Crabbers[77 listings]

Click here to be notified of updates to the Crabbers pagewatch helphelp
« first ‹ previous next › last »
Vessels 51 - 77 of 77
$95,000
thumbnail CR18-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 34    Hull: Fiberglass    Builder: Westport    Location: Oregon
34'x10.7'x4.6' fiberglass crabber built by Westport in 1974. CAT 3208 main rated at 425 hp, w/ only 700 rebuilt hours. ZF301 gear. 7.5 kW Onan genset. Cruises at 12 knots. Aluminum crab insert packs 4,500#, and 8,000# w/ raised hatch combing. Includes 17” Warren Junes block and 38 gpm hydro pump. Electronics include (2) GPS, VHF, plotter, SiTex radar, and Garmin sounder. OR 200 pot crab permit and 175 Trilogy crab pots available. Call for more info. Asking $95,000.
$439,500
thumbnail CR18-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 40    Hull: Fiberglass    Builder: Wegley    Location: Washington
41.5’x13’x4’ fiberglass combination vessel, rigged for crab and gillnet. Hull built by Wegley, completed in 2016. CAT C-9 main rated at 503 hp, w/ appx. 1,000 hours. ZF 360A reduction gear. Westerbeke 5.5 kW gen set. 640 gallon fuel capacity. 16 knot cruising speed and 24 knot max. Packs 25,000 #s in one fish hold. Aluminum mast and boom. Electronics include GPS, VHF, Furuno radar, sounder and plotter, ComNav autopilot, and Xantrex inverter. Very clean boat and turn-key operation. Call for survey and more information. Asking $439,500.
$300,000
thumbnail CR18-016  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 38    Hull: Fiberglass    Builder: Delta/LeClerq    Location: California
38'x12.6'x3.2' combination vessel built by Delta Marine/LeClerq in 1977. Volvo TMD70-B main. Twin Disc MG-506 gear. Twin Disc SM-11 power take off. All new hydraulics, SS lines, plumbing and pumps. Aluminum rigging w/ topping, vanging, and cargo winches. Crab tank insert packs 3k lbs. New 17" Junes crab block. Trolling gurdies w/ new motors. Packs 20k lbs in tankable fish hold. 700 gallons fuel capacity in two tanks. New steering helm pumps. Electronics include VHF, new ComNav autopilot, Furuno Navnet II system including GPS, radar, sounder, and plotter. Includes CA250 crab permit good to 47' LOA. Complete package for $300,000.
$135,000
thumbnail CR18-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 40    Hull: Aluminum    Builder: McEarchen    Location: Alaska
40'x11.5'x5' Canadian aluminum gillnetter, built by McEarchern in 1970. 230 hp John Deere 6068 w/ 1,000 hours, new in 2017. Twin Disc 509 gear. 800 gallon fuel capacity in (2) aluminum tanks. Packs 20,000# in (3) insulated holds. Brand new shaft, cutlass bearing, and and shaft seal 2018. 10" shrimp block, Maritime Fabrication stern roller, new Kinematics drum with Twister drive and levelwind, aluminum picking boom, and (2) PL-2 Pullmasters. Electronics include GPS, VHF, radar, sounder, ComNav autopilot, and computer w/ Nobeltec. Great combination vessel with lots of recent upgrades. Call for survey. Asking $135,000.
$235,000
thumbnail CR18-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1989    Length: 46    Hull: Aluminum    Location: Washington
46'x15'x5.9' aluminum combination vessel, built by Bill Redding in 1989. Tier 2 John Deere 6068T main, rated at 250 hp, and ZF reduction gear. Isuzu C240 w/ 20 kW Lima Mac generator. 800 gallon fuel capacity in (2) tanks. Setup to blast freeze with Carrier 056 compressor, new 10 hp motor. Fish hold packs 6.5 tons of frozen albacore. (2) 3-spool Easthope gurdies, Hydroslave line hauler, and salmon/troll gear. Electronics include GPS, VHF, SSB, radar, Furuno sounder, ComNav 2001 autopilot, and Global Star satellite phone. CA salmon permit included, and OR salmon permit available. Versatile boat with great history. Call for survey and more info. Reduced to $235,000.
$35,000
thumbnail CR18-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 30    Hull: Fiberglass    Builder: Wilson Boats    Location: California
30'x10.5'x4' fiberglass combination vessel built by Wilson in 1980, and rigged for multiple fisheries. Cummins rated at 210 hp w/ 3,700 hours. Borg Warner T3 gear. Cruises at 18 knots burning 5 gph, top speed of 22 knots. Packs 5,000 lbs in fiberglass hold. 12" Junes crab block, and 300 gallon live well. Includes galvanized 3 axle trailer. Electronics include GPS, VHF, radar sounder, plotter, and auto pilot. Reduced to $35,000.
$50,000
thumbnail CR18-007  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1996    Length: 29.7    Hull: Fiberglass    Builder: Little Hoquiam    Location: California
29.7'x11.7'x2.9' longline/crab/troll vessel built by Little Hoquiam in 1996. Cummins 6BTA rated at 210 hp. ZF gear w/ 2:1 ratio. 225 gallons fuel capacity in two aluminum tanks. Packs 8,000# crab. All aluminum rigging. Electronics include GPS system, (2) VHF, Furuno 16 mile radar, sounder, plotter, and inverter. Includes crab davit, longline hauler, and (15) totes of black cod gear. Asking $50,000.
$850,000
thumbnail featured listing CR18-004  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 50    Hull: Steel    Builder: Monk Design    Location: California
50'x15'x8.5' steel combination vessel, rigged for crab and tuna. Monk design, built by W. Robertson in 1979. Cummins main rated at 325 hp. Kubota 30 kW auxiliary. 1,800 gallon fuel capacity in (4) tanks. 10 ton Spray Brine system w/ 5F30 Carrier compressor. Capacity of 26,000# crab in tanked hold. Electronics include GPS, (2) VHF, SSB, radar, sounder, computer, and ComNav 1001 autopilot. Includes deck equipment and gear for salmon and tuna. 500 fully rigged crab pots. CA 500 pot crab permit good to 50', CA and OR salmon troll permits. Complete turnkey package with permits and gear. Call for survey. Asking $850,000.
$750,000
thumbnail CR18-002  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1963    Length: 58    Hull: Steel    Builder: Martinolich    Location: Washington
58'x18'x7' steel seiner built by Martinolich in 1963. Detroit D-60 Series rated at 465 hp. Twin Disc 514 gear. Isuzu 35 kW genset. Titanium 20 ton RSW system. Packs 75,000# salmon, w/ 50k# in main hold and 25k# in aft hold. Marco power block, aluminum boom w/ slider, self pursing Pilkington deck winch. Electronics include (2) GPS, (2) VHF, radar, (2) Furuno sounders, Furuno sonar, and ComNav autopilot. Includes 20' aluminum skiff, 17.5' spare aluminum skiff, 450 mesh SE seine, 400 mesh SE seine, Puget Sound seine, and lots of good web. Southeast seine permit included. Call for survey. Asking $750,000 for everything.
$450,000
thumbnail CR18-001  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 72    Hull: Steel    Builder: Bender    Location: Alaska
72'x22'x9.9' steel combination vessel, built in 1970 by Bender. Rigged for crab, longline, and pot cod fishing. John Deere 6125 main rated at 360 hp, installed 2009. Twin Disc 514 6:1 gear. 20 kW Isuzu (rebuilt 2017) and 30 kW GMC gen sets. Major steel work done in 2005. 8,000 gal fuel, 3,000 water. Deck gear includes crab block, bait chopper, launcher, hauler, and more. Good electronics. Dungy pots, cod pots, and halibut gear available. Asking $450,000.
$750,000
thumbnail CR17-050  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 46    Hull: Fiberglass    Builder: Little Hoquiam    Location: California
46'x14.3' fiberglass combination crab/tuna/troller built by Little Hoquiam in 1977. Detroit 671 rated at 165 hp w/ Twin Disc 509 reduction gear. Isuzu C240 10kw genset. 1700 gallons fuel in (4) tanks. Blast freezer w/ Carrier compressor. Insulated fish hold packs 11k lbs of salmon. Crab tank insert holds 7k lbs crab. New Junes 19" crab block. 350 Custom 38" pots, fully rigged. Electronics include GPS, SSB, sounder, plotter, VHF, radar and autopilot. Includes CA 350 pot good to 51' LOA, CA and OR salmon permits. Call for a survey. Asking $750,000.
$625,000
thumbnail CR17-044  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 46    Hull: Fiberglass    Builder: Little Hoquiam    Location: California
46'x14.3' fiberglass combination crab/tuna/troller built by Little Hoquiam in 1977. Detroit 671 rated at 165 hp w/ Twin Disc 509 reduction gear. Isuzu C240 10kw genset. 1700 gallons fuel in (4) tanks. Blast freezer w/ Carrier compressor. Insulated fish hold packs 11k lbs of salmon. Crab tank insert holds 7k lbs crab. New Junes 19" crab block. 350 Custom 38" pots, fully rigged. Electronics include GPS, SSB, sounder, plotter, VHF, radar and autopilot. Includes CA 350 pot good to 51' LOA, CA and OR salmon permits. Call for a survey. Reduced to $625,000.
$415,000
thumbnail CR17-043  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1986    Length: 53    Hull: Fiberglass    Builder: Beck/LeClerq    Location: Alaska
53'x15'x3.5' fiberglass Beck/LeClerq seiner, built in 1986. Lugger 6125 main rated at 410 hp. Twin Disc 509 gear. Isuzu 30 kW gen set. IMS 15 ton RSW system chills 40,000 lbs. Rigged to seine with deck winch, power block, main boom w/ slider, (2) picking booms w/ PL4 winches. Electronics include VHF, GPS, radar, sounder, plotter, and ComNav autopilot. Seine gear available. Reduced to $415,000.
$475,000
thumbnail CR17-042  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1994    Length: 62    Hull: Aluminum    Builder: Hoy's Marine    Location: Washington
62'x23'x8' aluminum combination vessel, has been used for trawl, crab, and tendering. Triple screw w/Cat 3176 mains rated at 600 hp ea, Twin Disc 5112V 1.8:1 gears. (2) 52 kW John Deere gen sets. Two floodable holds, packs appr 80,000# with 20 ton RSW system. Aluminum trawl gantry. Electronics include ComNav autopilot, (2) Furuno radars, (2) GPS, (2) color sounders, SSB, (2) VHF, and more. Nice interior finish. Asking $475,000.
$310,000
thumbnail CR17-040  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 38    Hull: Aluminum    Builder: Freeman    Location: Oregon
38'x13'x5.6' aluminum crabber/troller built by Freeman Marine in 1972. John Deere main rated at 200 hp, new in 2013. ZF Marine Gear. Northern Lights 8 kw genset. Packs 10,000 lbs. in insulated fish hold. Electronics include GPS, VHF, (2) SSB, Furuno radar, and ComNav autopilot. Crab block, bait chopper, salmon troll gear, and 300 Trilogy crab pots. 300 pot OR crab permit, salmon troll permit, and endorsed OR nearshore permit. Call for survey. Asking $310,000.
$300,000
thumbnail CR17-037  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 30    Hull: Fiberglass    Builder: Cloudburst    Location: California
30’x12’x3’ fiberglass crabber built by Cloudburst in 1982. Detroit 6V53 rated at 200 hp. Twin Disc 502 gear w/ 1.5:1 ratio. 12 GPH hydraulic pump off reduction gear. Warren Junes 15” crab block recently rebuilt. Packs 2,500 lbs crab in fiberglass fish hold. Includes (375) 36” crab pots, pot pump, totes and more. Electronics include GPS, radar, sounder, VHF and plotter. (2) berths, electric heater. Permits included CA 450 pot crab permit good to 35’ and CA Salmon. Total package for $300,000.
$1,200,000
thumbnail CR17-028  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2012    Length: 45    Hull: Fiberglass    Builder: Millennium Marine    Location: California
45'x16'x7' fiberglass lobster style vessel built by Millennium Marine in 2012. Complete California crab package INCLUDING 500 pot permit. Isuzu main rated at 505 hp w/ ZF 360A gear. 65 kw John Deere, w/ 40 gpm Spencer hydraulic pump. Packs 20,000 lbs crab below deck in (7) insulated, tankable fish holds. All deck equipment and gear included for crab, troll, and longline fisheries. Full electronics package. Permits include 500 pot CA crab permit good to 56' max LOA, CA salmon, and unlimited OR salmon troll. Call for survey and complete list of gear. Asking $1,200,000.
$20,000
thumbnail CR17-023  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 26    Hull: Fiberglass    Builder: Modutech    Location: Washington
26'x11' Modutech bowpicker, rigged for gillnetting, trolling, and pot fishing. Perkins 6-354T diesel rated at 275 hp. Borg Warner Velvet Drive gear. Drum and mast included. Reportedly packs 10,000#. Asking $20,000.
$279,000
thumbnail CR17-018  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 57.1    Hull: Wood    Builder: Zirlott Boatyard    Location: Alaska
57.1'x18.6'x9.1' wood combination vessel rigged for tendering, longline, and pots. Built in 1990 by Zirlott Shipyard. Cummins NTA855 main rated at 350hp. Twin Disc gear with PTO. Perkins 30kw generator, rebuilt 2015. Packs 50k lbs in RSW, and 30k lbs iced. 18 ton RSW system w/ titanium chiller, new in 2015. Electronics include (2)VHF, SSB, ComNav autopilot, Dell computer, and Garmin GPS, radar, and sounder. Asking $279,000.
$35,000
thumbnail CR17-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 29    Hull: Fiberglass    Builder: Modutech    Location: Oregon
29.1'x11.9' fiberglass combination crab/salmon/longliner built by Modutech in 1976. Perkins 6.354 rated at 160 hp. Borg Warner gear w/ 1.9:1 ratio. 300 gallon fuel capacity in (2) tanks. 17" Warren Junes crab block. Jim Harrison longline hauler. Salmon gurdies, aluminum poles and floppers. Packs 6,000 lbs of crab. Electronics include Furuno 1870F combo, autopilot, VHF, inverter and radar. OR endorsed nearshore permit available. Price reduced to $35,000 obo.
$130,000
thumbnail CR17-008  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 38    Hull: Fiberglass    Builder: Delta    Location: Alaska
38'x12.9'x3.5' fiberglass combination boat, built by Delta / LeClercq in 1974. Rigged for gillnet, crab and shrimp. 200 hp John Deere w/ appr 4750 hrs. Packs 14,000# salmon. Main and picking booms w/ PL2 winches. 12” crab block. Honda driven circulation. Electronics include GPS, (2) VHF, radar, (2) sounders, ComNav pilot w/ remote. Also available are SE drift permit w/ drum and roller, SE Tanner permit, and longline hauler and roller. Reduced $130,000.
$260,000
thumbnail CR17-001  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 58    Hull: Steel    Builder: Long Marine    Location: Alaska
58'x16.5'x7' steel seiner/pot boat, built in 1949 by Long Marine. Cat D343 main rated at 330 hp. Isuzu 30 kw gen set. 15 ton IMS RSW system. Electronics include Furuno radar, (2) VHF, (2) GPS, Furuno sounder, ComNav autopilot, computer w/ NobelTec. Packs appr. 80,000#. New galley appliances. Price reduced to $260,000.
$170,000
thumbnail CR16-025  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 58    Hull: Wood    Builder: Hansen    Location: Oregon
58'x16.5'x7.6' wood tender/crabber, built in 1964 by Hansen. 290 hp Detroit 8V71 main w/ appr 8,000 hrs on complete overhaul. New 25 kw Isuzu genset. 15 ton RSW system, packs 52,000 pounds in tanked fish hold. Hull recently recaulked. (2) picking booms w/ PL8 winches. 17" crab block. Electronics include (2) VHF, radar, color sounder, ComNav pilot, and more. Reduced to $170,000.
$1,075,000
thumbnail featured listing CR16-022  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 57.9    Hull: Steel    Builder: Union Bay Boat Works    Location: Washington
57.9'x27'x10' steel longliner that can easily be converted to seining, crabbing and pot cod. Originally built in 1979 and extensively rebuilt in 2007, including a bulbous bow and sponsons. Cummins KTA 19-M3 main rated at 640 hp. John Deere 50 kw and 27 kw generators. Teknotherm RSW. 95,000 lbs capacity in (2) fish holds. Full aluminum shelter deck, Marco autobaiter. Stainless hydraulic plumbing. Captains stateroom w/full head on bridge. Full shop and bait freezer in pilot house sponsons. Extensive electronics package including satellite compass, NavNet navigation system, Nobeltec navigation software, Furuno color video sounder and ECC Globe terrain building software. Top of the line vessel with numerous upgrades and recent shipyard work. Asking $1,075,000 for boat alone. WG pot, CG HAL, BS, and AI LLPs available at market value.
$260,000
thumbnail CR16-021  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1972    Length: 35    Hull: Fiberglass    Builder: Mel Martin    Location: Washington
35'x11.6' fiberglass crabber built by Mel Martin in 1972. Cat 3056D rated at 205 hp with ZF gear both new in 2009. (2) new aluminum fuel tanks with 270 gallons capacity. Fully rigged and ready to crab. Packs 10,000 lbs crab. Electronics include Robertson autopilot, radar, SSB, (2) GPS, and sounder. Remodeled galley with diesel stove, microwave, hot water, shower, head and (6) berths. Complete package including Puget Sound crab permit, 100 crab pots and portable generator. Price reduced to $260,000 for boat and permit.
$300,000
thumbnail CR16-008  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 39    Hull: Aluminum    Builder: Rohd    Location: California
39'x16' aluminum crabber built in 1970 by Rohd. Twin Detroit mains rated at 425 hp. Packs 6,000 lbs. Electronics include GPS, (2) VHF, Furono radar, sonar, sounder. New top house, crab tank, Glendinning engine controls, shaft and bearing. Includes a 250 pot California crab permit, crab block, davit, dump box and 183 (40") pots. Reduced to $300,000 for everything.
$85,000
thumbnail CR16-007  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1964    Length: 54    Hull: Wood    Builder: Sagstad    Location: Oregon
54'x16'x8' combination seine/troll/crab, built in 1964 by Sagstad Marine. Detroit 8V71 main. Twin Disc 509 gear with a top mount PTO. Isuzu 10 kw genset. Seine deck winch, power block, and bait chopper. Aluminum trolling poles and Easthope gurdies. Furuno GPS, Icom VHF, Icom SSB, Furuno radar and Furuno sounder. Oregon unlimited troll permit available. Asking $85,000.
$105,000
thumbnail CR16-002  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 44    Hull: Steel    Builder: Monk design    Location: California
44'x13'x6.2' Monk design steel CA salmon troll package. Cummins QSL9 rated at 285 installed new in 2009. Daewoo 24kw generator installed new 2009. Aluminum boom with vanging and 2 Pullmaster winches, pot hauler, boom mounted davit and Tulsa deck winch. Two large fish holds. All new bulwarks and trolling poles. Electronics includes ComNav autopilot, (3) Garmin GPS,Garmin radar, Simrad autopilot, Garmin and Furuno color sounders. Package includes CA salmon permit. Price reduced to $105,000.
$1,395,000
thumbnail CR15-037  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 58    Hull: Steel    Builder: John A Karuza    Location: Washington
58'x21'x10' ideal combination vessel rigged for seining, longlining and crabbing. Monk design built in 1991. John Deere 6135 450 hp main installed new 3 years ago. Twin Disc MG 516 gear w/ trolling valve, installed new 3 years ago. John Deere 65kw (new 3 years ago) and Isuzu 20kw generators. Bow thruster. Two hermitic Copland 12 ton and 15 ton RSW systems chills 90,000 pounds in 2 fish holds. 7,500+ gallons fuel capacity. Electronics include (2) Icom VHF, Furuno GPS, Furuno depth indicator, Standard Horizon Chart, Simrad autopilot, satellite compass, satellite phone, and (2) radar. Price reduced to $1,395,000.
$375,000
thumbnail CR15-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1990    Length: 42    Hull: Aluminum    Builder: Hydraulic Fishing Supply    Location: Alaska
42'x14.5'x4' combination seiner/gillnet vessel built in 1990 by Hydraulic Fishing Supply. Recently rebuilt twin Cat 3208 mains rated at 850 total horsepower. Recently rebuilt Twin Disc gears and new shafts. New 30kw Kubota generator and 12 ton RSW system. New hydraulic system including (2) 8.6 Eaton compensating pumps. Maritime Fab power roller and auto levelwind. Electronics include (3) VHF, ComNav autopilot, Furuno radar, Furuno color sounder, laptop and Furuno GPS. lots of recent work. Also available is a seine permit. Can be available with the seine package. Gillnet ready, asking $375,000.
$450,000
thumbnail CR15-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 56.6    Hull: Steel    Builder: Lackey    Location: Oregon
56.6'x16.5'x9.1' steel combination vessel built by Paul Lacky in 1969. Twin Cummins 8.3 liter 300hp mains. rebuilt in 2014. Twin Disc 509 3:1 gears. John Deere 4 cylinder 65kw aux. Deck equipment includes 3-spool gurdies, tuna pullers, long line hauler, and 19" Junes crab block. Electronics include VHF, SSB, CB, sounder, computer/plotter, radar, and auto pilot. Permits include Oregon 300 pot crab and Oregon salmon troll. Asking $450,000.
$30,000
thumbnail CR15-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1987    Length: 26    Hull: Fiberglass    Builder: home built    Location: Washington
26'x9'x2.5' fiberglass combination skiff built in 1987. 270 Crusader gas main with a new propellor. 350 Mercrusier spare main. 100 gallon aluminum fuel tank. 15 knot cruise. Fuel tanks, Aft deck, and gunnels new in 2009. Aluminum crab davit, 12" block and spare propellor. V berth provides storage. Electronics include Raytheon sounder, plotter and radar all in one. 8'x11.6" of open deck. Galvanized tandem axle trailer with surge brakes and new tires. Asking $30,000.
$390,000
thumbnail CR15-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 41.5    Hull: Fiberglass    Builder: Modutech    Location: Oregon
41.5'x11.5'x5' fiberglass crabber/troller, built in 1979 by Modutech. Partially enclosed tophouse. GMC 6V92 rated at 300 hp, 7.5 kw Whisper Watt gen set. Bait chopper, 17" crab block on davit, and 3 spool Simplex gurdies. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav autopilot. 4-man liferaft. Comes WITH 250 pot CA crab, 300 pot OR crab, and OR salmon troll licenses. Price reduced to $390,000. 300 pots available for sale to buyer of vessel.
$80,000
thumbnail CR15-005  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Length: 35    Hull: Fiberglass    Builder: unknown    Location: British Columbia
35'x12'x4' fiberglass crabber/prawn vessel. Volvo 71 main rated at 400 hp with only 200 hours. 16 know cruise. 14” hydro slave hauler, davit and sorting table. Electronics include GP-32 GPS, Standard Horizon VHF, Tough Book computer, Furuno radar, Furuno sounder, Nobeltech plotter and Xantrex 2000 watt inverter. Asking $80,000.
$97,000
thumbnail CR15-004  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 30    Hull: Aluminum    Builder: AK Workboats    Location: British Columbia
30'x10' aluminum Puget Sound crabber built by AK Workboats in 1991. Yanmar 6LYA rated at 315 hp. Arneson ASD8 surface drive. 20 knot plus cruise. Bow thruster. Crab davit, 12' Hydroslave crab block, landing table, Diamond Sea Glaze windows, Webasto forced air heater and 6 man life raft. Electronics include a Furuno FCV-620 sounder, Furuno 16 mile radar, Standard HZ GPS, Standard VHF and an inverter. Price reduced to $97,000.
$129,500
thumbnail featured listing CR14-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2004    Length: 32    Hull: Aluminum    Builder: Western Fabrication    Location: Washington
32'x10'x3' combination crab/longline/tuna vessel built in 2004 by Western Fabrication. Volvo Penta D4 main rated at 225 hp with only 326 hours. Dual prop outdrive. Honda 9.9 trolling motor. 120 gallon fuel capacity. Tuna poles, longline chute, crab block, davit and landing box. Electronics include an Icom VHF, Lowrance sounder, Garmin plotter, VMS. Easy loader trailer. Price reduced to $129,500.
$950,000
thumbnail CR13-031  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1967    Length: 160    Hull: Steel    Builder: Zigler    Location: Washington
160'x36' ex-supply vessel, built in 1967 by Zigler, converted to crab in 1990. Vessel has undergone major steel work, needs completion of refitting. Twin Cat 398 mains rated at 950 hp, partial rebuilds need completion. (2) 500 kw Detroit 16V92 gen sets, (1) 75 kw 4-71 gen set. 13,600 cu ft. freezer holds. 61,000 gal fuel and 28,000 water capacities. Interior needs refitting. Call for details. Asking $950,000.
Web Design, 3 Crown Creative