Design
- Location:
- California
44’x12.5’x6.2’ steel Monk designed CA crab/troll package including permits. Cummins QSL9 rated at 285 installed new in 2009, w/ only 3,000 hours. Twin Disc 509 w/ 3:1 ratio. Fuel capacity of 1,000 gallons in (2) tanks, and has new double racor filter system. Packs 9...
More Details- Year:
- 2017
- Length:
- 47
- Hull:
- Fiberglass
- Builder:
- Custom
- Location:
- California
47’x15’x5.5’ custom built lobster boat. Keel laid by Long Beach Boatyard (CAN) in 2005, owner completed in 2017. Twin John Deere 8.1 mains rated at 380 hp each, both w/ low hours. ZF 280-1A gears. Isuzu 15kw genset. Fuel capacity of 1,000 gallons. Packs an estimated...
More Details- Year:
- 1993
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Nuwave
- Location:
- California
36’x12’x3’ fiberglass combination vessel, rigged as a crabber and squid light boat, built by Nuwave in 1993. CA brail squid permit included. Twin Tier 3 Cummins QSC 8.3 main engines, installed new in 2016, make 500 hp each. ZF286 marine gear. Makes (31) knots. 800...
More Details- Year:
- 1986
- Length:
- 53
- Hull:
- Fiberglass
- Builder:
- Beck/LeClerq
- Location:
- Alaska
53’x15’x3.5’ fiberglass Beck/LeClerq combination vessel, built in 1986. Currently rigged as a crabber. Lugger 6125 main engine rated at 410 hp. Makes 7.5 knots at 9 gph. Twin Disc 509TD gear with 2:1 ratio. 30 kW Isuzu gen set. Packs 20k# crab,40# of salmon in (1)...
More Details- Year:
- 1974
- Length:
- 38
- Hull:
- Fiberglass
- Builder:
- Ledford
- Location:
- Oregon
38’x13’x4.2’ fiberglass 1974 Ledford seiner w/ OR 300 pot crab permit, rigged for crab, gillnet, and seine. John Deere 6068T main rated at hp w/ Twin Disc 506 gear. 450 gallon fuel capacity in (2) tanks. Packs 7,000 lbs crab in tanked middle hold, plus two un-tanked...
More Details- Year:
- 1990
- Length:
- 54
- Hull:
- Fiberglass
- Builder:
- Little Hoquiam
- Location:
- Washington
54.9’x17’x10.5’ fiberglass Little Hoquiam built in 1990, rigged for crab and seine. Cummins 855NA main rated at 425 hp, w/ Tonanco TN-7295 gear. John Deere 4045 65kw genset. Fuel capacity of 2,000 gallons in (2) tanks. Packs 41,000 lbs of crab, or 80,000 lbs of salm...
More Details- Year:
- 1973
- Length:
- 36
- Hull:
- Fiberglass
- Builder:
- Modutech
- Location:
- California
36.1’x12’x5’ fiberglass combination crabber/charter boat built by Modutech 1973. Extensive rebuild w/ shortened house, new floors, bunks, aluminum fuel tank, steering and back deck. Cruises at 10-12 knots. Cat 3208 rated at 375 hp w/ Twin Disc 506 gear. Northern Lig...
More Details- Year:
- 1965
- Length:
- 42
- Hull:
- Wood
- Builder:
- Remen
- Location:
- Oregon
42’x12’x7’ wood troller/crabber with permits, built by Remmen in 1965. Detroit v6-71 main rated at 165hp w/ Capital gear. Fuel capacity of 800 gallon in (4) tanks. Fiberglassed fish hold packs 8 tons iced tuna, and 8k lbs crab in insert. Deck equipment includes 19” J...
More Details- Year:
- 1990
- Length:
- 42
- Hull:
- Fiberglass
- Builder:
- Polar Boat Works
- Location:
- Alaska
42’x14.5’x4’ fiberglass gillnetter built by Polar Boat Works, AK in 1990. John Deere 6081AFM75 rated at 375 hp w/ Twin Disc 5111. Lugger Northernlights 5.5 kW genset. Makes 10 knots at 9.5 gph fuel consumption. Packs 30,000 in (3) insulated fish holds. Aluminum art...
More Details- Year:
- 1967
- Length:
- 39
- Hull:
- Fiberglass
- Builder:
- Thermodyne
- Location:
- California
38.7’x13.8’ fiberglass combination crab/troller/seiner built by Thermodyne in 1967. Aluminum top house w/ Lexan windows. Detroit 8V-71 main w/ Twin Disc 509 gear. Northern Lights 9kW genset. Hydraulic driven 7.5 ton RSW system. Insulated fish hold divided into (3)...
More Details- Year:
- 1928
- Length:
- 46
- Hull:
- Wood
- Builder:
- Strom & Orum
- Location:
- California
46’x13’x7’ wood troller/crabber with permits, built in 1928 by Strom and Orum in Tacoma, WA. Detroit 671 main rated at 165 hp, w/ 2,500 rebuilt hrs. Twin Disc 509 gear. Perkins 7.5 kW genset. Fish hold packs 24,000# not tanked, 9,000# in crab instert, and 6,000# sal...
More Details- Year:
- 2005
- Length:
- 34
- Hull:
- Aluminum
- Builder:
- Custom
- Location:
- California
34’10”x16’x4’ custom aluminum vessel built in 2005 and significantly updated in 2016, rigged for crab and troll fisheries. John Deere 6068 main rated at 330 hp w/ 8,700 hours. ZF 22A gear. Westerbeke 7.6 kW genset. 260 gallon fuel tank. Tanked fish hold packs 6,000...
More Details- Year:
- 1978
- Length:
- 41
- Hull:
- Aluminum
- Builder:
- Sea Venture
- Location:
- Alaska
41’x12’ aluminum gillnetter built in 1978 by Sea Venture. John Deere 6076T main engine rated at 225 hp. Twin Disc MG506 gear with 2:1 ratio. Burns 4.5 gallons at 8.5 knots. Packs 13k# in (5) fish holds. Galley with stove. Head with sink and shower. Deck equipmen...
More Details