Crabbers[64 listings]

Click here to be notified of updates to the Crabbers pagewatch helphelp
« first ‹ previous next › last »
Vessels 1 - 50 of 64
$235,000
thumbnail CR18-059  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1991    Length: 40    Hull: Fiberglass    Builder: Lindell    Location: Washington
40'x13'x6' fiberglass combination crabber/troll/gillnetter built by Lindell in 1991. Lugger 6108 rated at 330 hp w/ Twin Disc 507 gear. Isuzu 3 cylinder aux w/ 10kW genset. (5) insulated fish holds back 10k lbs salmon or 5k lbs crab. Enclosed fly bridge and aluminum bait shed. Crab block, dump box, Hasbra gurdies, trolling poles, gillnet reel, and power roller. 600 gallons combined fuel capacity in (2) tanks. Electronics include SSB, radar, (3) GPS, VHF, plotter, autopilot and many more. Dickenson stove, shower, head, (4) berths, focsle heater and chest freezer. Call for a survey. Asking $235,000.
$240,000
thumbnail CR18-058  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 48    Hull: Wood    Builder: Sagstad    Location: Washington
48'x12.8'x6.7' wood crabber/troller built by Sagstad in 1947, total re-fit in 2012. Isuzu 3HK main rated at 300 hp and Twin Disc 509 gear, new in 2012. 20 kW Mitsubishi aux, new in 2012. Packs 10,000# crab in aluminum insert, or 6-8 tons tuna. New deck and aluminum bullwarks in 2012. Includes Warren Junes block, Custom crab davit, Kosltrand gurdies, hayrack, and aluminum trolling poles. Electronics include GPS, VHF, SSB, Furuno radar, Koden sounder, Garmin plotter, ComNav autopilot, and Faria VMS unit. Includes OR 200 pot crab permit good to 50' and approximately 145 pots. Turn-key package in excellent condition with lots of recent upgrades. Call for survey. Asking $240,000.
$17,000
thumbnail CR18-057  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 27    Hull: Fiberglass    Builder: Wilson    Location: California
27'x8' fiberglass crabber built by Wilson in 1982. Cummins 6BT main rated at 240 hp. Volvo duo prop 280 gear. Packs 1,600 lbs in fiberglass hold. New starter, batteries, and control cable. Autopilot included but not installed. Sleeps 2. Asking $17,000.
$330,000
thumbnail CR18-056  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 47    Hull: Fiberglass    Builder: Sunnfjord    Location: Oregon
47'x15'x7' fiberglass combination vessel built by Sunnfjord in 1978. GMC V671 main rated at 210 hp. Twin Disc 509 gear with 2.95:1 ratio. 25kW Isuzu C240 genset. Packs 16,000# salmon in a well-insulated fiberglass hold, with an 8,000# crab insert. Tankable. 5-ton Bohn blast-freeze system. Deck equipment includes a crab davit/block and (2) 3-spool salmon gurdies. Electronics include (2) VHF, sounder, radar, Furuno GPS, and autopilot. Includes 300 pot OR crab and OR Salmon troll permits. Call for survey. Asking $330,000.
$800,000
thumbnail CR18-055  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 57    Hull: Steel    Builder: Lasqueti Boat Company    Location: Alaska
57.9'x22'x7.5' steel combination longline/tender/pot vessel built in B.C in 1978 and sponsoned in 2008 by Arrow Marine. Cummins 855 rated at 410 hp w/ rebuilt Twin Disc 514 gear. Isuzu 22kW getset. New John Deere 4045 powers a 6 and 4 cube hydraulic pumps. 30 ton Carrier compressor w/ SS chiller, new condenser pump. (2) holds pack 90k lbs salmon. New 2k lbs Olympic knuckle crane and intermediate shaft. Reworked hydraulics w/ many new components. Aluminum shelter, Hanson pot launcher, Marco coiler, Yaquina puller w/ SS shivs, main boom and (2) picking booms. Complete electronics package that includes camera monitoring system. (6) berths. Call for a list of upgrades and a survey. Asking $800,000.
$155,000
thumbnail CR18-031  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 40    Hull: Fiberglass    Builder: Hansen    Location: Washington
40'x14'x4' fiberglass seiner/crabber built by Hansen in 1977. Volvo 120A main engine rated at 320 hp w/ 3,800 hours. Twin Disc 509 gear with 3:1 ratio. Cruises at 9 knots. Packs 40,000#. Deck equipment includes topping winch, purse winch w/new motor, Rockford PTO, gillnet drum, and Marco power roller. Hydraulics recently overhauled. Electronics include VHF, (2) GPS, radar, sounder, plotter, and autopilot. Asking $155,000.
$245,000
thumbnail CR18-054  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 42    Hull: Fiberglass    Builder: Delta    Location: Alaska
42'x14'x3.5' fiberglass seiner/crabber built by Delta in 1971. John Deere 6076 rated at 300 hp w/ Twin Disc 509 gear. IMS 15 ton RSW. Packs 31,500 lbs. Rebuilt 25/35 gpm Vicker and 6 cube Eaton hydraulic pumps. Marco auto purse winch, 26" power block w/ gripper stern roller and rebuilt davits. (2) fuel tanks hold 900 gallons. Recent upgrades include new top house floor, water tank, hydraulic lines, steering lines, back deck and rigging. Electronics include VHF, radar, inverter, and new plotter/sounder. Marine head, shower, diesel stove, (5) berths and fridge. Call for a complete list of upgrades and a survey. Asking $245,000.
$2,700,000
thumbnail CR18-053  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2000    Length: 58    Hull: Steel    Builder: Fred Wahl Marine    Location: California
58'x28.5'x13' combination vessel built in 2000 by Fred Wahl Marine. Cat 3412 main rated at 615 hp. Reintjes gear w/ 6:1 ratio. 190 kW Cat 3306, 105 kW Cat 3304, and 55 kW Cat 3304. Bulbous bow and 16" bow thruster. Packs 300,000# in (2) holds. 50 ton RSW system w/ titanium chiller. Main boom and telescoping picking boom, built by Snow. Kolstrand deck winch and 2-speed 33" Marco power block. Excellent electronics, including Simrad autopilot and Koden Sonar. Fully equipped with squid lights. Snow skiff, seine net, pump, and dewatering box available. Turn-key vessel with lots of recent upgrades. Call for survey and more info. Asking $2,700,000.
$398,000
thumbnail CR18-051  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1948    Length: 65    Hull: Wood    Builder: Pacific Boat Builders    Location: Oregon
65'x19'x9' wood crabber built by Pacific Boat Builders in 1948. Cat 343 main engine rated at 320 hp, with 150 hrs since rebuild. Twin Disc 514 gear with 4.5:1 ratio. 2,700 gallons fuel capacity. Makes 9 knots. Isuzu 50 kW and 8 kW gensets. Pack 80k# salmon, 45k# crab in (2) insulated fish holds. IMS 15 ton RSW unit on hatch. Deck equipment includes a new 19" crab block and tuna pullers. Electronics include (2) GPS, (2) VHF, (2) radars, computer with Nobletec, Furuno sounder, and ComNav autopilot. Very well-maintained vessel. Call for survey. Asking $398,000.
$75,000
thumbnail CR18-046  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 42    Hull: Aluminum    Builder: Breux's Bay Craft    Location: Oregon
42'x14'x4' aluminum crew boat rigged for crab and oil response, built by Breux’s Bay Craft in 1981. Twin Detroit 8v71 mains rated at 318 hp each. Allison gears w/ 2:1 ratio. Honda 2000 portable generator. Fluidyne 25 gal hydraulic pump w/ electric clutch. Packs 8,000# crab on deck in (8) totes. Electronics include VHF, (2) GPS, sounder, radar, and plotter. Includes crab block, davit, and dump box. Call for survey. Asking $75,000.
$295,000
thumbnail CR18-052  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1975    Length: 73    Hull: Steel    Builder: CD Carnes Welding Service    Location: Oregon
73'x18'x11' combination crab, tuna, longline, tender built in 1975 by CD Carnes in Morro Bay. John Deere 6125 main rated at 400 hp. New Twin Disc 514 gear with 4:1 ratio. Isuzu 35 kW and Mitsubishi 42 kW gensets. New dual blast freeze system on deck. Packs approximately 75k# of frozen product. Removable shelter deck. 8k gallons fuel capacity, 2k gallons water. New Simrad electronics package including radar, sounder, plotter, and steering panel. Comfortable accommodations comprised of (2) staterooms and (4) bunks forward. Economical, dependable vessel. Asking $295,000.
$1,250,000
thumbnail CR16-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 58    Hull: Fiberglass    Builder: Skandia Boat    Location: Washington
58'x18.5' fiberglass combination seine/crab/longliner built by Skandia in 1980. Efficient Isuzu main at 505 hp uses 7 gph. Twin Disc triple pump PTO and MG 514 gear. Isuzu 40 kw and John Deere 30 kw aux. Keypower 14" bow thruster. Chills 120k lbs salmon and 65 tons squid w/ twin 18 ton IMS chillers. Fish holds reconstructed at Delta Shipyard with 1" resin infused panels and additional deck reinforcement. Marco power block, Pilkington deck winch, crab davit, block, bait chopper, and complete longline deck set up. Tufflex watertight deck coating. Redundant state of the art electronics and spacious galley with washer/dryer. Call for a survey and complete list of deck gear. Asking $1,250,000.
$45,000
thumbnail CR15-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 48    Hull: Wood    Builder: K Carter    Location: California
48.6'x14'x6' combination California troll/crab package built in 1949 by K Carter. GMC 471 main rated at 190 hp. Capitol gear. Nassau 8 kw generator. 5,000 pound crab tank with a hydraulic lift. 4,000 pound insulated slush salmon tank. Stainless steel hayrack with 3 spool Kolstrand gurdies. Electronics include a Furuno 1650 GPS, Icom VHF, Furuno 48 mile radar, Raytheon sounder and a ComNav autopilot. Comes with a CA salmon troll permit. 250 pot crab permit and approx 190 pots available. Asking $45,000.
$1,400,000
thumbnail CR18-050  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 98    Hull: Steel    Builder: Bender    Location: Alaska
98'x24'x10' steel crabber/combination vessel built by Bender in 1980. Cat 3412 main engine rated at 624 hp, with minimal hours since re-build. Twin DIsc 520 gear with 6.11:1 ratio. (2) John Deere 6081, 175 kW gensets, and (1) Isuzu genset. Packs 200K# in (2) tanks with 40 ton RSW system. Deck equipment includes Marco King Hauler, Greensen deck crane estimated at 2,000#, and bait chopper. Electronics include (3) VHF, (2) radar, sounder, autopilot, GPS, and Nobel Tec navigation system. Call for survey. Asking $1,400,000.
$200,000
thumbnail CR18-049  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1924    Length: 47    Hull: Wood    Location: Oregon
47'x12.6'x5.8' wood crabber/troller, built 1924 in Friday Harbor, WA. Detroit 671 main rated at 165 hp. Twin Disc 509 gear. Mitsubishi 13 kW genset. Fuel capacity of 1,100 gallons in (2) tanks. Fish hold packs 17,000# salmon and 7,500# crab in aluminum insert. Includes (2) NW crab blocks, salmon gurdies, tuna pullers, and 100 crab pots. Electronics include (2) GPS, (2) VHF, radar, (2) sounders, plotter, and ComNav 1001 autopilot. CA and OR salmon troll permits and OR 300 pot crab permit good to 47' max INCLUDED, CA 500 pot permit good to 52' available. Call for survey. Asking $200,000.
$575,000
thumbnail CR18-048  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 49    Hull: Wood    Builder: Tacoma Boatyard    Location: Oregon
49'x13.8'x8' wood combination vessel rigged for crab/tuna/salmon. Home built by Tacoma Boatyard shipwright in 1947. NH250 Cummins main rated at 250 hp, rebuilt in 2017. Twin Disc 509 gear, rebuilt in 2017. 20kW Northern Light genset, new in 2016. Fuel capacity of 1,500 gallons in (3) tanks. Packs 14,000# crab in aluminum insert. Includes complete deck equipment for crab, salmon, and tuna. Electronics include Garmin GPS, VHF, radar, sounder, plotter, and ComNav autopilot. INCLUDES CA/OR salmon permits, 450 pot CA crab permit good to 54'. Crab pots available. Call for survey. Asking $575,000.
$400,000
thumbnail CR18-047  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 44    Hull: Steel    Builder: Figueiredo    Location: California
44'x14.2'x6.5' steel crabber built by Figueiredo in 1971. Cummins main rated at 250 hp, overhauled in 2009. Twin Disc reduction gear. Fuel capacity of 1,700 gal in (3) tanks. Vickers 24 gal and 30 gal hydraulic pumps off fwd/aft PTOs. Packs 19,000# in fish hold, insulated with fiberglass over foam. Electronics include GPS, (3) VHF, radar, Furuno sounder, plotter, and 3000w inverter. INCLUDES CA 400 pot crab permit good to 44' (+5'), crab block, and approx. 350 crab pots. Call for survey. Asking $400,000.
$150,000
thumbnail CR18-043  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1946    Length: 64.5    Hull: Wood    Builder: Tacoma Boat Works    Location: Washington
64.5'x18'x8' grandfathered limit seiner rigged as crabber/tender, built by Tacoma Boat Works in 1946. CAT D343 main w/ Twin Disc 514 gear. Isuzu 40 kw genset. 3,600 gallon fuel capacity in (4) tanks. Packs 78,000 lbs in (2) tanked, insulated holds. 30 ton RSW system, chills both fish holds. Deck equipment includes aluminum tuna poles, crab block, bait chopper, line coiler, and pot pump. Electronics include VHF, Garmin GPS, (2) Furuno radars, and Freeman autopilot. CA salmon permit available. Call for survey. Asking $150,000.
$2,600,000
thumbnail CR18-045  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1969    Length: 100    Hull: Steel    Builder: Pacific Fishermen Shipyard    Location: Washington
100'x36'x12.5' steel crabber built by Pacific Fishermen Shipyard in 1969. Cat D348 main engine rated at 750 hp. Twin Disc MG527 gear with ratio of 5.17:1. (2) Cat 3306B 165 kW and (1) Deere 4039D 40 kW gen sets. Packs 200,000# crab, 400,000# salmon. 40 ton RSW system built by Highland, new compressors, motors, condensers in 2017. 12 ton Slattery deck crane. Full tender package and hydraulic sorting table included. Electronics include (3) VHF, (2) Furuno radars, (2) Furuno GPS, and Robertson autopilot. Call for survey. Asking $2,600,000.
$115,000
thumbnail CR18-044  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 26    Hull: Fiberglass    Builder: Tollycraft    Location: Oregon
26'x10.5' fiberglass crabber built by Tolley Craft in 1985. Chevy gas engine rated at 320 hp w/ Borg Warner V-drive. Cruises at 22 knots. Junes 15" crab block w/ stainless steal back. Holds 3500 lbs in totes. (2) fuel tanks hold 140 gallons total. 28 GPM hydraulic pump w/ 65 gallon tank. Electronics include VHF, sounder, GPS and auto pilot. Includes OR 200 pot permit good to 26' and gear. Asking $115,000.
$180,000
thumbnail CR18-042  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1985    Length: 43    Hull: Aluminum    Builder: US Navy    Location: Washington
43'x13'x6' aluminum crabber/troller. Originally built as a US Navy aircraft personnel rescue boat, refitted as a commercial vessel. Twin GMC 871 main engines rated at 350 hp each, with Twin Disc 514 gears, 2:1 ratio. Cruises at 13 knots. 20 kW Northern Lights gen set. Packs 7,500# crab in insert. Crab block with davit. Electronics include VHF, (2) radars, (2) sounders, plotter, and ComNav autopilot. Includes OR 200 pot crab permit. Call for survey. Asking $180,000 for the package.
$195,000
thumbnail CR18-041  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1949    Length: 42    Hull: Wood    Builder: Poulsbo    Location: California
42'x12.3'x6.8' wood troller rigged for crab, albacore, and black cod. Built by Poulsbo in 1949. Detroit 6-71 main. Fuel capacity of 500 gallons in (2) tanks. Entirely new hydraulic system in 2018. Includes (2) custom inserts for the fish hold, aluminum insert packs 5,500# crab, and insulated insert chills 4,500# fish w/ RSW system. Custom aluminum boom w/ Junes block. Deck equipment is setup to quickly transition between fisheries. Includes 175 pot CA crab permit with a baseline length of 44' (+5). Very well rigged boat with lots of recent upgrades. Call for more information. Asking $195,000.
$610,000
thumbnail CR18-040  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1996    Length: 46    Hull: Steel    Builder: Meyer/Faulk    Location: Oregon
46'8"x14'x6' steel combination tuna/salmon/crabber built in Nanaimo, B.C. in 1996. Volvo TMD 120A. Twin Disc 514 gear w/ 3.5:1 ratio. Kubota 20kW genset. 10 ton plate freezer. Fiberglass fish hold packs 10 ton albacore, salmon in slush and 10k lbs of crab w/ insert. Aluminum house, rigging and hay rack. East Hope gurdies, 17" Warren Junes block and tuna pullers. Electronics include (3) GPS, radar, Sat phone, VHF, sounder, computer, camera monitoring and autopilot. Comfortable galley, (5) berths, and head. Includes OR 300 pot permit, 300 38" pots, gear, OR and CA troll permits. Call for a survey. Asking $610,000 for complete package.
$75,000
thumbnail CR18-038  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 25    Hull: Fiberglass    Builder: Farallon    Location: California
25'x8' fiberglass, built in 1982 by Farallon. 325 hp Mercruiser gas, only 2 hrs on engine. 12 gpm hydraulics, electric clutch. 500# fish hold. Crab block, davit, and salmon tree w/ poles. Electronics include GPS, plotter, autopilot, sounder, and (2) VHF. Asking $75,000
$135,000
thumbnail CR18-036  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2003    Length: 33    Hull: Fiberglass    Builder: Flowers    Location: California
33'x12'x5' fiberglass crab/lobster boat built by Flowers in 2003. Cat 3126 rated at 350 hp w/ Twin Disc 50/50. (1) fuel tank holds 180 gallons. Electronics include Garmin 1040 GPS, sounder, VHF, 36 mile radar and inverter. (2) V-berths. T5 - CA300 pot permit and gear available. Asking $135,000.
$225,000
thumbnail CR18-037  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1971    Length: 50    Hull: Steel    Builder: Yaquina Boat Works    Location: Oregon
50'x14'x7' steel troller/crabber built by Yaquina Boat Works in 1971. Remanufactured Cat 3208 main rated at 210 hp w/ new Twin Disc 506 gear installed in 2016. 25 kW Isuzu gen set. Packs 9,000# crab in insert. All wiring overhauled in 2013. Deck equipment includes 3-spool trolling gurdies, hydraulic tuna pullers, crab block with davit, and bait chopper. Electronics include (4) VHF, (2) Furuno GPS, radar, (2) sounders, and ComNav autopilot. OR 300 pot crab and OR Ocean Troll permits also available. Call for survey. Asking $225,000 for vessel.
$1,900,000
thumbnail CR18-033  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 72    Hull: Steel    Builder: Duke's Welding    Location: Oregon
72'x22'x10' steel combination vessel. Monk-design, built by Duke’s Welding in 1980. Currently set up as a crabber/shrimper. Cummins QSK19M main engine rated at 750 hp, installed new in 2015. Twin Disc MCX gear with 5:1 ratio. 100 kW and 50 kW Cummins, 36 kW Isuzu gen sets. Packs 70,000# in (2) holds. Deck equipment includes shrimp-style picking boom, (2) Tulsa 8,000#, outrigger winches, crab block with davit, coiler, and bait chopper. Electronics include (2) VHF, (2) sat phones, (3) sounders, (2) radars, (2) GPS, video camera system for back deck, Simrad autopilot, and (3) station Glendinning electronic engine controls. Very well-maintained vessel. Easily convertable to trawl or tender vessel. OR 500 pot and ocean shrimp permits available. Asking $1,900,000.
$1,250,000
thumbnail CR18-035  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1966    Length: 58    Hull: Steel    Builder: Hydraulic Supply    Location: Alaska
58'x24'x10' sponsoned combination seiner/crabber/dragger built in 1966 by Hydraulic Supply. In 2009 a new house and other major wiring and engine rebuild performed. Cat 3408 B main rated at 480 hp., rebuilt Sept 2017. Twin Disc gear. John Deere 6068 (new 2017) 50kw and Isuzu 35kw generators. New 5-blade prop. 120,000 lbs fish hold capacity. 18 ton IMS system. Electronics include GP 70 and Satellite compass, (2) VHF, SSB, computer, Furuno radar, Furuno sounder, ComNav autopilot, AIS and engine room and deck cameras. Asking $1,250,000.
$595,000
thumbnail CR18-030  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1981    Length: 52    Hull: Steel    Builder: Jack St. Clair    Location: Oregon
52'x20'x7' steel crabber/longliner/tender built by Jack St. Clair in 1981, and sponsoned in 2008 at Giddings. Cummins 855 main rated at 300 hp. Twin Disc 509 gear w/ PTO and 30 gpm hydraulic pump. 25kW and 30kW Northern Lights gensets. 18 ton IMS RSW system. All new stainless exhaust. Packs 28k lbs. crab and 60k lbs salmon in tanked fish hold. Electronics include (2) GPS, (3) VHF, plotter, sounder, computer, sat phone, and ComNav autopilot. Includes new aluminum house. Solid platform for any West Coast fishery. Call for survey and more info. Asking $595,000.
$200,000
thumbnail CR17-036  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 46    Hull: Fiberglass    Builder: Thermodyne    Location: Alaska
46'x14.6'x7.6' fiberglass combination vessel rigged for gillnet/crab/troll. Built by Thermodyne in 1973. GMC 8V-71 main rated at 318 hp, w/ approx 4,500 hrs. Twin Disc 512 gear. Perkins 4/236 aux w/ 12 kW Northern Lights gen set. Packs 30,000 lbs in (4) new insulated fish holds. Gillnet reel, 19" Warren Junes crab block, and (2) Kolstrand troll gurdies. Electronics include (2) GPS, VHF, 2-meter, Furuno radar, Furuno 585 sounder, and Simrad AP35 autopilot. Steering system overhaul in 2017. Fully rigged for multiple fisheries. Call for a survey. Price reduce to $200,000.
$400,000
thumbnail CR18-028  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1954    Length: 45    Hull: Wood    Builder: Erwin Baker    Location: California
45'x13'x5.8' wood crab/troll package w/ permits, built by Erwin Baker in 1954. Detroit 6v71 main rated at 225 hp. Twin Disc gear w/ 3:1 ratio. Packs 9,000# crab in aluminum insert. Deck equipment includes SS davit, Junes crab block, Easthope gurdies, and lots of salmon gear. Electronics include (2) Garmin GPS plotters, (2) VHF, (2) radars, (2) sounders, ComNav autopilot, and 3000 watt inverter. INCLUDES CA 400 pot crab permit good to 50' max LOA, and CA salmon permit. OR salmon permit and 350 crab pots are available. Call for survey. Asking $400,000.
$425,000
thumbnail CR18-029  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1947    Length: 47    Hull: Wood    Builder: Sagstad    Location: California
47'x12.7'6.7' wood combination vessel/permit package with significant upgrades including repower, completely new hydraulic system, and tanked/insulated hold. Built by Sagstad in 1947. Volvo Penta MD-9 w/ 300 hp, and ZFW325 gear, new in 2013. (2) Honda EU generators, 3kW and 2kW. Fish hold packs 13,000# crab and 8 tons of tuna. SS crab davit and Junes block, Hasbra 3-spool gurdies, (2) 2" pacer pumps, and aluminum boom. Extensive electronics package. INCLUDES CA 350 pot crab permit good to 50.2' max LOA and CA salmon permit. Complete turn-key package, call for more information. Also available are 350 crab pots (38") and OR salmon troll permit. Asking $425,000.
$12,000
thumbnail CR17-025  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 37    Hull: Fiberglass    Builder: Transpac    Location: Washington
37'x12' fiberglass pleasure vessel rigged as a crabber. Built by Transpac in 1979. 120 hp Perkins diesel. Crab block, sorting table and bait table. 200 gallons fuel capacity in (2) tanks. Belt driven hydraulics. (2) steering stations. 15kg Bruce anchor w/ electric winch. Electronics include GPS and sounder. (2) staterooms w/ (3) berths, head, shower and 40 gallon fresh water tank. Asking $12,000.
$375,000
thumbnail CR18-027  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1979    Length: 56    Hull: Steel    Builder: Chet Hullel    Location: Washington
56'x17'x8' steel seiner built in 1979 by Chet Hullel. Cummins NTA 350M main rated at 350 hp. Capital gear with 4.5:1 ratio. Isuzu 35 kW gen set. Packs appx 80,000#. 18 ton RSW system. Deck equipment includes Kinematics boom lift and lightly used Marco power block. Electronics include Furuno GPS. VHF, (2) radars, Furuno sounder, and autopilot. Recently improved 19' seine skiff and SE seine permit also available. Call for survey. Asking $375,000.
$3,000,000
thumbnail CR18-026  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1978    Length: 150    Hull: Steel    Builder: Halter Marine Services, Inc.    Location: Alaska
150’x38’x16’ steel crabber/tender, built in 1978 by Halter Marine Services. Twin GMC 16V149 mains rated at 970 hp each. Twin Disc MG-504 gear with 5.17:1 ratio. 260 kW and 300 kW 12V71 and 200 kW 8V71 Detroit gensets. Packs up to 700,000# salmon in 4 holds. Recently built ammonia RSW system w/ (2) Sabroe screw compressors and (4) Isotherm chillers. Freezing capacity of 265,000# crab. Two 2,000# knuckle cranes and picking boom. Equipment includes crab block, sorting table, and more. Electronics include (5) VHF, Sat phone, Furuno GPS, (2) radars, Global Tech plotter, (2) sounders, Robertson autopilot, and more. Asking $3,000,000.
$900,000
thumbnail CR18-025  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1982    Length: 45    Hull: Steel    Builder: Martin Allen    Location: California
45.9'x20'x6.6' steel crabber built by Martin Allen in 1982, completely rebuilt and sponsoned in 2015. Detroit 8v71 rated at 300 hp, rebuilt in 2015. Twin Disc MG 5111. Cummins 40kW genset w/ approx. 2,800 hrs. Packs 22k# crab. 20 ton IMS blast freeze RSW unit. Electronics include GPS, VHF, (2) sounders, Garmin plotter, ComNav 1001 autopilot, and VMS unit. SS davit, Junes block, Kolstrand gurdies, and rigged for bait fishing tuna. Includes replacement house, freestanding mast, and complete shipyard plans. CA 400 pot crab permit INCLUDED, good to 47' and never stretched. Call for survey and more information. Asking $900,000 for complete turn-key package.
$325,000
thumbnail CR18-024  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1976    Length: 38    Hull: Fiberglass    Builder: Modutech    Location: California
38'x12'6" fiberglass Modutech troller/crabber built in 1976. Cummins QSL9, rated at 285 hp and ZF gear, new in 2013. Burns 3 gph@8 kts. Packs 3,500# below deck, and 4,500# in totes w/ air system. Deck equipment includes new Junes SS davit, block, and line coiler. New hayrack and bow poles for trolling. Electronics include GPS, VHF, polotter, sounder, autopilot, computer, and more. Lots of recent upgrades, including new deck, fish holds, and completely re-wired. INCLUDES CA 300 pot crab permit good to 39', never been stretched, and CA salmon permit. Call for more info and list of upgrades. Asking $325,000.
$475,000
thumbnail CR18-023  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1999    Length: 48    Hull: Fiberglass    Builder: Rawson/Little Hoquiam    Location: Alaska
48'x15'x8.5' fiberglass combination vessel. Rawson hull, completed in 1999 by Little Hoquiam Boatworks. Twin John Deere 6076 mains rated at 250 hp each. Twin Disc 5061 gear with 2:1 ratio. Cruises at 10 knots. 25 kW Yanmar generator. Packs 40k lbs of salmon. 15 ton IMS RSW system. Longline reel, bait table, Simplex gurdies, trolling poles, fiberglass shelter w/ canvas cover. Deck crane and rolling chalks. VHF, Furuno autopilot, GPS, Foruno radars (2), color video sounder, and Nobeltech navigation system. Call for survey. Asking $475,000.
$3,000
thumbnail CR18-021  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1973    Length: 28    Hull: Wood    Location: Washington
28'x10'x3.5' wood vessel built in 1973, needs finish work. 6 cylinder Bedford diesel main, rated at 120 hp. Twin Disc gear w/ 1.5:1 ratio. 8 knot cruise. Hydraulic steering w/ (2) stations. 60 gallon fuel capacity. Project boat with great potential. Asking $3,000 or make an offer!
$42,000
thumbnail CR18-020  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1946    Length: 46.5    Hull: Wood    Builder: Truetle Marine    Location: Washington
46.5’x12.5’x6.5’ wood crabber/troller built by Truetle Marine in 1946. CAT 3306 main rated at 210 hp. Twin Disc 509 gear. 6.5 kW gas generator. Packs 4,500# crab in aluminum instert, 10,000# w/ totes, and 5 tons of iced tuna in fish hold. Copper coil RSW system can freeze albacore. 300 gallon live bait tank. Deck equipment includes; SS Warren Junes (2) tuna pullers, davit, and 17” crab block; Kolstrand gurdies; aluminum rigging, bulwarks, and hatches. Electronics include (2) GPS, (2) VHF, radar, sounder, plotter, and ComNav autopilot. 300 pot WA crab license available for lease. Call for survey. Asking $42,000.
$95,000
thumbnail CR18-019  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1974    Length: 34    Hull: Fiberglass    Builder: Westport    Location: Oregon
34'x10.7'x4.6' fiberglass crabber built by Westport in 1974. CAT 3208 main rated at 425 hp, w/ only 700 rebuilt hours. ZF301 gear. 7.5 kW Onan genset. Cruises at 12 knots. Aluminum crab insert packs 4,500#, and 8,000# w/ raised hatch combing. Includes 17” Warren Junes block and 38 gpm hydro pump. Electronics include (2) GPS, VHF, plotter, SiTex radar, and Garmin sounder. OR 200 pot crab permit and 175 Trilogy crab pots available. Call for more info. Asking $95,000.
$439,500
thumbnail CR18-017  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 2015    Length: 40    Hull: Fiberglass    Builder: Wegley    Location: Washington
41.5’x13’x4’ fiberglass combination vessel, rigged for crab and gillnet. Hull built by Wegley, completed in 2016. CAT C-9 main rated at 503 hp, w/ appx. 1,000 hours. ZF 360A reduction gear. Westerbeke 5.5 kW gen set. 640 gallon fuel capacity. 16 knot cruising speed and 24 knot max. Packs 25,000 #s in one fish hold. Aluminum mast and boom. Electronics include GPS, VHF, Furuno radar, sounder and plotter, ComNav autopilot, and Xantrex inverter. Very clean boat and turn-key operation. Call for survey and more information. Asking $439,500.
$300,000
thumbnail CR18-016  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 38    Hull: Fiberglass    Builder: Delta/LeClerq    Location: California
38'x12.6'x3.2' combination vessel built by Delta Marine/LeClerq in 1977. Volvo TMD70-B main. Twin Disc MG-506 gear. Twin Disc SM-11 power take off. All new hydraulics, SS lines, plumbing and pumps. Aluminum rigging w/ topping, vanging, and cargo winches. Crab tank insert packs 3k lbs. New 17" Junes crab block. Trolling gurdies w/ new motors. Packs 20k lbs in tankable fish hold. 700 gallons fuel capacity in two tanks. New steering helm pumps. Electronics include VHF, new ComNav autopilot, Furuno Navnet II system including GPS, radar, sounder, and plotter. Includes CA250 crab permit good to 47' LOA. Complete package for $300,000.
$145,000
thumbnail CR18-015  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1970    Length: 40    Hull: Aluminum    Builder: McEarchen    Location: Alaska
40'x11.5'x5' Canadian aluminum gillnetter, built by McEarchern in 1970. 230 hp John Deere 6068 w/ 1,000 hours, new in 2017. Twin Disc 509 gear. 800 gallon fuel capacity in (2) aluminum tanks. Packs 20,000# in (3) insulated holds. Brand new shaft, cutlass bearing, and and shaft seal 2018. 10" shrimp block, Maritime Fabrication stern roller, new Kinematics drum with Twister drive and levelwind, aluminum picking boom, and (2) PL-2 Pullmasters. Electronics include GPS, VHF, radar, sounder, ComNav autopilot, and computer w/ Nobeltec. Great combination vessel with lots of recent upgrades. Call for survey. Asking $145,000.
$575,000
thumbnail featured listing CR18-014  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 53    Hull: Fiberglass    Builder: Delta/LeClerq    Location: Alaska
53'x15.6'x7' fiberglass seiner, built by Delta in 1980 as 48', stretched to 53'. 60 Series GMC main, new in 2013, rated at 450 hp. 50 kw Isuzu gen set. Packs appr 60,000# in 2 holds, 18 ton IMS RSW system. Electronics include (2) Furuno radar, (2) VHF, Furuno sounder, GPS, computer w/ Nobeltec, ComNav autopilot and more. Asking $575,000.
$350,000
thumbnail CR18-012  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1996    Length: 42    Hull: Fiberglass    Builder: Dixon, Nova Scotia, Canada    Location: California
42'x15.3'x4' fiberglass combination 'lobster style' boat, rigged for spot prawns w/ 3.5' stainless open stern extension. Built by Dixon in 1996. John Deere 6090 main, new in Dec 2017, rated for 300 hp at 1700 rpm. Twin Disc 5082, new Dec 2017. 12.5 kW Kubota genset w/ approx. 3k hours. Packs 2,000 lbs in (4) insulated holds, plumbed for live prawn w/ RSW and air. Pac West 3-ton RSW system, and complete spare system (new in box). Electronics include GPS/Plotter, Furuno sounder, Furuno radar, (2) VHF, and ComNav 1001 autopilot. Junes 15" crab block, davit, (500) Fathoms Plus traps, (300) spare traps, lines, buoys, and more. CA Spot Prawn Tier-1 Permit available. Turn-key operation with lots of recent upgrades. Call for more information and package pricing. Asking $350,000 for boat alone.
$27,000
thumbnail CR18-013  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1977    Length: 31    Hull: Fiberglass    Builder: Uniflite    Location: California
31'x11'x3.5' fiberglass combination crabber/troller built by Uniflite in 1977. John Deere 6068TFM rated at 201 hp w/ Borg Warner Velvet drive. Packs 2500 lbs in (3) fish holds. 3 spool Kolstrand gurdies, (2) hayracks and Junes block w/ hydraulic knuckle boom. RSW system needs work. Electronics includes (2) GPS, (2) Standard VHF, Furuno radar, Furuno sounder, inverter, autopilot and Honda 2000 gen. for sodium light. (2) berths, heater and stove. Reduced to $27,000.
$255,000
thumbnail CR18-011  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1989    Length: 46    Hull: Aluminum    Location: Washington
46'x15'x5.9' aluminum combination vessel, built by Bill Redding in 1989. Tier 2 John Deere 6068T main, rated at 250 hp, and ZF reduction gear. Isuzu C240 w/ 20 kW Lima Mac generator. 800 gallon fuel capacity in (2) tanks. Setup to blast freeze with Carrier 056 compressor, new 10 hp motor. Fish hold packs 6.5 tons of frozen albacore. (2) 3-spool Easthope gurdies, Hydroslave line hauler, and salmon/troll gear. Electronics include GPS, VHF, SSB, radar, Furuno sounder, ComNav 2001 autopilot, and Global Star satellite phone. CA salmon permit included, and OR salmon permit available. Versatile boat with great history. Call for survey and more info. Asking $255,000.
$85,000
thumbnail CR18-010  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1989    Length: 32    Hull: Fiberglass    Builder: Sunnfjord    Location: California
32'x14'x5' fiberglass troller, rigged for crab, built by Sunnfjord in 1989. 6-cylinder John Deere main rated at 120 hp, w/ Velvet gear. Fuel capacity of 400 gallons in (2) tanks. 24 gpm Gresen hydraulic pump. Fish hold packs 3,200# crab in aluminum insert, and 2,000# salmon in insulated insert. Deck equipment includes Warren Junes bait chopper, davit, and 15" hauler. Electronic equipment includes GPS, (2) VHF, radar, Garmin plotter, Simrad AP24 autopilot, and 2000 watt inverter. CA salmon troll permit included. Asking $85,000, offers encouraged.
$49,000
thumbnail CR18-009  Crabbers You must be logged in to watch items for updates. You can click here to go to the Login / Registration page...
Year: 1980    Length: 30    Hull: Fiberglass    Builder: Wilson Boats    Location: California
30'x10.5'x4' fiberglass combination vessel built by Wilson in 1980, and rigged for multiple fisheries. 210 hp Cummins main w/ 3,700 hours. Borg Warner T3 gear. Cruises at 18 knots burning 5 gph, top speed of 22 knots. Packs 5,000 lbs in fiberglass hold. 12" Junes crab block, and 300 gallon live well. Electronics include GPS, VHF, radar sounder, plotter, and auto pilot. Asking $49,000.
Web Design, 3 Crown Creative